Ubiquiti Quick-Mount User manual

Mount Arm Universal Ball Mount Bracket Mount
Rotation Collar Stacking Washer Ball Mount Washer
Package Contents
Supported Products
The Quick Mount is compatible with the GigaBeam™, LTU™ Lite, NanoBeam®,
NanoStation®, NanoStationloco, and UniFi® Building-to-Building Bridge.
NBE-2AC-13, NBE-M5-16, UBB, or GBE using the Universal Ball Mount
NBE-5AC-Gen2 or NBE-M5-19 using the Universal Ball Mount and Metal Washer
loco5AC, NS-5AC, or LTU-Lite using the Ball Mount Assembly
Hardware Overview
Quick-Mount Quick Start Guide

Stacking Washer
Rotation Collar
Mount Arm
Ball Mount Washer
Universal Ball Mount
Bracket Mount
Part of the Quick-Mount assembly that locks the Rotation Collar into place.
Part of the Quick-Mount assembly that stabilizes the base of the Mount Arm.
Adjustable mount compatible with a variety of Ubiquiti CPE devices.
Used in conjunction with the Universal Ball Mount when installing the
NBE ‑ 5AC ‑ Gen2 or NBE-M5-19.
Used when installing the NBE-5AC-Gen2, NBE-2AC-13, NBE-M5-19, NBE-M5-16, UBB,
or GBE.
Used when installing the loco5AC, NS ‑ 5AC, or LTU-Lite.
Quick-Mount Quick Start Guide

Models
NBE-2AC-13
NBE-M5-16
UBB
GBE
Components
Note: The device’s Lock Ring will also be used.
Models
NBE-5AC-Gen2
NBE-M5-19
Quick-Mount Quick Start Guide

Components
Note: The device’s Lock Ring will also be used.
Models
loco5AC
NS-5AC
LTU-Lite
Components
Quick-Mount Quick Start Guide

Installation
Before You Begin
Insert the Mount Arm into the Rotation Collar and press until it is locked in.
Quick-Mount Quick Start Guide

Note: The screw end should extend past the Rotation Collar for installation, as
shown below.
Quick-Mount Quick Start Guide

1.
Optional
Quick-Mount Quick Start Guide

2.
Quick-Mount Quick Start Guide

3.
4.
Quick-Mount Quick Start Guide

5.
Note: Add the Ball Mount Washer when installing the NBE-5AC-Gen2 or
NBE-M5-19.
OR
Quick-Mount Quick Start Guide