UNITED VC1150 User manual

By AMIRIDIS – SAVVIDIS S.A.

IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING
WARNING: To reduce the risk of fire, electrical shock or injury:
• Do not leave the appliance unattended when plugged in. Unplug it from the outlet when not
in use and before servicing.
• Indoor use only. Do not use on wet surfaces.
• Do not store it outdoors or on wet surfaces. To prevent tripping accidents, store the vacuum
cleaner after each use.
• Use only as described in this manual.
• Do not operate any appliance with a damaged cord or plug or when the appliance
malfunctions, has been left outdoors, dropped into water or damaged in any manner. Return
the appliance to an authorized service facility.
• Do not pull or carry it by the cord, do not use the cord as a handle, do not close a door on
cord or pull the cord around sharp edges or corners, do not pass the appliance over the
cord. Keep the cord away from heated surfaces.
• Do not unplug the device by pulling the cord. To unplug it, grasp the plug, not the cord.
• Do not handle the plug or the appliance with wet hands.
• Do not insert any objects into unit openings. Do not use the appliance with any openings
blocked; keep them free of dust, lint, hair, and anything that may reduce the air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving
parts.
• Use extra caution when cleaning on stairs.
• Keep work areas well lit.
• Do not vacuum any electrical appliances while they are plugged in.
• Do not use this product to pick up sharp objects, metallic debris or large, solid objects (i.e.,
rocks or pebbles), as product damage may result.
• Do not use it to pick up any liquids, toxic substances, flammable or combustible liquids
such as gasoline or use in areas where such may be present.
• Do not place or drop the product into water or other liquids, if the product falls into water,
unplug it immediately from the electrical outlet. Do not touch it or reach into the water.
• Do not use this product while standing in water or on wet surfaces.
• Do not vacuum burning or smoking materials, such as lit cigarette butts, matches or hot
ashes.
• Do not use the unit on or near hot surfaces. Keep the cord away from heated surfaces.
• Do not use the unit without the dirt bowl and filters in place.
• Turn off the switch before unplugging.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
a similarly qualified person in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or metal capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
SAVE THESE INSTRUCTIONS
Getting to know your Cyclonic Vacuum Cleaner
Design Features
◆Power cord wrapped benefit for storage;
◆With different accessories to meet different requirement;
◆Multi-stage filter system;
◆Special crevice brush design, makes it easy to clean the area under sofas and beds;
◆Stick and portable dual usage;
◆Cyclonic design, cloth filter not easily clogged;
◆Transparent dust bowl, easy to observe the litter state;
Important!
Read the safety instructions and the operating instructions through carefully before starting
to use your vacuum cleaner. This is the only way to ensure the safe and reliable use from the
device. If there is a change of owner or user do not forget to hand on the operating
instructions. You will also need these operating instructions for ordering spare parts and
accessories. Please keep this booklet in a safe place.

COMPONENTS AND EQUIPMENT

OPERATION
NOTE:
1. The motor of the appliance is equipped with a thermal safeguard. This device
automatically switches the appliance off in case of overheating. If this occurs, proceed as
follows:
a) Switch the appliance off and remove the plug from the wall socket.
b) Allow the unit to cool. When the unit has cooled down, check and clean the filters.
c) Re-insert the plug in the wall socket and switch the appliance on.
2.The accessories provided can be used in various combinations, depending on the task, as
follows: stick mode and portable mode.
Important!
Do not suck up toner, plaster, cement, stone dust or drill dust. The sucking up of these
materials blocks the filter. After vacuum cleaning switch off the device when you have
finished cleaning
.
Stick mode
WARNING:
Before assembling or disassembling the
accessories always ensure that the device has
been unplugged from the mains socket!
Make sure that the appliance is switched off and
unplugged.
Assembly the accessories
1. Assembly the stick
The attachment of the stick can increase the working area. With this, you can reach corners
and inconvenient places.
Insert the stick to the hole at the back of unit. The click of ball at the side of unit, means that
the stick has been put correctly.

2. Disassembly
Push slightly the ball at the side of unit, pull out the stick at the same time to disassembly the
stick from the unit.
3. Assembly Floor brush
You will probably work most frequently with the floor brush. This is suitable for cleaning wide
areas. The floor brush ensures that you can reach easily into any corner. Suitable for
everyday cleaning of carpets and wooden floors.
Fix the floor brush to the dust bowl，then you can start operating the unit.
Portable mode
Remove the floor brush and stick, insert the other accessory that can be used with the
portable unit.
The crevice tool is suitable for sucking clean the folds in cloth, joint cracks and corners or
niches that can not be reached with the floor brush.

You can use the brush tool to clean the dust from books or sensitive objects such as picture
frames etc.
The brush tool is suitable for the careful cleaning of upholstered furniture, mattresses,
cushions, curtains etc.
Storage the power cord
Power cord can be re-winded round the two hooks at the unit and stick
when power off of unit. That will be easy and convenient next time you
use the vacuum cleaner.
CLEANING THE FILTER
Caution!
Wash the filter with warm, soapy water. The dust bowl can also be washed if necessary. Do
not immerse the appliance in water.
You can easily see through the transparent dust bowl when it must be emptied.
1.Push the release button, separate the bowl and clamshell, remove the dust bag and empty
the dust from the dust cup.

2. The dust bag and the pre- filter should be cleaned regularly. Cleaning is best done when
emptying the dust bowl. Hold the dust bag, turn the pre-filter counter-clockwise to separate
the pre-filter.
3. Wash the dust bag with clean water, dry it naturally. Do not dry it by heat or it will distort.
CARE AND MAINTENANCE
Danger!
Never expose the vacuum cleaner to the weather conditions (rain, etc.).
The casing, dust collecting chamber and filter chambers of the vacuum cleaner can be wiped
with a damp cloth if required. No liquid must enter the vacuum cleaner during the process.
Never use strong cleaning substance (scouring liquids, thinners), since these will corrode the
plastic surface.
Hair and fluff may gather on the running wheels and on the floor nozzle of the vacuum
cleaner in time.
You should remove these to ensure that handling of the vacuum cleaner is always easy.
Danger!
Never try to repair a defective device, or a device you believe to be defective, by
yourself. You can put both yourself and future users in danger. Repairs may only be
carried out by authorized specialists.

Your product is designed and manufactured with high quality materials and components which can
be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed
of separately from your household waste. Please dispose of this equipment at your local community
waste collection/ recycling centre.
In the European Union there are separate collection systems for used electrical and electronic products. Please help
us to conserve the environment we live in!
DECLARATION OF CONFORMITY
This product complies with the requirements of the directives
EMC-Directive: 2004 / 108 / EEC
Low Voltage Directive: 2006/95/EC
EcoDesign ErP Directive: 2009/278/EC
declaring that model VC-1150
is in compliance with the following norms:
EN 55014-1 :2000+A1+A2
EN 55014-2 :1997/+A1 :2001
EN 61000-3-2 :2000+A2
EN 61000-3-3 :1995/+A1 :2001/+A2 :2005
EN 60335-1 :2002+A1+A11+A12
EN 60335-2-2 :2003+A1
EN 50366 :2003+A1
EN 62301:2005
EXCLUSIVE IMPORTER IN GREECE:
Amiridis – Savvidis S.A.
33, Vas. Olgas avenue
P.O. 54641, Thessaloniki, Greece
Tel: [phone], Fax: [phone]
45, Posidonos street
P.O. 18344, Moschato, Athens, Greece
Tel: [phone], Fax: [phone]
www.amiridis-savvidis.gr