INTRODUCTION
2
Thank you for purchasing the US Stove Pellet Burning Stove, you are now prepared to burn wood in the most efcient,
convenient way possible. To achieve the safest, most efcient and most enjoyable performance from your stove, you must
do three things: 1) Install it properly; 2) Operate it correctly; and 3) Maintain it regularly. The purpose of this manual is to
help you do all three.
PLEASEreadthisentiremanualbeforeinstallationanduseofthispelletfuel-burningroomheater.Failuretofollow
theseinstructionscouldresultinpropertydamage,bodilyinjuryorevendeath.
Keepthismanualhandyforfuturereference.
This stove has been independently tested to ASTM E1509-04 Standard Specication for Room Heaters, Pellet Fuel Burn-
ing Type 1, ULC/ORD 1482-90 Standard for Solid Fuel Room Heaters, and Oregon Administrative Rules for Mobile Homes
(814-23-900 through 814-23-909) and Installation as a Stove Heater.
This pellet stove, when installed, must be electrically grounded in accordance with local codes, or in the absence of local
codes, with the National Electrical Code, ANSI/NFPA 70.
Theauthorityhavingjurisdiction(suchasmunicipalbuildingdepartment,redepartment,repreventionbureau,
etc.)shouldbeconsultedbeforeinstallationtodeterminetheneedtoobtainapermit.
This appliance is designed specically for use only with pelletized wood. It is designed for residential installation according
to current national and local building codes as a freestanding room heater. It is also approved as a mobile home heater
which is designed for connection to an outside combustion air source.
The stove will not operate using natural draft or without a power source for the blower systems and fuel feed system and
must not be burned with any type of coal (see PROPERFUEL).
This stove is designed to provide the optimum proportions of fuel and air to the re in order to burn free of smoke and soot.
Any blockage of the air supply to or from the stove will seriously degrade its performance and will be evidenced by a smok-
ing exhaust and a sooting window. For best operation the ash content of the pellet fuel should be less than 1% and the
caloric value approximately 8200 BTU/LB. Avoid high ash content fuels because this will rapidly ll up the burn pot and
eventually cut off the combustion air supply.
Commercial and industrial installations of these pellet stoves should not be used since operational control is often not well
managed in these settings.
IMPORTANTINFORMATION
Model: __5040 ______
Style: ____________________________
Serial Number:_____________________
Purchase Date: ____________________
Purchased From:___________________
___________________
___________________
MAILYOURWARRANTYCARDTODAY
To receive full warranty coverage, you will need
to show evidence of the date you purchased
your stove. We suggest that you attach your
sales invoice to this page, and ll in the form
on the left, so that you will have all the informa-
tion you need in one place should the need for
service or information occur.
