UCEC USB 2.0 UVC User manual

1
UCEC USB 2.0 UVC
Video Capture All in One
Quick Start Guide
Thanks for your support, UCEC USB2.0 UVC Video Capture product. The following steps will guides you how to
set it up. Hope this device will bring you nice digital experience.
IMPORTANT: The included software is for windows. If you use Macbook, you can directly use the QuickTime
Player to capture your video, But if you use Windows Computer, here provide you with 2 types of video capture
and edit software ( VHS to DVD 3.0 SE and OBS Studio) , you can install any one of them depending on your
needs.
BOX CONTENTS
● UCEC USB2.0 UVC Video Capture
● Software CD and Quick Start Guide
● Composite (RCA) Cable
NOTE:
UCEC provides 24-hour technical support. Please feel free to contact us if you have any questions. If you are not
satisfied with our products, UCEC offers 30-day money-back guarantee.
CONTACT US:
♦ Send the message to us by your order detail page. (Reply within 24 hours)
♦ Or send your Email to this address : [e-mail] (Reply as soon as possible)
Our goal is to bring you the best shopping experience on Amazon. We’d really appreciate it if
you can share your experience with our product on Amazon.

2
Contents
Part 1. Connections............................................................................................................................... 2
♦ OVERVIEW...................................................................................................................................2
♦ The function of each port of UCEC All-in-One Video Capture..............................................3
♦ Connection Types........................................................................................................................ 3
Part 2. How to use UCEC All-in-One Video Capture on MacBook................................................ 4
►Steps:............................................................................................................................................ 4
Part 3. How to capture video on Windows Computer?.................................................................... 9
♦ How to use Honestech VHS to DVD 3.0 on Windows Computer?...................................... 9
1. Install the drivers.....................................................................................................................9
2. Install VHS to DVD 3.0SE..................................................................................................... 9
3. Starting honestech VHS to DVD 3.0....................................................................................9
♦ How to use OBS Studio on Windows Computer?.................................................................14
1. Install the drivers..................................................................................................................14
2. Install OBS Studio................................................................................................................14
3. Starting OBS Studio............................................................................................................ 14
4. Some Personalized Settings..............................................................................................20
Part 4. Troubleshooting....................................................................................................................... 21
1. Installation Problems...............................................................................................................21
2. Video Problems........................................................................................................................21
2.1 No video......................................................................................................................................20
2.2 Black & White video................................................................................................................... 20
2.3 Choppy video or Choppy audio...................................................................................................20
2.4 Can't recognize this video capture when is plugged into any of the USB
Port?................................................................................................................................................ 21
3. Converting PAL / NTSC (and other video standards)...................................................22

3
Part 1. Connections
♦OVERVIEW
♦The function of each port of UCEC All-in-One Video Capture
1. USB PORT – Connect the USB port of device to an available USB 2.0 port on your computer (preferably a port
on the real panel).
2. AUDIO INPUTS (red and white) – Use standard RCA cables to connect these left and right audio inputs to
the left and right audio outputs of your playback device. Be sure to match the colors properly – red to red (right
channel), white to white (left channel).

4
3. COMPOSITE VIDEO INPUT (yellow) – Use a standard composite video cable to connect this input to the
composite video output of your playback device.
4. S-VIDEO INPUT (black) – Use a standard S-Video cable to connect this input to the S-Video output of your
playback device.
♦ Connection Types
There are two kinds of video connection types: RCA(Composite) or S-Video. You only can choose one of
them.
● RCA(Composite) Connection：
● S-Video Connection:
If your camcorder has a standard S-Video output connection, use the appropriate S-video and
composite audio connection(White & Red Port). An extra S-video cable is necessary for it.
S-Video cables can transmit a higher quality video signal than regular RCA (Composite) cables,
but they do not carry an audio signal. RCA (Composite) audio cables are still required when
You are making an S-Video connection.
NOTES:
●To capture a video’s sound, connect the left and right AUDIO INPUTS to the left and right audio outputs of your
playback device.
●To capture video with scart output, you should buy one scart-composite converter.
●Please don’t connect composite video and S-Video at the same time.

5
Part 2. How to use UCEC All-in-One Video Capture On
MacBook
The software that we provided is for Windows computer. So if you use Macbook or iMac, you can directly use
QuickTime Player to capture your video.
►Steps:
1. Connect the RCA cable to the video capture card and your VCR, Digital Camcorder, DVD player, TV. Insert the
USB port of the Video capture card to your MacBook. Wait a minute and the system will automatically install the
hardware drivers.
2. Open QuickTime Player. You can find the software by going to Applications –QuickTime Player. (Next
Page)

6
3. After the software opens, click the File menu and select New Movie Recording.
4. Click the Drop Box next to Red Record icon, and select AV TO USB2.0 under Camera and Microphone
option. (Next Page)

7
5. To start recording. Play your video source (connected to Video Capture device), click Red Record icon to start
recording. The Red Record icon will turn grey. You can adjust the volume by drag the volume bar. (Next Page)
Drop Box

8
6. When you are done capturing your video, click Grey Stop Recording icon in the screen to stop recording.
QuickTime Player automatically saves your captured videos as .mov file.
For more information on using QuickTime Player, please click Help on panel.

9
Part 3. How to capture video on Windows Computer?
You can install VHS to DVD 3.0 SE or OBS Studio to capture your videos. We recommend you to install VHS
to DVD 3.0 SE which is easy to use, supports burning to DVD, and can be shared on social media. Or you can
choose OBS Studio, Because can provide you more output settings.
♦ How to use Honestech VHS to DVD 3.0 on Windows Computer?
1. Install the drivers
Connect the RCA cable to the video capture card and your VCR, Digital Camcorder, DVD player, TV. Insert the USB
port of the Video capture card to your Computer. Wait a minute and the system will automatically detect and install
the hardware drivers.
2. Install VHS to DVD 3.0SE
2.1 Disable any Anti-Virus or Anti-Spyware.Insert the CD into your computer’s CD drive. Double click MY
Computer then double click the CD. Once the CD’s contents are show up, Open the folder “Honestech VHS to
DVD 3.0 SE”, double click Setup.exe.
2.2 Click “Next” to continue to install the software. Read the License Agreement. Click [Next >] after accepting the
License Agreement to continue with the installation. Choose the setup language and click “Next” to continue. The
setup status screen will display the installation progress. Please wait until is complete.
2.3 After the installation is finished, click Exit and eject the CD. We recommend restarting your computer once
more before using the software.
3. Starting honestech VHS to DVD 3.0
3.1 Double-click the “honestech VHS to DVD 3.0 SE” icon on your desktop. You need to enter the Product Key
when you use this software for the first time. The Product Key is printed on the sticker on the CD sleeve.

10
3.2 Click on the (1.Capture tab) in the upper left-hand comer of the screen. Click the Option tab in the bottom
right of the screen.
3.3 Click the drop-down box next to Video menu, and select AV TO USB2.0 from the list and Click the
drop-down box next to Audio menu and select AV TO USB2.0 from the list. (Next Page)