Urbanista Tokyo User manual

Urbanista Tokyo brings you musical enjoyment
and true wireless freedom. With Tokyo, it’s easier
to stay efficient at work and outdo yourself at the
gym or on your evening run. These noise-isolating
earphones with ergonomic design fit most ears and
most occasions. Never let tangled wires get in your
way again.
HANDLING
How to sync the earphones with your Bluetooth device:
Remove the two earphones from the charging case.
They will turn on automatically and the right earbud
(marked with R) will go into pairing mode, ready to
be paired with any Bluetooth enabled device. While
in pairing mode, the LED indicator flashes in red and
blue. Once connected, the indicator flashes in blue.
And, voila, you are now ready to go truly wireless.
Listen to music and take calls without having to
fumble for your phone. The lightweight design makes
these earphones a pleasure to wear.
New Bluetooth connection:
Press the right earphone (R) for 2 seconds to power
on and wait for 10 seconds, the earphones will enter
auto-pairing mode after few seconds. Open your
phone’s bluetooth device to search.
URBANISTA (ENG)
WELCOME TO
THE URBANISTA
COMMUNITY!

HANDLING
The easy-to-use multifunction buttons lets you answer
calls, play and pause your music and issue voice
commands:
Via the multifunction buttons
ON - Hold the right (R) or left earphone (L) for 2 seconds.
OFF - Hold the right (R) or left earphone (L) for 5 seconds.
ANSWER - Tap the right (R) or left earphone (L) once.
END A CALL - Hold the right (R) or left earphone (L) for
2 seconds.
REJECT A CALL - Hold the right (R) or left earphone (L)
for 2 seconds.
ACTIVATE SIRI - Tap the left earphone (L) twice.
PLAY MUSIC - Tap the multifunction button on the right
or left earphone (R/L) once.
PAUSE MUSIC - Tap the right earphone (R) twice.
VOLUME INCREASE - Tap the right earphone (R) once.
VOLUME DECREASE - Tap the left earphone (L) once.
NEXT TRACK - Hold the right earphone (R) for 2 seconds.
PREVIOUS TRACK - Hold the left earphone (L) for 2 seconds.
CONTROLS CONTROLS(ENG)
Multifunction buttons
Left (L) Right (R)
CHARGING THE CASE:
Use the complimentary USB cable to power the char-
ging case by plugging it into any power source, such
as a computer. A full charge takes about 2 hours.
While charging the case, the red LED indicator will
be on. Once the case is fully charged, the red LED
will turn off. A fully charged case will allow you to
charge your earphones 3-4 times (giving you 14
hours of play time).

HANDLING
The easy-to-use multifunction buttons lets you answer
calls, play and pause your music and issue voice
commands:
Via the multifunction buttons
ON - Hold the right (R) or left earphone (L) for 2 seconds.
OFF - Hold the right (R) or left earphone (L) for 5 seconds.
ANSWER - Tap the right (R) or left earphone (L) once.
END A CALL - Hold the right (R) or left earphone (L) for
2 seconds.
REJECT A CALL - Hold the right (R) or left earphone (L)
for 2 seconds.
ACTIVATE SIRI - Tap the left earphone (L) twice.
PLAY MUSIC - Tap the multifunction button on the right
or left earphone (R/L) once.
PAUSE MUSIC - Tap the right earphone (R) twice.
VOLUME INCREASE - Tap the right earphone (R) once.
VOLUME DECREASE - Tap the left earphone (L) once.
NEXT TRACK - Hold the right earphone (R) for 2 seconds.
PREVIOUS TRACK - Hold the left earphone (L) for 2 seconds.
CONTROLS CONTROLS(ENG)
Multifunction buttons
Left (L) Right (R)
CHARGING THE CASE:
Use the complimentary USB cable to power the char-
ging case by plugging it into any power source, such
as a computer. A full charge takes about 2 hours.
While charging the case, the red LED indicator will
be on. Once the case is fully charged, the red LED
will turn off. A fully charged case will allow you to
charge your earphones 3-4 times (giving you 14
hours of play time).