Unitedlink UniBox-3240 User manual

1
UniBox-324X Series
Intel Atom D2550 Processor, Fanless, Industrial Compact Size PC
User Manual
Release Date Revision
Oct. 2015 V1.0

2
Revision History
Reversion
Date
Description
1.0
2015/07/09
Official Version

3
Table of Contents
Chapter 1 Getting Started ......................... 5
1.1 Features...........................................................................................5
1.2 Specifications...................................................................................5
1.2 Dimensions ......................................................................................7
1.3 Brief Description of UniBox-324x Series...........................................9
Chapter 2 Hardware ........................ 10
2.1 Motherboard Introduction.............................................................10
2.2 Motherboard Specifications...........................................................10
2.3 Jumpers Setting and Connectors....................................................11
2.4 Difinition of Jumpers and Connectors............................................12
Chapter 3 BIOS Setup ...................... 36
3.1 Operations after POST Screen........................................................36
3.2 BIOS Setup Utility...........................................................................36
3.3 Main Settings.................................................................................37
3.4 Advanced Settings .........................................................................38
3.5 Chipset Settings .............................................................................44
3.6 Security Settings ............................................................................45
3.7 Boot Settings..................................................................................47
3.8 Save & Exit Settings .......................................................................48
Chapter 4 Installation of Drivers....................... 50
4.1 Intel(R) AtomTM SoC Chipset.........................................................51
4.2 Intel(R) VGA Chipset ......................................................................54
4.3 Intel(R) LAN Driver .........................................................................58
4.4 Realtek ALC662 HD Audio Driver Installation .................................61
4.5 USB 3.0 Driver................................................................................63

4
Table of Figures
Chapter 1 Getting Started ......................... 5
Figure 1.1 : Dimensions of UniBox-324x.....................................................7
Figure 1.2 : Dimensions of UniBox-324x with Din Rail................................8
Figure 1.3 : Over View of UniBox-324x SERIES ...........................................9
Figure 1.4 : IO View of UniBox-324x SERIES ...............................................9
Chapter 2 Hardware ........................ 10
Figure 2.1 : Mainboard Dimensions .........................................................10
Figure 2.2 : Jumpers and Connectors Location_ Board Top......................11
Figure 2.3 : Jumpers and Connectors Location_ Board Bottom................11

5
Chapter 1 Getting Started
1.1 Features
Intel Celeron N2930 (1.83GHz) Processor
Fanless Design with wide temperature support (-20~60°C)
Onboard 2GB DDR III 800 MHz, 4GB for option
Wide Range 9~36V DC Power Input
Ultra Slim Size, Thickness: 3.39 cm
x 2.5” SATAII HDD space, Easy Accessible
1.2 Specifications
UniBox-3240
System
CPU
Intel Celeron N2930 1.83GHz Processor
System Chipset
SoC
System Memory
Onboard 2GB DDR3-800, (4GB Option)
IO Port
Display
1 x VGA DB15
1 x HDMI
LAN
2 x GbE RJ-45
USB
3 x USB 2.0 type A
1 x USB 3.0 type A
Serial/
1 x RS-232/422/485 DB-9, COM1, Default RS-232
1 x RS-232 DB-9, COM2
Audio
1 x Line Out via 3.5mm Phone-Jack
Power
1 x 3pins terminal block for DC Power input
1 x 2pins connector for power on/off button
Storage Space
HDD
1 x 2.5” SATA HDD bay (Easy Accessible)
SD Card
1 x SD card slot, up to 32GB
Expansion
Expansion Slot
1 x Internal Mini-PCIe slot, Full Size
Power
Power Input
9~36V DC
Consumption
12W (Max.)
Mechanical
Construction
Sliver aluminum chassis
Color
RAL 9007

6
Mounting
Wall, VESA 100 x 100, Din Rail
Dimension (mm)
297 x 173 x 33.9
Net Weight (Kgs)
1.6Kg
Environmental
Operating Temperature
-20~60°C
Storage temperature
-40~85°C
Storage humidity
10 to 90% @ 40°C, non- condensing
Certification
CE / FCC Class A
Operating System
Support
Windows Embedded 8.1 Industry Pro,
Windows 7 Pro for Embedded,
Windows Embedded standard 7

7
1.2 Dimensions
Figure 1.1 : Dimensions of UniBox-324x

8
Figure 1.2 : Dimensions of UniBox-324x with Din Rail

9
1.3 Brief Description of UniBox-324x Series
The UniBox-324x system is a Fan-less Box PC with High-efficiency Thermal
Solution, powered by Intel Celeron N2930 1.83GHz Processor and on board 2GB
DDR3-800 Memory, up to 4GB as option. It comes with 3 x USB 2.0 type A ports, 1 x
USB 3.0 type A, 2 x COM Ports, 1 x Audio jack, 2 x GbE Lan, 1 x internal Full size
Mini-PCIe slot, and 9~36V wide-ranging power input. It is ultra slim size designed and
with wide temperature support from -20°Cto 60°C. It is ideal for Industrial Automation,
Factory Automation, Machine Vision, Process Control, Data Terminal, Surveillance,
and etc. It suitable to running factory operations from small visual interface and
maintenance applications to large control process applications. The UniBox-324x
works very well along with any of our Display series and it absolutely can provide an
easy way to perform control and field maintenance.
Figure 1.3 : Over View of UniBox-324x SERIES
Figure 1.4 : IO View of UniBox-324x SERIES

10
Chapter 2 Hardware
2.1 Motherboard Introduction
SBC-7111 is a 4" industrial motherboard developed on the platform of Intel Bay
trail-I/M Processors, which provides abundant peripheral interfaces to meet the
needs of different applications. Also, it features dual GbE ports, 3 x COM ports and
one Mini PCIE configuration, one VGA port, one HDMI port, one LVDS interface. To
satisfy the special needs of high-end customers, CN1 and CN2 and CN3 richer
extension functions. The product is widely used in various sectors of industrial
control.
2.2 Motherboard Specifications
Figure 2.1 : Mainboard Dimensions

11
2.3 Jumpers Setting and Connectors
Figure 2.2 : Jumpers and Connectors Location_ Board Top
Figure 2.3 : Jumpers and Connectors Location_ Board Bottom

12
2.4 Difinition of Jumpers and Connectors
2.4.1 U2:
(FCBGA1170), onboard Intel Bay trail-I/M Processors.
Model
Processor
Number
PBF
Cores/Threads
TDP
Remarks
SBC-7111-E3845-2G
E3845
1.91GHz
4 / 4
10W
SBC-7111-E3845-4G
E3845
1.91GHz
4 / 4
10W
Option
SBC-7111-N2930-2G
N2930
1.83 up to
2.16GHz
4 / 4
4.5 /
7.5W
Option
SBC-7111-N2930-4G
N2930
1.83 up to
2.16GHz
4 / 4
4.5 /
7.5W
Option
SBC-7111-E3815-2G
E3815
1.46GHz
1 / 1
5W
Option
2.4.2 H3/H4/H5/H6(option):
U2 Heat Sink Screw holes, four screw holes for intel Bay trail-I/M Processors Heat
Sink assemble.
2.4.3 U3/U4/U5/U6:
(FBGA96)Onboard DDR3L Memory.
Model
Memory
SBC-7111-E3845-2G
2GB
SBC-7111-N2930-2G
2GB (option)
SBC-7111-E3815-2G
2GB (option)
SBC-7111-E3845-4G
4GB (option)
SBC-7111-N2930-4G
4GB (option)
2.4.4 S-422 (PIN6):
(Switch),ATX Power and Auto Power on jumper setting.
S-422(Switch)
Mode
Pin6 (Off)
ATX Power
Pin6 (On)
Auto Power on (Default)
2.4.5 BAT1 :
(1.25mm Pitch 1x2 Wafer Pin Header) 3.0V Li battery is embedded to provide
power for CMOS.
Pin#
Signal Name
1
VBAT
2
Ground
2.4.6 SW1（NC）:
(2.0mm Pitch 2x2 Pin Header),Reserve.
2.4.7 BAT2（NC）:
(2.0mm Pitch 1x8 Wafer Pin Header),Reserve.

13
2.4.8 LED3/LED4（NC）:
LED3:Reserve.
LED4:Reserve.
2.4.9 DC_IN1:
(5.08mm Pitch 1x3 Pin Connector),DC9V~36V System power input connector.
Pin#
Power input
1
DC+9V~36V
2
Ground
3
FG
Model
DC_IN1
SBC-7111-E3845-2G
180°Connector
SBC-7111-E3845-4G
180°Connector
SBC-7111-N2930-2G
180°Connector
SBC-7111-N2930-4G
180°Connector
SBC-7111-E3815-2G
180°Connector
SBC-7111-E3845P-2G
45°Connector
SBC-7111-E3845P-4G
45°Connector
2.4.10 BT1/BT2:
Power on/off button, They are used to connect power switch button. The two
pins are disconnected under normal condition. You may short them temporarily
to realize system startup & shutdown or awaken the system from sleep state.
2.4.11 FAN1(option):
(2.54mm Pitch 1x3 Pin Header),Fan connector, cooling fans can be connected
directly for use. You may set the rotation condition of cooling fan in menu of
BIOS CMOS Setup.
Pin#
Signal Name
1
Ground
2
VCC
3
Rotation detection
Note:
Output power of cooling fan must be limited under 5W.

14
2.4.12 VGA_PH1:
(CRT 2.0mm Pitch 2x6 Pin Header), Video Graphic Array Port, Provide 2x6Pin
cable to VGA Port.
Signal Name
Pin#
Pin#
Signal Name
CRT_RED
1
2
Ground
CRT_GREEN
3
4
Ground
CRT_BLUE
5
6
VGA_EN
CRT_H_SYNC
7
8
CRT_DDCDATA
CRT_V_SYNC
9
10
CRT_DDCCLK
Ground
11
12
Ground
VGA hot plug setting for Windows XP:
VGA1 (Pin Header)
Function
Pin4-Pin6 (Close)
VGA Simulation Disabled
Pin4-Pin6 (Open)
VGA Simulation Enabled
Use the 2.0mm jumper cap to close pin4 and pin6
2.4.13 HDMI1:
(HDMI 19P Connector), High Definition Multimedia Interface connector.
2.4.14 JP6:
(2.0mm Pitch 2x2 Pin Header), LVDS jumper setting.
JP6
Function (CN1)
Pin1-Pin2 (Close)
Single channel LVDS
Pin1-Pin2 (Open)
Dual channel LVDS (Default)
Pin3-Pin4 (Close)
8/24 bit (Default)
Pin3-Pin4 (Open)
6/18 bit
2.4.15 U18:
AT24C02-DIP8,The EEPROM IC（U18）is the set of LVDS resolution. If you need
other resolution settings, please upgrade U18 data.
Model
LVDS resolution
SBC-7111-E3845-2G
SBC-7111-E3845-4G
SBC-7111-N2930-2G
SBC-7111-E3845-4G
SBC-7111-E3815-2G
1280*1024 (Default)
800*480 (option)
800*600 (option)
1024*768 (option)
1920*1080 (option)
……

15
2.4.16 INVT1:
(2.0mm Pitch 1x6 wafer Pin Header), Backlight control connector for LVDS.
Pin#
Signal Name
1
+DC12V
2
+DC12V
3
Ground
4
Ground
5
BKLT_EN_OUT
6
BKLT_CTRL
2.4.17 CN1:
(1.25mm Pitch 2x20 Connector, DF13-40P), for 18/24-bit LVDS output connector,
fully supported by Parad PS8625(DP to LVDS), the interface features dual channel
24-bit output. Low Voltage Differential Signaling, A high speed, low power data
transmission standard used for display connections to LCD panels.
Function
Signal Name
Pin#
Pin#
Signal Name
Function
LVDS
12V_S0
2
1
12V_S0
LVDS
BKLT_EN_OUT
4
3
BKLT_CTRL
Ground
6
5
Ground
LVDS_VDD5
8
7
LVDS_VDD5
LVDS_VDD3
10
9
LVDS_VDD3
Ground
12
11
Ground
LA_D0_P
14
13
LA_D0_N
LA_D1_P
16
15
LA_D1_N
LA_D2_P
18
17
LA_D2_N
LA_D3_P
20
19
LA_D3_N
LA_CLKP
22
21
LA_CLKN
LB_D0_P
24
23
LB_D0_N
LB_D1_P
26
25
LB_D1_N
LB_D2_P
28
27
LB_D2_N
LB_D3_P
30
29
LB_D3_N
LB_CLKP
32
31
LB_CLKN
Ground
34
33
Ground
USB3
(JP4 open)
USB3
(JP4 open)
USB3_P
36
35
USB3_N
5V_S5_USB
38
37
5V_S5_USB
Power LED
PWR_LED+
40
39
Ground
Power LED

16
2.4.18 JP4:
(2.0mm Pitch 2x2 wafer Pin Header), USB3(CN1) or Touch jumper setting.
JP4
Function
USB3 (CN1)
Touch (TCH1)
Close 3-4 (default)
-
Yes
Open 3-4 (option)
Yes
-
Open 1-2 (default)
-
2.4.19 TCH1:
(2.0mm Pitch 1x6 wafer Pin Header), internal Touch controller connector.
Pin#
Signal Name
1
SENSE
2
X+
3
X-
4
Y+
5
Y-
6
GND_EARCH
2.4.20 JP1:
(2.0mm Pitch 2x3 Pin Header), COM1 jumper setting, pin 1~6 are used to select
signal out of pin 9 of COM1 port.
JP1 Pin#
Function
Close 1-2
COM1 RI (Ring Indicator) (default)
Close 3-4
COM1 Pin9: DC+5V (option)
Close 5-6
COM1 Pin9: DC+12V (option)
2.4.21 S_232:
(Switch), COM1 jumper setting, it provides selectable RS232 or RS422 or RS485
serial signal output.
Function
S_232 Pin#
RS232 (Default)
ON: Pin1, Pin2, Pin3, Pin4
RS422 (option)
OFF: Pin1, Pin2, Pin3, Pin4
RS485 (option)
OFF: Pin1, Pin2, Pin3, Pin4
2.4.22 S_422:
(Switch), COM1 setting, it provides selectable RS232 or RS422 or RS485 serial
signal output.
Function
S_422 Pin#
RS232 (Default)
OFF: Pin1, Pin2, Pin3, Pin4, Pin5
RS422 (option)
ON: Pin1, Pin2, Pin3, Pin4, Pin5
RS485 (option)
ON: Pin1, Pin2, Pin3, Pin4, Pin5
S-422
Mode
Pin6 (Off)
ATX Power
Pin6 (On)
Auto Power on (Default)

17
2.4.23 COM1:
(Type DB9M), Rear serial port, standard DB9 Male serial port is provided to
make a direct connection to serial devices. COM1 port is controlled by pins
No.1~6 of JP1, select output Signal RI or 5V or 12V, for details, please refer to
description of JP1 and S_232 and S_422 setting.
RS232 (Default)
Pin#
Signal Name
1
DCD# (Data Carrier Detect)
2
RXD (Received Data)
3
TXD (Transmit Data)
4
DTR (Data Terminal Ready)
5
Ground
6
DSR (Data Set Ready)
7
RTS (Request To Send)
8
CTS (Clear To Send)
9
JP1 select Setting (RI/5V/12V)
BIOS Setup:
Advanced/F81216SEC Super IO Configuration/Serial Port 1 Configuration 【RS-232】
RS422 (option)
Pin#
Signal Name
1
422_RX+
2
422_RX-
3
422_TX-
4
422_TX+
5
Ground
6
NC
7
NC
8
NC
9
NC
BIOS Setup:
Advanced/F81216SEC Super IO Configuration/Serial Port 1 Configuration 【RS-422】
RS485 (option)
Pin#
Signal Name
1
NC
2
NC
3
485-
4
485+
5
Ground
6
NC
7
NC
8
NC

18
9
NC
BIOS Setup:
Advanced/F81216SEC Super IO Configuration/Serial Port 1 Configuration 【RS-485】
2.4.24 JP2:
(2.0mm Pitch 2x3 Pin Header), COM2 jumper setting, pin 1~6 are used to select
signal out of pin 9 of COM2 port.
JP2 Pin#
Function
Close 1-2
COM2 RI (Ring Indicator) (default)
Close 3-4
COM2 Pin9: DC+5V (option)
Close 5-6
COM2 Pin9: DC+12V (option)
2.4.25 COM2:
(Type DB9M),Rear serial port, standard DB9 Male serial port is provided to make
a direct connection to serial devices.
Pin#
Signal Name
1
DCD# (Data Carrier Detect)
2
RXD (Received Data)
3
TXD (Transmit Data)
4
DTR (Data Terminal Ready)
5
Ground
6
DSR (Data Set Ready)
7
RTS (Request To Send)
8
CTS (Clear To Send)
9
JP2 select Setting (RI/5V/12V)
2.4.26 LED1,LED2 (option) :
LED1: LED STATUS. Green LED for Motherboard Standby Power Good status.
LED2: LED STATUS. Green LED for Touch Power status.
2.4.27 SATA_P:
(2.5mm Pitch 1x2 box Pin Header), One onboard 5V output connector are
reserved to provide power for SATA devices.
Pin#
Signal Name
1
+DC5V
2
Ground
Note:
Output current of the connector must not be above 1A.
2.4.28 SATA2:
(SATA 7Pin), SATA Connectors, one SATA connector are provided, with transfer
speed up to 3.0Gb/s.

19
2.4.29 SATA1:
(SATA 7Pin+15Pin), SATA Connectors, one SATA connector are provided, with
transfer speed up to 3.0Gb/s.
2.4.30 SD1:
(SD card slot), Secure Digital Memory Card socket.
2.4.31 MPCIE1:
(Socket 52Pin), mini PCIe socket, it is located at the top, it supports mini PCIe
devices with USB2.0 and LPC and SMBUS and PCIe signal. MPCIe card size is
30x50.95mm.
2.4.32 H1/H2:
MPCIE1 SCREW HOLES, H1and H2 for mini PCIE card (30mmx50.95mm)
assemble.
2.4.33 F_AUDIO1:
(2.0mm Pitch 2X6 Pin Header), Front Audio, An onboard Realtek ALC662-VD
codec is used to provide high-quality audio I/O ports. Line Out can be connected
to a headphone or amplifier. Line In is used for the connection of external audio
source via a Line in cable. MIC is the port for microphone input audio.
Signal Name
Pin#
Pin#
Signal Name
+5V
1
2
GND_AUD
LINE-OUT-L
3
4
LINE-OUT-R
FRONT_JD
5
6
LINE1_JD
LINE_IN-L
7
8
LINE-IN-R
MIC-IN-L
9
10
MIC-IN-R
GND-AUD
11
12
MIC1_JD
2.4.34 LINE_OUT1:
(Diameter 3.5mm Jack), HD Audio port, An onboard Realtek ALC662-VD codec is
used to provide high quality audio I/O ports. Line Out can be connected to a
headphone or amplifier.
2.4.35 USBCON1:
USB0/USB1：(Double stack USB type A), Rear USB connector, it provides up to
two USB2.0 port, High-speed USB 2.0 allows data transfers up to 480 Mb/s,
support USB full-speed and low-speed signaling.
Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A.
If the external USB device current exceeds 1.5A, please separate connectors
into different Receptacle.

20
2.4.36 LAN1/LAN2:
LAN1/LAN2: (RJ45 Connector), Rear LAN port, Two standard 10/100/1000M
RJ-45 Ethernet ports are provided. Used intel 82574L chipset, LINK LED (green)
and ACTIVE LED (yellow) respectively located at the left-hand and right-hand
side of the Ethernet port indicate the activity and transmission state of LAN.
2.4.37 BUZ1:
Onboard buzzer.
2.4.38 CN2:
(DF13-30P Connector),For expand output connector, It provides eight GPIO,one
RS422 or RS485,one USB2.0,one Power on/off, one Reset.
Function
Signal Name
Pin#
Pin#
Signal Name
Function
5V
5V_S5
2
1
5V_S5
5V
SOC_GPIO10
GPIO_IN2
4
3
GPIO_IN1
SOC_SPIO09
SOC_GPIO26
GPIO_IN4
6
5
GPIO_IN3
SOC_GPIO17
SOC_GPIO05
GPIO_OUT2
8
7
GPIO_OUT1
SOC_GPIO04
SOC_GPIO08
GPIO_OUT4
10
9
GPIO_OUT3
SOC_GPIO06
Ground
12
11
Ground
485 or 422
485+_422TX+
14
13
485-_422TX-
485 or 422
RS422
422_RX+
16
15
422_RX-
RS422
NC
18
17
NC
NC
20
19
NC
5V
5V_S0
22
21
HDD_LED+
HDD LED
USB2.0
5V_USB01
24
23
5V_USB01
USB2.0
USBDN1_P
26
25
USBDN1_N
Ground
28
27
FP_RST-
RESET
Power auto on
PWRBTN_ON
30
29
Ground
COM5 BIOS Setup：
Advanced/IT8518Super IO Configuration/Serial Port 1 Configuration【RS-422】
Advanced/IT8518Super IO Configuration/Serial Port 1 Configuration【RS-485】
2.4.39 EC_GPIO1:
(2.0mm Pitch 1X10 Pin Header),For expand connector, it provides eight GPIO.
Pin#
Signal Name
1
Ground
2
EC_GPIO1
3
EC_GPIO2
4
EC_GPIO3
5
EC_GPIO4
6
EC_GPIO5
7
EC_GPIO6
8
EC_GPIO7
9
EC_GPIO8
10
3.3V