SELECT LOCATION
Rememberto selectalocationthat is
readilyaccessibleforperiodicinspection
andcleaning.Allowaminimumof26”in
nt of the access panel for filter re-
%bval. For complete dimensions re-
quired,referto Figure4.
DIRECTIONOFAIR FLOWTHROUGH
THE AIR CLEANER
NOTE:Theaircleanerissetupforleftto
rightair flow, when facingthe access
door.Forrighttoleftairflowremovefilter
cartridge,turnit aroundand replacein
cabinet.The directionalarrowson the
filtercartridgemustpointinthedirection
ofairflow.
INSTALfJITION
MECHANICAL
The air cleanercan be in any position,
exceptwiththeaccessdoorfacingdown,
Figures7-12 show proper air cleaner
mountingwithavarietyoffurnaceinstal-
lations.
prito installingthisproduct...
~Readrulesandinstructionscarefully
forsafeoperation.Failuretofollow
themcoulddamagethe productor
causeahazardouscondition
2. Checktheratingsgivenontheprod-
ucttomakesureitissuitableforyour
application,
SELECT LOCATION
3. Removetheoldfurnacefilterand
discard.
4. Theaircleanercannotremoveexist-
ingdirtfromtheblowerandducts.
5.
Cleantheareathoroughlybefore
youbegin.
Removeunitaccesspaneland me-
diafilterfromthecabinet.Placethem
safelyasidewiththewarrantyregis-
trationcard.
NOTE:Thefollowingisatypicalinstalla-
tion of the air cleaner on ahighboy
furnace(Fig.6). You may haveto alter
theinstallationtofityourapplication.
6.
7.
Locatethecabinetinthecoldair
returnductsothatallofthereturnair
flowsthroughthe unit(Fig.3). Ifthe
furnaceandaircleaneropeningsare
different,useatransition.Referto
Page2, Figure2.
Mountingholesareprovidedforduct
workattachment.(Fig,6).The .140”
holesaresizedfor#8 sheetmetal
screws,or1/8”rivets.Iftheadjoining
ductworkisflanged,installthescrews
sothatthe screwheadsare inside
thecabinet.This willpreventdam-
agetothefilterduringremovaland
installation.
Fi6
8. Aftertheunithasbeensecured,seal
seamsairtightwithducttape or
caulking.
9. Reinstallcabinetfrontpaneldoor
assembly.