UniMeasure PA series User manual

Excitation Voltage: 25 VDC or VAC Max.
Potentiometer Resistance: 1000 ohms ±10%
Note: Any input voltage up to the maximum specified above
may be used. However, for best performance, the input
voltage should be closely regulated to insure a stable and ac-
curate output voltage.
*
*
* 1.56 (39.6 mm) with "DS" option.
* 1.56 (39.6 mm) with "DS" option.
Wiring and Circuit Diagram
4175 SW Research Way, Corvallis, Oregon, 97333
•Tel: [phone] •Fax [phone]
PA Series Installation Guide
Model PA
Ranges to 50" (1250 mm) Ranges to 80" (2000 mm)
Dimensional Information
Range “A”
(in.) (mm.)
2”, 10” 0.66 16.8
3”, 15”, 30” 0.51 12.9
4”, 20”, 40” 0.35 8.8
5”, 25”, 50” 0.19 4.8

RANGE DIMENSION "A"
2”, 10” 1.34 (34.0 mm)
3”, 15”, 30” 1.49 (37.8 mm)
4”, 20”, 40” 1.65 (41.9 mm)
5”, 25”, 50” 1.81 (46.0 mm)
60" 1.96 (49.8 mm)
75" 2.20 (55.9 mm)
80" 2.28 (57.9 mm)
With "DS" dust shield
option, add 0.36" (9.1
mm)
OPTION "CES" SIDE CABLE EXIT
OPTION "CEB" BOTTOM CABLE EXIT
PA, PB, P420, P510, P1010, EP, V, VP SERIES
RANGE
PA, PB, P420, P510, P1010
EP, V SERIES
DIMENSION "A" DIMENSION "B"*
2”, 10” 1.52" (38.6 mm) 1.28" (32.5 mm)
3”, 15”, 30” 1.68" (42.7 mm)** 1.28" (32.5 mm)
4”, 20”, 40” 1.84" (46.7 mm)** 1.28" (32.5 mm)
5”, 25”, 50” 1.97" (50.8mm)** 1.28" (32.5 mm)
60" 2.53" (64.3 mm) 1.78" (45.2 mm)
75" 2.76" (70.2 mm) 1.78" (45.2 mm)
80" 2.84" (72.2 mm) 1.78" (45.2 mm)
* With "DS" (dust shield) option, add 0.36" (9.1 mm) to "B" dimensions above.
** With "HG" (high wire rope tension) option, add 0.375" to dimension shown
for 30", 40" and 50" measurement ranges only.
RANGE
VP SERIES
DIMENSION "A" DIMENSION "B"*
2”, 10” 1.58" (40.1 mm) 1.68" (42.7 mm)
3”, 15”, 30” 1.74 (44.2 mm)** 1.68" (42.7 mm)
4”, 20”, 40” 1.90 (48.3 mm)** 1.68" (42.7 mm)
5”, 25”, 50” 2.03 (52.3 mm)** 1.68" (42.7 mm)
60" 2.59 (65.8 mm) 1.68" (42.7 mm)
75" 2.82 (71.6 mm) 1.68" (42.7 mm)
80" 2.90 (73.7 mm) 1.68" (42.7 mm)
PA, PB, P420, P510, P1010, EP, V SERIES
4175 SW Research Way, Corvallis, Oregon, 97333
•Tel: [phone] •Fax [phone]