UB+ EUPHO E2+ SOLACE User manual

EUPHO E2+ SOLACE
QUICK START GUIDE
MODEL : M05
FOR MORE INFOMATION . PLEASE VISIT WWW.UB-PLUS.COM
E2+
Ver1.0

CONGRATULATIONS
You are now the proud owner of a UB+
EUPHO E2+ SOLACE Speaker incorpo-
rates the best elements of traditional
speaker design and the latest audio
technology, to create a large size speaker,
that is suited for wireless devices in this
age of mobility.
Please contact us
if you have any comments
or questions.
Do not throw on the public highway Printed in china
Scan me!
To give your opinion
on your UB+ EUPHO E2+
SOLACE @ubplusofficial

CONTROLS
*only when speaker is switched on
TWS pairing mode
Full shutdown
Power on / standby
3s
5s
Volume down
X1
X1 Bluetooth pairing mode
3s
Volume up
X1

BASIC FUNCTIONS
SWITCHING ON AND OFF
Press the Power button to turn the speaker on.
Press and hold the Power button 5sec to turn the speaker off.
BLUETOOTH PAIRING WITH DEVICE
Press and hold the Power button for the speaker to enter into
Bluetooth pairing mode.
There will be "pairing " audio feedback from the speaker and it will
sound out an indicative tone when it is paired.
STANDBY
Press the button to put the speaker in standby mode
Press the button to exit standby mode
Press again to reconnect the last used Bluetooth device(s).
TRUE WIRELESS STEREO (TWS) PAIRING BETWEEN TWO
EUPHO E2+ SPEAKERS
Only if you have two UB+ EUPHO E2+ speakers
1. Press and hold both the Volume down button and the
Volume up button together and the speaker will go into TWS
pairing mode.
2. The paired speakers would be paired automatically to each
other if there are in proximity to each other.

ASSEMBLE
STRAP
WOODEN STAND

PORTS
Power/ USB In Type C
Aux In

1.The product (including relevant accessories), DO NOT expose under direct
sunlight over a long period. Suggest for indoor usage, the area of usage
should be dry to prevent spoilage.
2.Battery charging 0-45℃. Temperature during usage 0-50℃
3.Install the product according to the instruction against hazard to your body
due to fall over.
4.Pay attention to the cables between equipment against stumble hazard.
5.The product is not a toy; please keep it away from Kids.
6.Use only the standard USB ports certified according to IEC60950-1 as LPS or
IEC62368-1as PS2.
7.Product with Lithium batteries, please keep far away from excessive heat
such as direct sunlight, fire, heatsink or high heat
8.No user replace parts inside the product
9.Do not open the enclosure in case of electric shock hazard.
10.Do not use wet hands to handle the product.
11.Clean the product with a soft, dry cloth only.
12.Unplug the DC power if smoke, abnormal sound, abnormal smell,
excessive heat or fire occur.
13.Any abnormal phenomenon, please inform your local importer or local
after sales service office.
14.Once the product out of service, please handle the waste according to the
local regulations.
15. For safety reasons, DO not dispose the battery where there is high heat ,
water or acid environment.
16. Hanging of the speaker should not exceed the height of 2meters.
Mounting parts onto ceiling wall must withstand 4X of the weight of the
equipment.

IMPORTANT SAFETY INSTRUCTIONS
Additional Warning for Battery (pack)
1. Lithium-ion batteries used in the product may expose fire or
explosion hazards if misuse.
2. Batteries shall not be exposed to excessive heat or fire in case of
explosion.
3. Don’t handle leaking or damaged batteries.
4. Dispose of used batteries according to local regulation correctly.
WARRANTY
This appliance is guaranteed for 24 months from the date of purchase. In
the event of a breakdown, contact your dealer. Proof of purchase will be
required for any service requested during the warranty period. This
warranty will not apply in the event of failure caused by an accident or
similar incident or damage, liquid ingress, negligence, misuse, lack of
maintenance or any other circumstances on the part of the user.
In order to avoid hearing damage
possible, do not listen to a high
noise level for a long time

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
UB+ hereby declares that this product is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU and
all other EU directive requirements. The complete declaration of
conformity can be found at: www.ub-plus.com compliance
Frequency band of operation 2400 to 2480 MHz
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:

WHAT’S IN THE BOX
EUPHO E2+ SOLACE Speaker
•
•
Quick start guide
• USB cable
FEDERAL COMMUNICATIONS COMMISSION REGULATORY
INFORMATION (FCC)
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
Tabletop base
Leather strap
Tripod wooden stand with base plate
This manual suits for next models
1
Table of contents
Other UB+ Speakers manuals