Umi Umi UU-TG5II User manual

UU-TG5II UW Housing
Instruction Manual
Thank you for choosing Umi Umi UU-TG5II UW housing.
Please read this instruction carefully before use for your
understandings of a proper handling.
We assume no responsibility whatever for any damage
on housing, camera or accessories resulting from
user's negligence.
We assume no responsibility for incidental dameges
arising out of product defects, such as shooting expenses,
any relevant expenses or opportunity loss etc.
Warranty
The warranty card has been attached. Make sure everything is correctly
stated such as the date of purchase or shop's name. Read warranty terms
and conditions carefully and keep it in safe custody.
Repair
The warranty covers repair service in accordance with warranty terms
and conditions. To obtain warranty service, you may contact the nearest
authorized dealers.
※Attention: At the request of customer we assume paid repair
service when the product is repairable. You may obtain service at
your dealer or the nearest authorized dealers.
Contact
Contact your dealer or the nearest authorized dealers when you have any
questions about after service.
Compatible Camera: Olympus Tough TG-5
Material: ABS resin
Dimensions: (W) 165mm × (H) 119mm × (D) 99mm
Weight: Approx 690g
Depth Rating: 6 0 m（ 1 9 7 f t ）
1. Remove the lens-ring from the
camera body.
(For the removal method,
please refer to the camera's
instruction manual)
※If you omit this step, the
housing will not be closed.
5. Clean the flat part of the
outside of the O-ring groove
(about 5mm).
2. Please open the three locks
from the back of the housing.
Start with the top lock and
then open the left and right
respectively.
6. Apply proper amount of
silicone grease to your fingers,
and then apply evenly to the
O-ring.
3. Use the attached O-ring
removal to remove the O-ring,
and then place the O-ring in a
clean, dust-free place.
7. Install the O-ring into the
housing.
4. Use a swab to clean the
groove where the O-ring is
placed.
8. Make sure that the O-ring
is properly installed in the
housing with no debris or
hair left.
1. Ring flash diffuser
2. Spare o-ring
3. Rubber cap of fiber optic
socket
4. Fiber-optic cable socket part
5. Screw (3 pcs)
6. O-ring remover
7. Silicone grease
8. Hex wrench
Please make sure all of the following items are included in
this package.
Please observe the following precautions.
・ Opening lock knob with a long nail or an artificial nail may cause a
chipping or breaking nail.
・ Do not set up housing in a dusty or sandy environment.
・ Handle housing carefully to prevent any strong impacts by dropping
or crashing.
・ Do not leave or keep housing in a place being exposed to direct
sunlight or high temperature like on the sand, on the deck of a boat or
in the trank of a car, etc.
・ After rinsing housing in fresh water to remove salts, dry with a towel,
do not use any kinds of heating equipment.
・ Do not use the petroleum solvents such as alcohol, benzin and
thinner, or oil/chemicals allied products such as corrosion prevention,
lubricant and glazing agents.
・ Do not leave or keep housing at any place in high humidity or extreme
fluctuations in temperature.
・ Keep the housing out of children's reach.
・ Rinse the housing thoroughly in fresh water after use and keep in
a cool and dry place, away from direct sunlight.
・ Do not keep housing in a place with extreme fluctuations in
temperature, extreme cold, or high humidity.
・ We recommend a complete overhaul of housing per year.
After Service
Switches And Controls
Specifications
Accessories Included
! Precautions For Safe Handling
! Maintenance/ Storage
EN
Umi Umi Inc.
MTK Bld. 6F, 2-9-1 Higashi Ueno, Taito-ku, Tokyo 110-0015, Japan
1
2
345
6
7
8
A. Place The Camera
1. ON/OFF button
2. Zoom lever
3. Control dial
4. Shutter button
5. Upper Lock knob
6. Flash window
7. Mounting rail
8. INFO button
9. Playback button
10. ◀ button
11. MENU/Wi-Fi button
12. Left Lock knob
13. Movie button
14. Mode dial
15. ▲/Exposure compensation
button
16. OK button
17. Right Lock knob
18. ▶/ Flash button
19. ▼/ (Sequential shooting/ Self-
timer/ Earse button
1
7
8
12
9
10
11
5
13
14
15
16
17
18
19
6
2
4
3
➥
2019APR_EN01

Arm & Grip (Optional)System Sample
Housing Accessories (Optional)
B.After-diving Maintenance D. Use External Strobe
C. About The Ring Flash Diffuser
9. Make sure the zoom lever
is straight. Then, place the
camera into the housing
from above.
1. Wash the seawater with clean
water, and dry it with a towel.
1. Screw the provided 3 screws
and optic fiber together and
insert into the accessory.
※Be careful not to overtighten
the screws.
10. After putting the camera
inside, move the zoom lever
of the housing to the right and
left, and check if it is already
linked with the camera's
zoom lever.
2. Carefully unlock the housing.
When opening the case, water
droplets may accumulate
in the vicinity of the O-ring's
groove.
2. As the picture shown on the
right.
1. The ring flash diffuser of the
housing is a bayonet type.
Let the white side of the ring
flash diffuser face the upper
left side and attach it to the
housing, and screw it to the
right side.
11. Close the back cover and
close the three locks in the
opposite sequence. Please
start with the left and right
locks and finally close the
top lock.
3. Wipe it with a paper towel or
cotton swab.
2. It will be locked in this
position.
12. Finish.
4. Wipe the water droplets near
the groove on the back cover.
3. When not using optic fiber,
please use O-ring to close the
position in the figure in order
to prevent the built-in flash
from spilling light.
The effect of the ring flash is only valid when the camera is
under "Microscope Mode".
Please set the mode dial in "Microscope Mode" before using.
With other shooting modes, vignetting may occur or the
built-in flash may not work normally.
Umi Umi Tray & Grip Set II
Pink UU-300102
Blue UU-300105
Gun Metallic UU-300107
Purple UU-300109
Silver UU-300119
Umi Umi Arm 20cm
Black UU-302001
Pink UU-302002
Blue UU-302005
Gun Metallic UU-302007
Purple UU-302009
Silver UU-302019
Umi Umi Clamp
Black UU-301001
Pink UU-301002
Blue UU-301005
Gun Metallic UU-301007
Purple UU-301009
Silver UU-301019
Umi Umi Macro Fisheye Set
UU-300401
UU-LCDMAX01 -
LCD Screen Magnifier
UU-500101
Umi Umi UU-TG5II (Dull Black) [ UU-100401 ] × 1
Umi Umi Tray & Grip Set II (Blue) [ UU-300105 ] × 1
Umi Umi Arm 20cm (Blue) [ UU-302005 ] × 2
Umi Umi Clamp (Blue) [ UU-301005 ] × 4
Strobe (Other Brand) × 2
UU-WIDE400PRO - Fisheye Wide Angle Conversion Lens
UU-500501
Umi Umi Fixed Ball Base S
UU-304001
Umi Umi Fixed Ball Base L
UU-304101
Umi Umi Large Size First Type Housing Lanyard
White UU-31L100 Black UU-31L101 Yellow UU-31L102
Umi Umi Medium Size First Type Housing Lanyard
White UU-31M100 Black UU-31M101 Yellow UU-31M102
Umi Umi Small Size First Type Housing Lanyard
White UU-31S100 Black UU-31S101 Yellow UU-31S102