6
•As soon as the detector finds an edge of a woo-
den stud, the control light "Stud" will come on
along with continuous sound. The light will come
off as well as the sound as soon as the detector
finds the other edge of the wooden stud.
•Because of the high sensitivity of your machine,
repeat the procedure few times to confirm the
exact location of the stud.
•Keep your tools clean. Dirt from tools may enter the inner machine mechanism and cause damages to the
tools or machine.
•Do not use aggressive cleaning solution or paint thinners to clean the machine.
•Clean plastic parts with soft cloth dipped in soapy water.
•Clean and lubricate metal surfaces with a cloth dipped in paraffin oil.
•If you are not using your machine, conserve it with grease and store it in dry place to prevent corrosion.
Detailed description of the use of this device is not included in this manual, because the manufacturer /
distributor assumes that the user is experienced in similar type of work. Also according to the applicable
law, this device is considered as a commonly sold and used tool. If the user is unfamiliar with the use of
this device, we recommend finding out more information about using this device at the Department of
work safety.
When the operational life of your device is over, dispose off it in accordance with valid rules and regulations.
Your product is made of metal and plastic parts that may be recycled when separated.
1. Disassemble all parts.
2. Separate all parts according to the material they are made of (e.g. metals, rubber, plastics, etc.).
Take the separated parts to the recycling facility near you for further processing.
3. Electrical waste (used electrical power tools, electric motors, recharging equipment, electronics,
accumulators, batteries etc.).
Dear customer. In accordance with the valid regional rules and regulations describing the management of
electrical waste, electrical waste is considered dangerous. Disposal of electrical waste must be therefore
handled as dangerous waste in accordance with waste management rules valid in the state you are in.
It is prohibited to mix electrical waste with regular household waste. You may return your used electrical
appliance to a recycling facility near you. More information about electrical and dangerous waste disposal
may be obtained from your local authority or from the Internet.
If the machine breaks down, send it back to the vendor for quick repair.
Please, enclose brief description of the defect. That makes repair easier. If the machine is still covered by
warranty, enclose the warranty card and proof of purchase receipt. After the warranty period expires, we
repair your machine for a special price.
To prevent possible damages during shipping, packed the machine carefully or use the original packaging
material. We are not liable for shipping damages due to incorrect packaging of your machine. If making a claim
at the shipping company the level and method of packaging plays a major role during claim evaluation process.
Note: Pictures and contents in this manual may slightly differ from the actual product or accessories. It is due
to continuous improvement of our products. Such small differences have no effect on the product functionality.
MAINTENANCE
DISPOSAL
CAUTION
pic. 9 pic. 10
3
???
•This device may be used by a qualified person, 18 years or older who has been
trained in work and environmental safety procedures.
•Any person using this equipment must possess a medical certificate
demonstrating his eligibility to operate this equipment.
Symbols used in this manual
Note:
Additional information.
General instructions
•Plastic bags and packaging materials pose danger for small children and animals.
•Make sure you know how to control your tool or machine and that you are familiar with its operating
procedure. Know the hazards that may occur, if not used correctly.
•If other person is using this machine make sure that he knows how to safely operate this equipment and
that he is familiar with hazards and risk that may occur, if not used correctly.
•Pay special attention to safety notes and safety labels on the machine. Do not remove or damage them.
If the warning label becomes unreadable, please contact your vendor.
•Keep your working place clean. Dirty and disorganized workplace may cause accidents.
•Never work in tight spaces or in purely lit rooms. Make sure the floor is solid and stable and that you can
move around easily. Always keep stable posture.
•Keep focusing and use common sense. Do not continue working if you cannot pay attention.
•Maintain your tools clean and in safe working conditions.
•Handles must be kept free of grease and dirt.
•Make sure no children, unauthorized persons or animals have access to your workshop.
•Never put your hands or legs inside the working area.
•Never leave your machine unattended during operation.
•Use only for purposes for which it has been designed.
•Use personal protective gear such as safety goggles, ear protection, respirator, safe working shoes etc.
•Do not overreach, use both hands.
•Never work under the influence of alcohol or other drugs.
•Do not use the machine/tool if you feel dizzy or week.
•Any modifications or improvements to the machine are strictly prohibited. DO NOT USE if you discover
bent part, crack or other damage to your machine.
•Never perform any maintenance during operation.
•If you see any unusual sign or hear any strange sound, switch of the machine immediately.
•Do not forget to remove all wrenches and/or screwdrivers from the machine.
•Before use, make sure all screws are tightened securely.
•Perform maintenance regularly. Before use make sure the machine is in good working conditions and
without any damage.
SAFETY PRECAUTIONS
