6
Using the Touch
screen
Your device comes with a responsive touch screen which works as follows:
•Tap: To activate an on-screen item (e.g., application icons, buttons, menu items, and the
letter/symbols of the on-screen keyboard), simply tap them with your fingertip
or
compatible
stylus.
•
Double
Tap: Quickly tap the screen twice on a webpage or other application screen to zoom (the
application must support the double-tap/zoom function). Within the browser, double-tapping a
webpage section will cause the browser to zoom and fit that section to the width of the screen.
•
Drag
and drop: Drag an on-screen item to change its position (e.g., an application
Icon on the home screen). To drag an item, touch and hold it for a moment, then without lifting
your fingertip/stylus, move your fingertip/stylus on the screen until the item reaches its target
destination.
•Swipe: Swipe up/down on the screen to scroll through a list. On some screens, you may be able to
swipe left/right to change the view. To swipe, touch the screen and then quickly move your
fingertip/stylus across the screen without lifting your fingertip/stylus. Do not pause on the screen
with your fingertip/stylus at the initial point of contact or you may accidentally drag an item instead.
•Tap and hold: Some on-screen items have an alternate action
if
you touch and hold it
(e.g., opening an alternate menu, or to activate the drag function). To touch and hold an item, touch
the item and do not lift your fingertip/stylus until the action occurs. Tapping and holding an icon
will allow you to move it once it appears large.
Note: It is very important that you do not touch the screen with a body part or any foreign
object while switching on the device as this may interfere with the proper functioning of the device.
To avoid damage to the touch screen, do not use sharp tools. Do not allow the touch screen to come
into contact with other electrical devices, or water. For optimal use, remove the screen protection
film before using your device.
Using Micro SD
Cards
Micro SD Cards are storage spaces used to transport files from one device to another. This device
supports many different types of cards up to 32GB in size, however not every Micro SD card will
work in the device.
To insert the Micro SD card, simply push it into the device (it can only fit in one way, with the gold
contacts facing up towards the side with the touch screen). To remove the Micro SD card, you must
first go into System Settings (by tapping
“t
" shortcut, then tap “Storage" and scroll down on the
right hand side until you see Unmounts SD card. Accept the unmounts and then push down on
the top of the Micro SD card and it will pop back up to be removed.
To access files on the Micro SD card, use the “File Managed’ application described below.
