Unihopper MAGICBOX H80 User manual

The drawer installation(H80/120)
Holes position of the front panel
Size Min.H
H80
H120
115mm
155mm
B
18mm
21mm
Holes position of the front panel
The drawer installation(H170)
Runner Installation The cutting size of bottom and back panel
LW:Inner cabinet width
NL :Nominal length(270,300,350,400,450,500,550)
(LW-35)+1
0
(NL-10)
+1
0
bottom
panel
(16mm)
H
(LW-38)+1
0
back
panel
1
2
1
2
Size H
H80
H120
63mm
101mm
H170 148mm
550
500
450
400
350
300
270
Standarddrawerboxcomponents Higherdrawerboxcomponents Standarddrawerboxwithmetalbar
Holes position of the front panel
B
type
A
type
The slim drawer box installation instruction
Load capacity of 35kg
Thickness of bottom panel: 16mm
B type:
Any
height
A type:
fixed
height
Note:
this is suggested holes position.
Side panel front edge of cabinet (Nominal length)
The drawer installation(H80 with metal bar)

Drawer installation：
①
②
1
Disassembling the drawer:
2
2
1
①
②
①
②
(1) (2)
Click
③
③
Atype
withrailing
Btype
withrailing
②
③
②
①
⑤
⑥
③
④
①
The diameter of screwdriver bar: 6mm
Steps of disassembling:
1. Press the handle.
2. Pull out the drawer
and finish.
Installation and regulation
of metal
bar
Disassembling metal bar
Regulate
A type
fixed height
B type
with any height
1.The runner isn't stable when sliding? Please check is it any bits of wood or sundries on the runner when assembling it .
2.The runner isn't sliding well? Please check if cutting size of the bottom and back panel is correct; and check if the bottom and cabinet are in the right position; check if both of the runners are in the
same level of front and back,left and right.
3.The drawer shakes? Check if the drawer side is installed correctly. if both of the runners are not paralleled, we have to regulate by the oval holes.
4.The drawer can't be closed well or the distance of soft-closing is too short? Please check if the drawer side is installed correctly, and check if the distance of the runner to cabinet side edge is correct.
5.The drawer is broken during the transportation? During the transportation, please don't put the assembled drawer and cabinet upside down, otherwise it will make the drawer broken.
Click
Click
The drawer regulation :
The diameter of screwdriver bar: 6mm
The diameter of screwdriver bar: 6mm