UniGuard UT06a User manual

SMART OBD TRACKER
The OBDII GPS tracker is designed based on OBDII/GPS/GSM/GPRS,
simply plug to vehicle OBDII Port to realize remote manage vehicle
tracking and diagnostic, and transmit data to server via GPRS.
◆LED STATUS
Light color
Signal
Stable light on
Flashing
Red
GPS signal
GPS located OK
Connecting
Blue
OBD signal
Read OBD normal
Connecting
Green
GSM signal
Read SIM card
Connecting

◆INSTALLATION
Step1 : Insert SIM Card
Step 2: Plug into OBDII port in vehicle, then turn ignition on
Step 3: Use Phone send below SMS to tracker’s SIM card number
Set APN SMS :
Apn123456(space)LocalApn(space)APNname(space)APNpassword
Eg: apn123456 im.br tim tim
◆SMS COMMANDS LIST
Send 100% same SMS to device’phone number
Function description
Check123456
Check IP Port APN
Adminip123456(space)104.243.132.242(space)7018
Set IP PORT
Apn123456(space)LocalApn(space)APNname(space)APNpassword
Set APN
Ver123456
Check version
Smslink123456
Check location
timezone123456+space+(timezone*60)
Time Zone Setting
begin123456
Initialize factory setting
Open case to
insert SIM
card here

◆PARAMETERS
Size
58mm x 48mmx26mm
Interface
OBD Port: Support 16 pin standard OBDII port.
Supported Vehicle Protocols
Support OBDII protocol, Compliant with 90% vehicle after
2008,ISO-9141-2,ISO-14230(KW)KWP2000,ISO-15765,
CANBUS
Working Voltage
9-30V DC
Position
GPS,AGPS,LBS
GPS
GPS chip: UBLOX-7
Reacquisition Sensitivity: ‐160dBm
Position accuracy: 5-10 CEP
Cold Start: 45s
Hot Start : 1s
Data Transmission
TCP/SMS
GSM
Quad band 850/900/1800/1900MHz
Working Temperature
‐20° ~ +70° (Humidity 80%)