Ultra Viev AP-15 User manual

UM-UV-621-15-Q413V4 www.austin-hughes.com
User Manual
dedicated LCD display solutions
Designed and manufactured by Austin Hughes
NAP-15
Aluminum front bezel
OP-15
Universal Mounting Open Frame
AP-15
15” LCD
Front NEMA4 / IP65

UM-UV-621-15-Q413V4 www.austin-hughes.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
■Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■Any product, on which the serial number has been defaced, modified or removed.
■Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■Re-position or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

UM-UV-621-15-Q413V4 www.austin-hughes.com
Contents
< Part. 1 > AP-15 / NAP-15
1.1 Package Content
1.2 Structure Diagram & Dimension
1.3 Mounting Hardware & Installation
P. 1
P.2 - 3
P.4 - 5
< Part. 4 > Options
4.1 Option Table
4.2 AV2.2 Upgrade : S-Video + BNC & Audio
4.3 Projected Capacitive ( 4-point touch )
Resistive / Capacitive ( single point touch )
4.4 48V, 24V or 12VDC power
4.5 TV ( Analog )
P.13
P.14
P.15 - 16
P.16
P.17 - 18
< Part. 2 > OP-15
2.1 Package Content
2.2 Structure Diagram & Dimension
2.3 Mounting Hardware & Installation
P. 6
P.7 - 8
P. 9
< Part. 3 > Specifications / OSD
3.1 Product Specifications
3.2 On-screen Display Operation ( OSD )
P.10 - 11
P.12

UM-UV-621-15-Q413V4 www.austin-hughes.com
■It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
How To Clean Your LCD Monitor
Caution :
■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
Disconnect the power cord.
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
1
2
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
Disconnect the power cord.
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Gently wipe the surface. Use as little pressure as possible.
Wait until your monitor is completely dry before plugging it in and powering it up.
1
2
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
3
4

UM-UV-621-15-Q413V4 www.austin-hughes.com
Basic I/O
AV2.2 upgrade I/O
Power VGA
Audio
Power
out - in - in
Video PC
VGAS-VideoBNC
< 1.1 > Package Content - AP / NAP-15 15" LCD Display
P. 1
< Part 1 >
15" LCD display X 1
6ft VGA cable X 1
Power adapter X 1
Power cord X 1
AP-15 / NAP-15
Mounting hardware X 1 pack
- Mounting bracket x 2 pcs
- M4* 6mm screw x 4 pcs
- M4* 50mm screw x 4 pcs

UM-UV-621-15-Q413V4 www.austin-hughes.com
Rear case
LCD panel
Protective 3mm glass
6mm aluminum front bazel
Audio speaker ( for Audio or TV option )
LCD membrane
Remote sensor
1
2
3
4
5
6
Front view
1
2
3
4
Rear view
6
< 1.2 > Structure Diagram - AP / NAP-15
AP-15
NAP-15
P. 2
5
Model Product Dimension
(W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight
407 x 59.1 x 313.6 mm
16 x 2.3 x 12.3 inch
615 x 113 x 523 mm
24.2 x 4.4 x 20.6 inch
4.7 kg
10.3 lbs
7.3 kg
16.1 lbs
AP-15
NAP-15
7
7

UM-UV-621-15-Q413V4 www.austin-hughes.com
< 1.2 > Dimension - AP / NAP-15
P. 3
Front View Side View
Rear View
15” LCD Display
AP-15
NAP-15
UNIT : mm
1mm = 0.03937 inch
Bottom View

UM-UV-621-15-Q413V4 www.austin-hughes.com
< 1.3 > Panel Mount Installation - AP / NAP-15
1
x 2 pcs
Mounting
bracket
x 4 pcs
M4*6mm screw
2 3
x 4 pcs
M4*50mm screw
Hardware set part no. UV-BK#1
■Install 2 mounting brackets with 4 x M4*6mm screws
■Adjust the LCD panel with 4 x M4*50mm screws and fix it on the surface.
Steps
P. 4

UM-UV-621-15-Q413V4 www.austin-hughes.com
< 1.3 > VESA mount Installation - AP / NAP-15
■Hardware and M4*4 pcs for VESA mount are not provided
VESA mount ( 100*100mm )
M4 screw
15” LCD Display
P. 5

UM-UV-621-15-Q413V4 www.austin-hughes.com
AV2.2 upgrade I/O
Audio
Power
out - in - in
Video PC
VGAS-VideoBNC
Basic I/O
Power VGA
< 2.1 > Package Content - OP-15
P. 6
< Part 2 >
15" LCD display X 1
6ft VGA cable X 1
Power adapter X 1
Power cord X 1
OP-15

UM-UV-621-15-Q413V4 www.austin-hughes.com
Rear case
LCD panel
Audio speaker ( for Audio or TV option )
Universal open frame mounting
LCD membrane
Extended remote sensor membrane cable
( 66cm from AD board to sensor end )
1
2
3
4
5
< 2.2 > Structure Diagram - OP-15
Front view
1
2
Rear view
5
OP-15
4
3
15" LCD Display
P. 7
Model Product Dimension
(W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight
OP-15 404 x 53.1 x 310.6 mm
15.9 x 2.1 x 12.2 inch
615 x 113 x 523 mm
24.2 x 4.4 x 20.6 inch
3.5 kg
7.7 lbs
6.1 kg
13.4 lbs
6
6

UM-UV-621-15-Q413V4 www.austin-hughes.com
P. 8
Front View Side View
Rear View
< 2.2 > Dimension - OP-15
OP-15
UNIT : mm
1mm = 0.03937 inch
Bottom View

UM-UV-621-15-Q413V4 www.austin-hughes.com
M4 screw
Hardware and M4*4 pcs for VESA mounting
are not provided
< 2.3 > Installation - OP-15 15” LCD Display
( I) Universal mount
( II ) VESA mount ( 100*100mm )
P. 9

UM-UV-621-15-Q413V4 www.austin-hughes.com
Regulatory Safety FCC & CE certified
Environmental RoHS2 & REACH compliant
LCD
Panel Manufacturer
Panel Size ( diagonal ) 15-inch TFT color LCD
Display pixel ( dots x lines ) 1024 x 768
Brightness ( typ. ) 250
Contrast Ratio ( typ. ) 700:1
Color 16.2 M
Viewing Angle ( L/R/U/D ) 75/75/75/60
Response Time ( ms ) 8
Dot pitch ( mm ) 0.297
Display Area ( mm ) 304.12H x 228.09V
Surface treatment Haze 25%
Surface hardness 3H
Backlight Type CCFL
MTBF ( hrs ) 30,000
Mechanical
Design AP / NAP-15 OP-15
Front Panel Black, RAL 9005 -
Rear Casing Black, RAL 9005 Black, RAL 9005
VESA Mounting 100 x 100mm 100 x 100mm
Other Mounting Panel mount Universal mount
Protection 3mm protective glass -
Video
Connectivity Analog VGA Analog 0.7Vp-p
Power Power Supply Range Auto-sensing 100 to 240VAC,
50/60Hz
Power Consumption Screen display ON 22W or less
Power saving mode 4W or less
Power button OFF 1W or less
Environmental
Conditions Operating Temperature 0 to 50°C degree
Humidity 20~90%, non-condensing
Storage Temperature -5 to 60°C degree
Humidity 5~90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random
< 3.1 > Product Specifications
P.10
< Part 3 >

UM-UV-621-15-Q413V4 www.austin-hughes.com
Physical
Specification AP / NAP-15 OP-15
Product ( W x D x H ) 407 x 59.1 x 313.6 mm 404 x 53.1 x 310.6 mm
16 x 2.3 x 12.3 inch 15.9 x 2.1 x 12.2 inch
Packing ( W x D x H ) 615 x 113 x 523 mm 615 x 113 x 523 mm
24.2 x 4.4 x 20.6 inch 24.2 x 4.4 x 20.6 inch
Net Weight 4.7 kgs / 10.3 lbs 3.5 kgs / 7.7 lbs
Gross Weight 7.3 kgs / 16.1 lbs 6.1 kgs / 13.4 lbs
Applicable
Format VGA Input PC Signal 1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
15” LCD Display
P. 11

UM-UV-621-15-Q413V4 www.austin-hughes.com
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button for 5 seconds)
Display the OSD menu
Power on / off LCD
Power light
Green = On
Orange = Power saving
Membrane Switch Function
OSD Configuration Page
Image:
for the brightness, contrast, color temp, red, green, and blue
Geometry:
for the auto adjust, H position, V position, phase and clock
Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
for volume, bass, treble, balance, AVL and mute
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer
P.12
< 3.2 > On-screen Display Operation ( OSD )

UM-UV-621-15-Q413V4 www.austin-hughes.com
For TV option , this comes with RC-2 remote controller.
*
Options AP / NAP OP
S-Video + Composite ( BNC )
DVI-D
Audio
Touchscreen
DC Power
TV *
< 4.1 > Option Table
P.13
15” LCD Display
< Part 4 > Options

UM-UV-621-15-Q413V4 www.austin-hughes.com
AV2.2 upgrade option comes with RC-1 remote controller x 1.
***
Audio
Power
out - in - in
Video PC
VGAS-VideoBNC DVI-D
- AV
- DVI-D
- Audio
( DVI-D TMDS single link )
( S-Video + Composite, BNC )
( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )
< 4.2 > AV2.2 Upgrade Options :
P.14

UM-UV-621-15-Q413V4 www.austin-hughes.com
■Dimension will be changed if Multi-touch required
■USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
■For detailed information, please refer to the attached CD disc
■As the touchscreen unit is not made of toughened glass, please handle it carefully
Model TPC-15 Multi-touch TRB e-Resistive TCB e-Capacitive
Technology Projected Capacitive 5-Wire Resistive Capacitive
Touch Point 4 Single Single
Input Type Finger or Capacitive Stylus Finger or Stylus Finger
Resolution 2048 x 2048 2048 x 2048 2048 x 2048
Touch Point Accuracy ± 10 mm offset - -
Response Speed Max. 20 ms 15 ms 20 ms
Activation Force ≤10 g ≤50 g ≤50 g
Surface Hardness 7H 3H 9H
Light Transmission ≥88% 80% ± 3% 92% ± 2%
Haze ≤2% 8% ± 3% 7%
Durability > 100 million touches 10 million touches 300 million touches
Top Layer 1.8 mm Tempered Glass ITO Film Glass
Bottom Layer Film ITO Glass
Thickness 2.2 mm 2.2 ± 0.2 mm 2.8 mm ± 10%
Connector USB Type A USB Type A USB Type A
Compatibility Windows 7 Windows 7 / XP / Vista, Linux
< 4.3 > Options : Touchscreen & driver 15” LCD Display
15" USB Touchscreen Specification
P.15
Power VGA
USB Touchscreen

UM-UV-621-15-Q413V4 www.austin-hughes.com
Model 12V 24V 48V
Input rating
Input voltage: 12-Volt 24-Volt 48-Volt
Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V
Input current
- No load 50 mA 50 mA 50 mA
- Full load 4950 mA 2450 mA 1220 mA
Output rating
Output voltage: 12-Volt 12-Volt 12-Volt
Output current: 4.16A 4.16A 4.16A
Efficiency 84% 85% 85%
< 4.3 > Options : Touchscreen & driver
< 4.4 > Options : DC Power
TRB / TCB Driver
Step 1. Run the bundled CD disc or download the driver from the link below :
http://www.austin-hughes.com/downloads/UVDL/driver.html
Step 2. Double click the Setup.exe
Step 3. Follow the installation instruction to finish the setup
Step 4. After installation, run the TouchKit program & the “4 point calibration”
Please follow the below steps to setup the touch screen:-
Please do the initial calibration
after the first setup
P.16
Connect the USB cable from the USB port on the LCD to a computer. The touch screen supports
easy Plug-and-Play operations. There is no need to install additional drivers on the computer.
TPC-15 Driver