Unistellar eVscope Series User manual

Quick Start Guide
eVscope & eQuinox series

QUICK START GUIDE - eVscope et eQuinox
INSTALL
Requirements
- Avoid directly exposing the eVscope/eQuinox to wind.
- Use the eVscope/eQuinox on stable ground.
- Use the eVscope/eQuinox under a clear sky.
- Locate the eVscope/eQuinox away from direct streetlight.
- For better results, avoid a full moon.
Install your eVscope/eQuinox and power it on
A - Loosen the tripod screws at the crown of the tripod.
B - Install your eVscope/eQuinox vertically on the tripod. Tighten the screws at the crown
of the tripod to secure your eVscope/eQuinox. Be careful not to tighten too hard as it may
damage the thread.
C - Start the eVscope/eQuinox by pressing the On button for 2 seconds. The LED is first
purple then red. Remove the cap covers on both the eVscope/eQuinox tube and eyepiece.
Set up the tripod
- Open the legs of the tripod and adjust the height.
- Adjust the legs to put the bubble level within the
black circle.
- Check that the tripod legs are properly secured.
Note: each time you move your eVscope/eQuinox,
we recommend resetting the bubble level.
1.
2
2 sec
ABC
PRESS
ON

CONNECT
2.
Your eVscope/eQuinox
to the Unistellar App
- Download the Unistellar App on the Google® Play Store and the Apple® App Store (on
smartphones or tablets) under the name Unistellar. The App enables you to wirelessly
control your eVscope/eQuinox with WiFi.
- Launch the Unistellar App to access your WiFi settings (or activate your WiFi on your de-
vice). The App will automatically detect your nearby instrument.
The App is not supported on FireOS devices. If you can’t download it on your smartphone,
check the operating system of your device.
3
QUICK START GUIDE - eVscope et eQuinox

FOCUS & TRACK
3.
Get the right focus
- From the principal screen, click on the telescope icon.
- In order to access the control joystick of the eVscope/
eQuinox, then chose the movement option.
- To move the telescope press and drag the dot of the
joystick with your finger to point it in the direction you
want. Enjoy the live view ! You should be able to see
stars through the eyepiece and on your screen.
On your smartphone or tablet screen, adjust the focus of the eVscope/
eQuinox by turning the focus wheel located at the base of the instrument
until the image is clear.
Press the eVscope orientation button and the eVscope/eQuinox will instantly recognize
objects in its field of view.
Choose the first recommended object in the catalog of the App and hit the GoTo button, it
will take you directly to the object.
Once the telescope has reached its target, switch to the Enhanced Vision mode.
If you are using an eVscope, adjust the focus of the eyepiece’s lens. Turn
the control knob located next to the lens until you find the best setting
for your vision.
4
Move
eVscope orientation
QUICK START GUIDE - eVscope et eQuinox
Slow mode
Move

EXPLORE
4.
5.
Observe live
- Visit the Catalog Tab of your app.
- For a first observation, choose from the recommended targets.
- Once you’ve selected a target, push the GoTo button so that your eVscope/eQuinox points
automatically toward this target. This may take up to one minute.
- You can now enjoy a live view of the sky. However, most
targets are hardly visible in this mode.
- If the target is visible, you can center it using the joystick.
- For planets and the Moon, you should manually adjust the
settings (gain/exposure time).
Enhanced Vision
- Turn on Enhanced Vision by pressing the button .
After a few seconds, the amplified view appears. The longer
you stay, the better it gets. Most targets are clearly visible
within the first minute.
- You can improve the quality of your observation by adjusting
the Enhanced Vision settings (located in the top-right settings
menu), then wait a few seconds for the modifications to appear
in the eyepiece.
OBSERVE & ENHANCE
- You may adjust the zoom on your smartphone screen, the
same zoom is applied in the eyepiece if applicable.
5
QUICK START GUIDE - eVscope et eQuinox
Exposure time
Move
Enhanced vision

PARK
6.
After each observation, use the Park function
of your eVscope/eQuinox, accessible from the
«parameters/my eVscope» menu. This will
automatically move it to the zenith position and
turn it off.
Replace your telescope cover and eyepiece
cover before storing your eVscope/eQuinox in its
backpack or in the original shipping box.
IMPROVE YOUR FUTURE OBSERVATIONS
This is just the beginning of your Unistellar adventure. Here are some tips that will continuously
improve your observing experiences:
- Set your observing conditions in the Explore settings.
- Use the Live settings (gain/exposure time).
- Use the Enhanced Vision settings (contrast/brightness).
- Check and adjust the mirror alignment.
- Adjust the eyepiece’s diopter.
- Enjoy the multi-user experience by allowing your friends to connect to your eVscope/eQuinox.
- Share your observations with the community by sending us your data.
- Contribute to science by joining eVscope/eQuinox observing campaigns.
Check our user guide to learn more about the best practices for your observations including
thermalization, focus adjustment, dark frames and collimation as well as the powerfull
technology behind the eVscope/eQuinox.
Check out our Help Center for storage tips : help.unistellar.com
Questions ? Comments ? Suggestions ?
Please send us an email at [e-mail]
V2.2w
6
QUICK START GUIDE - eVscope et eQuinox