UB+ EUPHO E3 User manual

UB+
EUPHO E3
SPEAKER
USER MANUAL

2 3
CONGRATULATIONS
You are now the owner of a UB+ EUPHO E3 Speaker. The UB+ EUPHO E3
Speaker incorporates the best elements of traditional speaker design and
the latest audio technology, to create a large size speaker, that is suited for
wireless devices in this age of mobility.
Please contact us if you have any comments or questions.
ubplussg | www.ub-plus.com
1 YEAR LIMITED HARDWARE
WARRANTY & REGISTRATION
The warranty does not cover any damage caused by misuse or neglect.
To register your EUPHO E3 for warranty, simply scan the QR code
at the back of the speaker and follow the instructions on the screen.
Alternatively,you may wish to visit ub-plus.com/warranty
Please also remember to retain your proof of purchase in order for the
warranty to be valid.
WHAT’S IN THE BOX
• UB+ EUPHO E3 Speaker
• Tabletop base
• Freestanding base for legs (with camera tripod mount)
• Solid wood legs x 3
• Leather strap
• Quick start guide
INSTALLING THE STRAP

4 5
POSITIONS
With tabletop base With freestanding base, attached to
wooden legs
With freestanding base, attached
to camera tripod (not included in
package), for variable height
Hung up by the strap

6 7
CHARGING THE SPEAKER The EUPHO E3 goes into standby mode, as represented by the breathing
Bluetooth light to conserve energy, if there is no Bluetooth connection. The
EUPHO E3 shuts itself down after another 10 minutes of inactivity. During
standby mode, press any button to activiate the speaker.
When the battery level drops to below 10%, there will be an intermittent
alert sound to indicate the low battery status.
YoucanndoutthebatterylevelbypressingthePowerbutton.
The battery level will be represented by the number of EQ Mode lights being
lit, one light being 25% and four lights being 100%. This function is only
valid when the speaker is switched on.
Connect the USB cable to
the plug and to the micro
USB port on the EUPHO E3.
When the cable is plugged
in to the electricity outlet,
the EUPHO E3 will start to
charge as represented by the
red light.
The red light will go off when
charging is completed.
Note: The USB cable and
plug are not included with
the package.

8 9
BLUETOOTH PAIRING WITH DEVICE
1. Press and hold the Bluetooth button for the speaker to enter into
Bluetooth pairing mode, as represented by the blinking blue light
above the Bluetooth button.
2. Turn on Bluetooth on your device and select “UB+ EUPHO E3” from
the list of devices.
3. There will be a beep and the Bluetooth light will stay lit when pairing
is successful.
Note: The last paired device will be connected to the speaker automatically
if it is available, after the EUPHO E3 is switched on.
SWITCHING ON
1. Press the Power button to turn the speaker on.
SWITCHING OFF
1. Press and hold the Power button to turn the speaker off.

10 11
VOLUME CONTROL
Press the volume control button to adjust the volume of the speaker up or
down. There will be a beep when the maximum volume is reached.
PLAYING MEDIA
Media can be played or paused by pressing the Bluetooth button .
SPEAKERPHONE
When the EUPHO E3 is connected to your phone via Bluetooth, it can act
as a speakerphone. You can press the Bluetooth button to accept the call or
press and hold the Bluetooth button for 3 seconds to reject the call, when a
call comes in.
Volume upVolume down

12 13
3D MODE
Press the 3D button to turn the 3D Mode on or off. The 3D Mode light is lit
when 3D mode is switched on.
The 3D Mode, in conjunction with the EQ Modes, allows the EUPHO E3 to
beexibleandadapttoyourneeds.
ADJUSTING EQ
The EUPHO E3 comes with three preset EQ modes - MOVIE, VOCAL and
OUTDOOR. A fourth EQ mode - MYEQ, is one that you can personalize
through the EUPHO app (for all phones) or through the GAIA app (for
phones operating on Android system).
TheEUPHOE3isinDefaultmodewhenrstswitchedon.PresstheEQ
button to toggle between the different modes, as represented by the
respective EQ Mode lights. When no EQ light is lit, the EUPHO E3 is in
Default mode. When MYEQ Mode is not personalized, the EQ would also be
set as Default.

14 15
TRUE WIRELESS STEREO (TWS)
PAIRING BETWEEN TWO EUPHO E3
SPEAKERS
1. Press and hold both the Volume up button and the Volume down
button together for 3 seconds for the speaker to go into TWS
pairing mode. Both the white lights beside the L and R labels will
ashalternatelyfor3seconds,beforetheblueBluetoothlightstarts
to blink.
2. Repeat this step for the other speaker.
3. Both speakers would be paired automatically to each other if there
areinproximitytoeachother.TherstspeakertogointoTWSpairing
mode would be playing the left channel as represented by the L
light, while the other speaker would be playing the right channel as
represented by the R light.
4. To toggle the channels between the speakers, press both the Volume
up and Volume down buttons together. Each speaker can either be
playing the left channel, the right channel or be playing both channels
together, as indicated by the L or R lights.

16 17
OTHER INPUTS
Other than Bluetooth,
there are other inputs that
can work with the EUPHO
E3. Note: Cables are not
included in this package.
The inputs are prioritised in
this order - Bluetooth, USB
and then optical.
The 3.5mm auxillary input
will override the rest of the
inputs when the aux cable
is plugged into the speaker.
The speaker will restart when
the cable is plugged out.
This ensures that the EUPHO
E3 can be safely used as a
microphone or instrument
speaker with no potential
interruption from other
sources.
OTHER FUNCTIONS & CONTROLS
• PURGING LIST OF SAVED BLUETOOTH DEVICES
Press both the Bluetoth button and the Volume down button together to
purge the list of saved Bluetooth devices. The Bluetooth light and the TWS
L light will blink ten times to signify the successful purge.
• POWERBANK FUNCTION
The EUPHO E3 can also be used as a powerbank
through the USB port to charge mobile devices on
the go.
USB
Optical
Aux

18
SPECIFICATIONS
Driver: 6.5” full range
Output: 25 W
Sensitivity: 89 dB
Puredigitalamplier:60W
Frequency response: 35 Hz - 16 kHz
Impedance: 4 Ohms
Battery capacity: 2200 mAh
Battery charging voltage: 5 V (USB)
Inputs: Bluetooth, USB digital, 3.5 analogue, optical
Bluetooth: Stereo, TWS, aptX
Dimensions: W375 x D355 x H357 mm | W14.8 x D14.0 x H14.1 in
Enclosure diameter: 360 mm | 14.2 in
Weight: 1.5 kg | 4.4 lbs
Height (mounted on tabletop base): 360 mm | 14.2 in
Height (mounted on legs): 974 mm | 38.3 in