URBAN OUTFITTERS BRADLEY User manual

BRADLEY FLOOR LAMP
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 1 of 2
WARNING:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place overheat or Air conditioning vents.
Blot spills do not rub, with a clean white cloth. Do
not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
PARTS INCLUDED
H) Body
D) Screw
[5/32-32Tx3mm]X3
E) Allen key
B) Lower Metal Shade
C) Socket Ring X2
F) Arms
G) Knob
A) Upper-Metal Shade
K) Nut
[1/4-18 x 15mm] x1
I) Base
J Wrench
J) Metal Washer
[Φ32 x 1.5mm]
L) Wrench

BRADLEY FLOOR LAMP
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 2 of 2
STEP 1: As you unpack and prepare for assembly, place the contents on a carpeted or padded flat surface area.
STEP 2: Insert the Body (H) onto the Base (I). Attach with Metal washer (J) and Nut (K), tighten using Wrench (L).
STEP 3: Connect Arm (F1) together with Screw (D) by using Allen key (E). Repeat the same step for F2 and F3 as F1.
Put Arm (F) into Body (H) then secure by screwing in Knob (G).
STEP 4: Screw the Upper-Metal Shade (A) and Lower Metal Shade (B) onto the sockets with Socket Rings (C) rotating in a
clockwise direction until tight.
STEP 5: Plug into outlet, turn on switch, and enjoy your new lamp
Use 6W LED bulbs. Do not use bulb that exceeds recommended wattage.
F1
F2
F3