Unit UTG2025A User manual

P/N: 110401104725X
MAY.2018 REV. 4

UTG2000A user manual
Symbols on the product
Chapter 1 Safety Information Following symbols may show on the product:
Safety Terms and Symbols Alternating Current
Terms in the manual Measuring Ground Terminal
Following terms may appear in this manual: Chassis Ground
Warning: a Warning specifies conditions and On/Off Button
actions that may pose hazards to the user. Risk of Electric Shock
Caution: a Caution identifies conditions and Caution, refer to the manual
actions that may cause damage to the product Protective Conductor Terminal
or other properties. CE is a registered trademark of European
Terms on the product Community.
Following terms may show on the product: CSA is a registered trademark of CSA
DANGER indicates any injury hazard immediately International.
accessible as you read the marking.C-tick is a registered trademark of Spectrum
WARNING indicates any injury hazard not Management Agency of Australia. It states
immediately accessible as you read the marking.the compliance with Australian EMC
CAUTION indicates any damage may happen to Framework regulations under the terms of
the product or other properties Audio Communication Act of 1992.
1

2

3

6
12.Arrow
Buttons

10
9.Master Power
Switch
10. AC Power
Receptacle
4.USB Connector
1.External Analog
Modulation Input
2. External Digital
Modulation or
Counter Connector
Figure 2-2

12