ULTRA-LINK ESSENTIAL Series User manual

Introduction
1. 270-degree Game steering wheel is compatible with PS3 / PS4 / XBOX
ONE / XBOX360 / PC / NS SWITCH / Android and other devices.
For PS3/PC/NS SWITCH/ANDROID, you can directly use the game racing
wheel to play games.
2. For PS4/XBOX ONE/XBOX 360 only one extra step is required: you need
the original game controller for guidance. The specific method is: connect the
USB cable of the PS4 / XBOX ONE / XBOX360 controller to the controller
interface behind the gaming steering wheel.
3. The accelerator pedal, brake pedal and handbrake of the steering wheel
have programmable key function. The height of the steering wheel can be
raised by 5cm. The angle of the steering wheel can be adjusted in three ways
with motor vibration function.
See all functions on the next 2 pages

Function key introduction:
1. Function button RT.
2. Function button LT.
3. Function button X.
4. Function button Y.
5. Function button B.
6. Function button A,
7. Select / Back button.
8. Start /pause key START.
9. HOME key: X input mode and Direct input mode switch key, only for PC use.
After power on, the default is X input mode. To switch between the two modes
without restarting, press the HOME button for 3 seconds to complete the
switch; when using the PS3/PS4/XBOX360/XBOX One platform, this button is
the menu button.
10. Function button RSB.
11. Programming button Programming, this button is used to set the
programming acceleration (Right Pedal) / brake (Left Pedal) pedal / hand
brake (Hand brake controller) / Shift lever. The above three function keys can
be programmed as any key among A/B/X/Y/LB/RB. Operation method: When
the steering wheel and the host are connected normally, first press the
Programming button, the blue light of the programming indicator is on, press
the button to be programmed, the programming indicator flashes, press the
button to be programmed, the programming indicator goes out, and the
programming is completed. Restore the default operation method: long press
the START and BACK buttons at the same time, wait until the programming
indicator flashes three times, release the START and BACK buttons to
complete the restoration to the default.

12. Function buttons LSB.
13. Mode LED (red)/programming LED (blue).
14. Arrow keys UP/Down/Left/Right.
15. Shift lever.
16. Handbrake Hand brake controller.
17. The accelerator pedal Right Pedal.
18. Left Pedal of the brake pedal.
19. Function button LB.
20. Function button RB.
21. Acceleration /brake pedal interface.
22. Shift lever / handbrake interface.
23. Original controller USB Interface (connected PS4 / XBOX 360 / XBOX
controller). For example: Play PS4 games need to PS4 original controller into
this Interface; play XBOX One racing game you need to XBOX One original
insertion controller interface here.
24. Connect the USB cable of the game console.
25. Steering wheel sensitivity setting
Sensitivity has three gears: low, medium and high. The default is low.
Enhance sensitivity: press and hold "PR" key, press "UP" key again, release
button, mode light will flash.
Reduce sensitivity: press and hold the "PR" key, press the direction key
"DOWN" again, release the key, and the mode light will flash.

(Installation diagram)
Installation instructions:
1. Choose a table that is convenient for you to operate the gaming steering
wheel. The table surface should be smooth. First put a piece of A4 paper on
the table, take out the steering wheel from the packing box, and put the
steering wheel on the paper on the table.
2. Place the shift lever / handbrake seat on the right side of the steering wheel.
Align the installation slot at the bottom right of the steering wheel with the
mounting clip on the left side of the shift lever seat, and then clip them together.
Connect the a end of the USB cable (accessories: 1.0 m long) with the USB
port on the shift lever / handbrake seat; connect the B end of the USB cable
with the micro USB port of the shift lever / handbrake base on the steering
wheel.
3. Place the accelerator / brake pedal on your lower right. Connect the a end of
the USB cable (accessories: 1.5m long) with the USB port on the accelerator /
brake pedal; connect the B end of the USB cable with the micro USB port of
the accelerator / brake pedal on the steering wheel.
4. Adjust the height of the steering wheel to the height that you are satisfied
with, and adjust the angle of the steering wheel to the angle that you are
satisfied with.

5. Take out the A4 paper at the bottom of the steering wheel. Press the four
suction cups at the bottom of the steering wheel onto the table top. Press the
three suction cups at the bottom of the shift lever / handbrake seat onto the
table. Installation completed.
Gear Shift placement
The gear shift lever can be placed on the left or right of the steering wheel
Gaming steering wheel height adjustment
Push the height adjustment lock on the right side of the steering wheel to the
Unlock position, pull up or down or push the steering wheel, select a
satisfactory height, and push the height adjustment lock to the Lock position.

There are three steering wheel angles to choose from, which are 30 degrees /
75 degrees / 90 degrees. Push the steering wheel angle adjustment lock to the
unlock position, adjust the steering wheel angle up or down, select a
satisfactory angle, and push the angle adjustment lock to the lock position.
(Game steering wheel angle adjustment)
Connecting an Android device
Connect the game steering wheel pedal and shift lever to the steering wheel
correctly. Press and hold the LSB + RSB button on the steering wheel at the
same time. Connect the game steering wheel USB cable to the USB port of the
Android device. If the connection is successful, the mode LED on the gaming
steering wheel will switch on.
(Android connection diagram)

Connect to Nintendo Switch
Connect the steering wheel pedal and shift lever to the steering wheel correctly.
Connect the steering wheel USB cable to the USB port of the Nintendo Switch.
If the connection is successful, the mode led on the steering wheel will be on.
(NS SWITCH connection diagram)
Game recommendation
NS SWITCH
Mario Kart 8

Connect to PS4/Xbox one/Xbox 360
Connect to PS4 game console
Connect the steering wheel pedal and shift lever to the steering wheel
correctly. Connect the original PS4 controller to the steering wheel controller
guide USB port. Connect the steering wheel USB cable to the USB port of the
PS4 game console. If the connection is successful, the mode led on the
steering wheel will be on.
PS4
GTA5
The Crew Wild Run
Assetto Corsa
Se Bastien Loeb Rally RVO
F1 2016
F1 2015
Racing cars
Table Top Racing: World
Tour
Gran Turismo Sport
Game recommendation
Control not working
Please note: Orignal console/controller must be used, If the control is not
connected to the steering wheel, the wheel will automatically disconnect
after 10 min.

(PS4 connection diagram)
Connect to XBOX ONE
Connect the game steering wheel pedal and shift lever to the steering wheel
correctly. Connect the original XBOX ONE controller to the steering wheel
controller guide USB port. Connect the steering wheel USB cable to the USB
port of the XBOX ONE game console. If the connection is successful, the
mode led on the steering wheel will be on.
(XBOX ONE connection diagram)
Game recommendation