Unitron 9732MC User manual

User Manual
dCSS/dSCR Multiswitch
9732MC

dCSS/dSCR Multiswitch (Ref. 9732MC) v1.0
2
CONTENTS
1. INSTALLATION OF THE HARDWARE ...................................................... 3
2. CONFIGURATION OF THE MODULE ........................................................ 4
Installation Mode............................................................................................... 4
CSS Mode......................................................................................................... 4
ONLY EN50494/SCR standard.................................................................... 4
ONLY EN50607/dCSS standard .................................................................. 4
CONCURRENT EN50494/EN50607 standards ............................................... 4
3. TECHNICAL SPECIFICATIONS ............................................................. 5
4. SAFETY INSTRUCTIONS .................................................................... 7
5. CONDITIONS OF WARRANTY............................................................... 8
No part of this manual may be copied, reproduced, transmitted, transcribed or translated into any language
without permission.
Unitron reserves the right to change the specifications of the hardware and software described in these manuals
at any time.
Unitron cannot be held liable for any damages resulting from the use of this product. Specifications
are subject to change without notice. 1/17
©Unitron - Frankrijklaan 27 - B-8970 Poperinge - Belgium
T+32 57 33 33 63 F+32 57 33 45 24
email [e-mail]
www.johansson.be - www.unitrongroup.com

dCSS/dSCR Multiswitch (Ref. 9732MC) v1.0
3
1. INSTALLATION OF THE HARDWARE

dCSS/dSCR Multiswitch (Ref. 9732MC) v1.0
4
2. CONFIGURATION OF THE MODULE
Installation Mode
The device starts up in installation mode to check the equipment functionality and the correct
installation. In this mode the automatic gain control is frozen (commands for activating the
AGC are required). The multiswitch switches to SCR/CSS mode upon receiving a DiSEqC
message.
To activate one or more of the UBs a proper DiSEqC message should be received.
The installation mode starts up with the following 2 transponders active (both output signals
are having a fixed gain):
Transponder 58 (Frequency: 11880 Vertical) placed in output IF 1281.
Transponder 101 (Frequency: 12731 Horizontal) placed in output IF 2131.
CSS Mode
ONLY EN50494/SCR standard
For Installation with Legacy STB and PVR SCR compatible:
Max 8 User Bands (UB0 to UB7) available (as in the LNB SCR)
Signalling DiSEqC 1.0
ONLY EN50607/dCSS standard
For NEW Installation of HMG:
16 User Bands for HMG in the range from UB0 to UB15
Signalling DiSEqC 1.0 or 2.0
CONCURRENT EN50494/EN50607 standards
For existing MULTIVISION installations (Legacy STB/PVR SCR compatible), with main STB
upgraded to Next Gen PVR/HMG:
Max 8 User Bands (UB0 to UB7) available for current STB/PVR
16 User Bands for HMG in the range from UB0 to UB15
Signalling DiSEqC 1.0 + signalling DiSEqC 2.0 in the same cable from LNB to apartment

dCSS/dSCR Multiswitch (Ref. 9732MC) v1.0
5
3. TECHNICAL SPECIFICATIONS
9732MC
Trunk inputs
-
4
Trunk outputs
-
4
Frequency (MHz)
-
950 –2150
Trunk loss
-
1 dB
dCSS/dSCR outputs
-
2
dCSS/dSCR output connector
-
75 Ohm F type (Female)
dCSS/dSCR UBs
-
16+16
dCSS/dSCR output level
-
85 dBµV
Return loss
-
>=8 dB (Typ 12 dB)
Tap loss
-
Not applicable, AGC (automatic Gain control)
Band and polarity selection
-
DiSEqC 1.0 (unidirectional)
DiSEqC 2.0 (bidirectional)
Standard EN 50494 (SCD)
Standard EN 50607 (SCD 2)
Max DC current consumption
-
< 320mA @ 13 Volt
Power supply
-
From STB, power inserter or trunk (VL)
Power inserter (2460+9669 available
separately)
-
3A, 20V

dCSS/dSCR Multiswitch (Ref. 9732MC) v1.0
6
UB
index
UB center
frequency (MHz)
UB default BW
(MHz)
Usage
0
1210
40
EN50494
Legacy STB and PVR
SCR compatible
1
1420
40
EN50494
2
1680
40
EN50494
3
2040
40
EN50494
4
1006
40
EN50494
5
1057
40
EN50494
6
1108
40
EN50494
7
1159
40
EN50494
0
1210
40
EN50607
HMG 16 tuners
1
1420
40
EN50607
2
1680
40
EN50607
3
2040
40
EN50607
4
1006
40
EN50607
5
1057
40
EN50607
6
1108
40
EN50607
7
1159
40
EN50607
8
1261
40
EN50607
9
1312
40
EN50607
10
1363
40
EN50607
11
1471
40
EN50607
12
1522
40
EN50607
13
1573
40
EN50607
14
1624
40
EN50607
15
1731
40
EN50607

dCSS/dSCR Multiswitch (Ref. 9732MC) v1.0
7
4. SAFETY INSTRUCTIONS
Read these instructions carefully before connecting the unit
To prevent fire, short circuit or shock hazard:
 Do not expose the unit to rain or moisture.
 Install the unit in a dry location without infiltration or condensation of water.
 Do not expose it to dripping or splashing.
 Do not place objects filled with liquids, such as vases, on the apparatus.
 If any liquid should accidentally fall into the cabinet, disconnect the power plug.
To avoid any risk of overheating:
 Install the unit in a well aery location and keep a minimum distance of 15 cm around the
apparatus for sufficient ventilation
 Do not place any items such as newspapers, table-cloths, curtains,
on the unit that might cover the ventilation holes.
 Do not place any naked flame sources, such as lighted candles, on the apparatus
 Do not install the product in a dusty place
 Use the apparatus only in moderate climates (not in tropical climates)
 Respect the minimum and maximum temperature specifications
To avoid any risk of electrical shocks:
 Connect apparatus only to socket with protective earth connection.
 The mains plug shall remain readily operable
 Pull out power plug to make the different connections of cables
 To avoid electrical shock, do not open the housing of adapter.
Maintenance
Only use a dry soft cloth to clean the cabinet.
Do not use solvent
For repairing and servicing refer to qualified personnel.
Dispose according your local authority’s recycling processes

dCSS/dSCR Multiswitch (Ref. 9732MC) v1.0
8
5. CONDITIONS OF WARRANTY
Unitron N.V. warrants the product as being free from defects in material and
workmanship for a period of 24 months starting from the date of production indicated on
it. See note below.
If during this period of warranty the product proves defective, under normal use, due to
defective materials or workmanship, Unitron N.V, at its sole option, will repair or replace the
product. Return the product to your local dealer for reparation
THE WARRANTY IS APPLIED ONLY FOR DEFECTS IN MATERIAL AND WORKMANSHIP
AND DOES NOT COVER DAMAGE RESULTING FROM:
Misuse or use of the product out of its specifications.
Installation or use in a manner inconsistent with the technical or safety standards in
force in the country where the product is used
Use of non-suitable accessories (power supply, adapters...).
Installation in a defect system.
External cause beyond the control of Unitron N.V. such as drop, accidents,
lightning, water, fire, improper ventilation…
THE WARRANTY IS NOT APPLIED IF
Production date or serial number on the product is illegible, altered, deleted or
removed.
The product has been opened or repaired by a non-authorized person.
NOTE
Date of production is YYWW format, example 1447 = year 2014 –week 47.
For the serial number barcodes, the date corresponds to the 4 first numbers
UNITRON NV
Frankrijklaan 27
B-8970 Poperinge
Belgium
T [phone]
F [phone]
[e-mail]
www.johansson.be