URBAN OUTFITTERS ISOBEL FLOOR LAMP User manual

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 1of 2
ISOBEL FLOOR LAMP
Assembly Instructions
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or air conditioning vents.
Adjust levelers so that the lamp sits flat on uneven floors.
Blot spills, do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED
Shade
Lamp Base
Socket
Metal Tube
Lamp Body

ISOBEL FLOOR LAMP
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 2of 2
STEP 1: Screw the socket (C) onto the lamp body (D) until tight.
STEP 2: Screw metal tube (F) into the bottom of lamp body (C) until tight
STEP 3: Insert cord and metal tube (F) into lamp base (G), pull the cord from the hole in the bottom of the lamp base
and align the lamp body (D) and lamp base (G) at the same time. To ensure a consistent seam and easy alignment,
the marks on the bottom of lamp body (D) must pair up with the marks on the top of lamp base (G). Refer to Fig1 and
Fig2.
STEP 4: Secure the metal tube (F) with lamp base (G) using plastic washer (H) and metal washer (I). Tighten with
wrench (J).
STEP 5: Attach shade (B) to the socket (C) and secure with socket ring (A).
STEP 6: Place bulb (not included) into socket.
STEP 7: Plug into outlet, turn on switch and enjoy your new lamp.
Fig 2
Fig 1