UB+ EUPHO E2 User manual

CONGRATULATIONS
You are now the owner of a UB+ EUPHO
E2 Speaker. The UB+ EUPHO E2 Speaker
incorporates the best elements of
traditional speaker design and the latest
audio technology, to create a large size
speaker, that is suited for wireless devices
in this age of mobility.
This quick guide is meant to be a simple
introduction to the usage of the speaker.
The full manual can be downloaded from
the UB+ website (ub-plus.com/images/
Files/EUPHO_E2-User_Manual.pdf) or by
scanning the QR code below.
ubplussg
www.ub-plus.com
Please contact us if
you have any
comments or
questions.
ubplussg
WHAT’S IN THE BOX
• UB+ EUPHO E2 Speaker
• Quick start guide
• USB cable
FEDERAL COMMUNICATIONS COMMISSION REGULATORY
INFORMATION (FCC)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
32
EUPHO E2
QUICK START GUIDE
MODEL : M5
FOR MORE INFOMATION . PLEASE VISIT WWW.UB-PLUS.COM
Elegance Series E2
Tabletop base
Leather strap

PORTS
CONTROLS
TWS pairing mode
Volume down
Power off
Power on
Volume up
Toggle between TWS modes
(L/R. R/L, Mono)
3s
3s
1s *only when speaker is switched on
X1
X1 Bluetooth pairing mode
Turn on paring by
pressing
3s
X1
5 6
Power/ USB In Type C Aux In
ASSEMBLE
STRAP

8 97
BASIC FUNCTIONS
SWITCHING ON AND OFF
Press the Power button to turn the speaker on.
Press and hold the Power button to turn the speaker off.
BLUETOOTH PAIRING WITH DEVICE
Press and hold the Power button for the speaker to enter into
Bluetooth pairing mode.
There will be a sound feeback “pairing” from the speaker when
pairing is successful.
Note: The last paired device will be connected to the speaker
automatically if it is available, after the EUPHO E2 Lite is switched on.
TRUE WIRELESS STEREO (TWS) PAIRING BETWEEN TWO EUPHO
E2 Lite SPEAKERS
1. Press and hold both the Volume down button and the
Volume up button together and the speaker will go into TWS
pairing mode.
2. The paired speakers would be paired automatically to each
other if there are in proximity to each other.
IMPORTANT SAFETY INSTRUCTIONS
1. The product (including relevant accessories), DO NOT expose under
direct sunlight over a long period of time.
2. Operating temperature between 0-50℃.
3. Install the product according to the instruction against hazard to
your body due to fall over.
4. Pay attention to the cables between equipments against stumble
hazard.
5. The product is not a toy, please keep it away from Kids.
6. Use only the external power supply provided with the product or the
standard USB ports certified according to IEC60950-1 as Limited
power source.
7. Product with Lithium batteries, please keep far away excessive heat
such as direct sunshine, fire, heatsink or the like.
8. No user replace parts inside the product.
9. Don’t open the enclosure in case of electric shock hazard.
10. Don’t use wet hands to handle the product.
11. Clean the product with a soft, dry cloth only.
12. Unplug the DC power if smoke, abnormal sound, abnormal smell,
excessive heat or fire occur.
13. Any abnormal phenomenon, please inform your local importer or
local after sales service office.
14. Once the product out of service, please handle the waste according
to the local regulations.
IMPORTANT SAFETY INSTRUCTIONS
Additional Warning for Battery (pack)
1. Lithium-ion batteries used in the product may expose fire or
explosion hazards if misuse.
2. Batteries shall not be exposed to excessive heat or fire in case of
explosion.
3. Don’t handle leaking or damaged batteries.
4. Dispose of used batteries according to local regulation correctly.

11
10
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
ub-plus.com
警告：请按照说明书要求固定和放置产品，注意不当的摆放
可能会被碰倒造成砸伤危险
警告：请使用规定的外部直流电源，外部直流电源满足
IEC60950-1 LPS要求
警告：防止进水造成内部电池短路引起爆炸或起火危险
警告：远离火源或直射阳光；内含电池禁止将产品或电池投
入明火，会引起爆炸危险
警告：请按照当地法规处理电子废弃物和电池
警告：不要给小孩子作为玩具当连接外部接线，
请原理走道 ，防止绊倒和产品跌落造成的危险
重要安全说明