Black & Decker FX710 - B5 User manual

FX710 - B5
www.blackanddecker.ae

ENGLISH
2
Parts Identification
A Pusher
B Measuring jug
C Food processor lid
D1 Secondary blade holder
D2 Fine slicing blade
D3 Coarse slicing blade
D4 French fry blade
D5 Slurry cutting blade
D6 Fine grating blade
D7 Coarse grating blade
E Kneading blade
F Chopping blade
G Primary blade holder
H Food processor jug
I food processor base
J Control knob
K Food processor drive
L Blender Drive
M Blender cover
N Grinder blade
O Grinder jug seal
P Grinder jug
Q Citrus juicer
R Reamer
S Blender jug
T Blender lid
U Filler cap
V Centrifugal juicer
W Centrifugal juicer lid
X Chopper blade case
Y Spatula

3
ENGLISH

4
ENGLISH
Intended use
Your Black & Decker appliance comes with 10
accessories to perform below functions:
Stainless Steel blade for chopping, beating,
creaming, crumbling, cutting, folding in,
mashing, mincing and mixing.
Shredding blade for coarse and fine grating and
shredding vegetables, fruits and cheese.
Slicing blades for coarse and fine slicing of
vegetables and fruits.
French fries blade for potatoes and other hard
vegetables
Slurry cutter blade for slow mashing raw
vegetables/fruits for baby food and for light
peeling or rasping of vegetable pieces with hard
skin.
Separate blade with spatula for kneading dough.
Blender for blending, crushing, foaming,
grinding, pureeing, homogenizing, liquidizing,
milling, shaking and stirring.
Grinder mill for grinding coffee, herbs and
spices.
Juice Extractor attachment for juicing and
pulping non-citrus fruits.
Citrus Juice Extractor for juicing and pulping of
citrus fruits.
Do not use the centrifugal juicer if the rotating
sieve is damaged
Do not use this appliance for any other purpose.
This product is intended for indoor household
use only.
Read this entire manual carefully
before using the appliance.
Safety instructions
• Warning! When using mains-powered
appliances, basic safety precautions,
including the following, should always be
followed to reduce the risk of fire, electric
shock and personal injury.
• The intended use is described in this manual.
The use of any accessory or attachment or
the performance of any operation with this
appliance other than those recommended in
this instruction manual may present a risk of
personal injury.
• Retain this manual for future reference.
Using your appliance
• Always take care when using the appliance.
• Never pull the power supply cord to
disconnect the plug from the socket. Keep the
power supply cord away from heat, oil and
sharp edges.
• Do not place the appliance on or near heat
sources or in a heated oven.
• Do not use the appliance outdoors.
• Always protect the motor unit from water or
excessive humidity.
• If the power supply cord is damaged during
use, disconnect the appliance from the power
supply immediately. Do not touch the power
supply cord before disconnecting from the
power supply.
• Disconnect the appliance from the power
supply when not in use, before fitting or
removing parts and before cleaning.

5
ENGLISH
• Never let the appliance operate unattended.
• Never reach into the jar with your fingers or
an object while the appliance is running.
• Only remove the jar after you have switched
the appliance off and any moving parts have
stopped.
• Do not touch the cutting blades.
• Keep any loose clothing or long hair away
from the feeding tube and any moving parts.
• Care shall be taken when handling the sharp
cutting blades, emptying the bowl and during
cleaning.
• Do not immerse the appliance, cord set or
plug in liquids.
• Position cord so it does not hang over the
edge of worktops & cannot be caught
accidentally or tripped over.
• Caution: Ensure the Blender is turned off
before removing from the stand.
Safety of others
• This appliance is not intended for use by
persons (including children) with reduced
physical sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
After use
• Remove the plug from the socket before
leaving the appliance unattended and before
changing, cleaning or inspecting any parts of
the appliance.
• When not in use, the appliance should be
stored in a dry place. Children should not
have access to stored appliances.
Inspection and repairs
• Switch off the appliance before cleaning,
changing accessories or approaching parts
which move in use
• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches and
any other conditions that may affect its
operation.
• Do not use the appliance if any part is
damaged or defective.
• Do not use the appliance if the blade is
damaged.
• Have any damaged or defective parts
repaired or replaced by an authorised repair
agent.
• Before use, check the power supply cord for
signs of damage, ageing and wear.
• Do not use the appliance if the power supply
cord or mains plug is damaged or defective.
• If the power supply cord or mains plug is
damaged or defective it must be repaired by
an authorised repair agent in order to avoid a
hazard. Do not cut the power supply cord
and do not attempt to repair it yourself.
• Never attempt to remove or replace any
parts other than those specified in this
manual.
Electrical safety
Before use, check that the mains voltage
corresponds to the voltage on the rating plate.

6
ENGLISH
This appliance is double insulated in
accordance with EN 60335-2-14;
therefore no earth wire is required.
• To avoid the risk of electric shock, do not
immerse the cord, plug or motor unit in water
or other liquid.
• Check that the supply voltage shown on the
rating plate of the appliance matches that of
your electrical system. Any connection error
will invalidate the guarantee.
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug
• Connect the brown lead to the live terminal
of the new plug
• Connect the blue lead to the neutral terminal
• If the product is class I (earthed), connect
the
green/yellow lead to the earth terminal
Warning! If your product is class II double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth terminal
• Follow the fitting instructions supplied with
good quality plugs
• Any replacement fuse must be of the same
rating as the original fuse supplied with the
product.
Warning! The above section on mains plug
replacement is for authorized service centre
personals.
Assembly
Wash all detachable parts (see chapter
‘Maintenance and cleaning’).
Assembling the food processor
1. Fit the food processor jug (H) onto the food
processor base (I), secure it by turning it
clockwise.
2. For chopping or kneading fit the required
blade (F or E) onto the primary blade holder
(G).
3. For shredding or slicing, fit the required blade
(D2, D3, D4, D5, D6 or D7) into the
secondary blade holder (D1).
4. Place the assembled blade and holder into
the food processor jug (H).
5. Fit the food processor lid (C) and secure it by
turning it clockwise.
6. Fit the measuring jug (B) into the pusher (A)
and then place the pusher into the food
processor lid.
Note: The blender cover (M) must be in place
for the food processor to work.
Assembling the blender
1. Remove the blender cover (M) from the food
processor base by turning it clockwise and
lifting it off.
2. Place the blender jug (S) onto the blender
drive (L) and secure it by turning
anti-clockwise.
3. Fit the blender lid (T) to the blender jug (S)
and secure it by turning it anti-clockwise.
4. Fit the filler cap (U) to the blender lid (T) and
secure it by turning it anti-clockwise.
Assembling the grinder
1. Fit the grinder jug seal (O) into the grinder
jug (P).
2. Fit the grinder blade (N) into the grinder jug
and secure by turning it clockwise.
3. Place the grinder jug (P) onto the blender
drive (L) and secure it by turning
anti-clockwise.
Assembling the citrus Juicer
1. Fit the food processor jug (H) onto the food
processor base (I), secure it by turning it
clockwise.

7
ENGLISH
2. Fit the citrus juicer (Q) onto the food
processor jug (H), secure it by turning it
clockwise.
3. Place the reamer (R) onto the citrus juicer
(Q).
Note: The blender cover (M) must be in place
for the citrus juicer to work.
Assembling the centrifugal
juicer
1. Fit the food processor jug (H) onto the food
processor base (I), secure it by turning it
clockwise.
2. Fit the centrifugal juicer (V) into the food
processor jug.
3. Fit the Centrifugal juicer lid (W) and secure it
by turning it clockwise.
4. Fit the measuring jug into the pusher and
then place the pusher into the food processor
lid.
Note: The blender cover (M) must be in place
for the centrifugal juicer to work.
Note: The blender cover (M) must be in place
for the centrifugal juicer to work.
Note: Do not use the centrifugal juicer if the
rotating sieve is damaged
Use
1. Place the appliance on a flat, stable surface.
2. Assemble the required accessory as advised
above.
3. Put the ingredients into the required jug.
4. Connect to the mains supply.
5. Turn the control knob to the required setting.
Note: Additional items can be added during use
by using the chutes in the lids and the pusher.
The following settings are available:-
P = Pulse Operation
O = Power Off
1 = Low Speed
2 = Medium Speed
3 = High Speed
The appliance should be disconnected
from the mains supply before
removing the jug.
Recommendations when food
processing
*1 Use the chopping blade (F)
*2 Use the kneading blade (E)
Chopping *1 Vegetables Pulse or 2 15 sec
and fruits
Chopping *1 Meat, cheese 1 20 sec
and chocolate
Blending *1 Soups and 1 20 sec
thick drinks
Pureeing *1 Cooked vegetables 1 or 2 10-15 sec
and soft fruits
Mixing *1 Pastry and scones 2 or 3 40 sec
Mashing *1 Cooked potatoes 3 60 sec
and baby food
Kneading *2 Bread dough 1 20 sec
Folding in *2 Mousse batter 1 15 sec
Creaming *2 Cake batter 1 30 sec
Slicing *3 Vegetables and fruits 2 or 3 5 sec
Slicing *3 Potatoes and cheese 1 5 sec
Shredding *3g Vegetables and fruits 2 or 3 5 sec
Grating *4 Cheese and 1 5 sec
chocolate
Cutting *5
Potatoes for french fries 1 5 sec
Cutting *5 Vegeatables and fruits 1 5 sec
Slow Mashing *6 Raw fruits and 2 or 3 5 sec
vegetables for babyfood
Peeling/Rasping *6 Hard fruit or vegetable 1 5 sec
pieces (3x2cm) with skin
Function Types of food Speed Time

8
ENGLISH
*3 Use the slicing blades (D2 or D3)
*4 Use the grating blades (D6 or D7)
*5 Use the french fry blade (D4)
*6 Use the slurry cutting blade (D5)
Note: The blender should not be run for longer
than 1 minute. After a continuous run of 1
minute, the blender should be allowed to cool
down for at least 2 minutes before further use.
Warning: Pulse mode should not be operated
more than 10 sec at a time.
Warning: While using the slurry cutter blade for
peeling or rasping skin of vegetables, do not use
pusher tightly. This action will slow mash the
vegetable along with skin.
Recommendations when
blending
Note: The blender should not be run for longer
than 1 minute. After a continuous run of 1
minute, the blender should be allowed to cool
down for at least 2 minutes before further use.
Warning: Pulse mode should not be operated
more than 10 sec at a time.
Recommendations when
grinding
Note: The dry grinder should not be
continuously run for longer than 40 seconds.
Warning: Pulse mode should not be operated
more than 10 sec at a time.
Warning: Max capacity of Grinder mill is 50g
and mincer mill is 150g
Warning! The grinder should NOT be used for
wet grinding of hard food materials like pulses,
beans, grains etc. This will lead to damage of
blades and reduction of motor life span.
Recommendations when
Juicing
*1 Use the centrifugal juicer (V)
*2 Use the citrus juicer (Q)
Note: Fruits that contain starch, such as
bananas, papayas, avocados, figs, strawberries
and mangoes are not suitable for processing in
this juice extractor attachment. Use the stainless
steel blade attachment of food processor,
blender or a stick blender to process these
fruits.
Blending Liquids 3 15 sec
Liquidizing Fruits or vegetables 2 30 sec
cut in cubes with equal
amount of water
Crushing Ice cubes of 1 or 2 15 sec
dimension 3x2cm
Foaming milk shakes, juices etc 2 or 3 20 sec
Pureeing Vegetables and 2 30 sec
soft fruits
Stirring Batter or soups 1 1 min
Function Types of food Speed Time
Juicing *1 Non-citrus fruits 2 or 3 1 min
Collecting pulp *1 Draining and collecting 2 or 3 1 min
the pulp of non-citrus fruits
Juicing *2 Citrus fruits 1 1 min
and ground spices
with water
Collecting pulp *2 Draining and collecting 1 1 min
the pulp of citrus fruits
Function Types of food Speed Time
Dry grinding Coffee beans Pulse 10-20 sec
Dry grinding Dry herbs 1 20 sec
Dry grinding Spices Pulse 10-20 sec
Function Types of food Speed Time

9
ENGLISH
Note: The juicer is not suitable for processing
very hard and/or fibrous/starchy fruits,
vegetables or plants such as sugar cane.
Note: The Juicer should not be run for longer
than 1 Minute. After each 1 Minute use, the
Juicer should be allowed to cool for at least 1
minute. After 3 consecutive cycles the juicer
must be allowed to cool for 15 minutes before
further use.
Useful advice
• Place the appliance on a clean, flat work
surface.
• Connect the appliance to a suitable electrical
supply. Rotate the control knob (J) to the
required speed.
• When blending is complete return the control
knob to the off (0) position.
• Once the blade has come to a complete
stop, lift the jug from the blender body (I).
• Remove the lid and pour the ingredients into
a suitable container.
Note: Ingredients can be added by inserting
them through the hole left when the filler cap (A)
is removed.
Warning! Never operate the Blender without the
lid fitted.
Warning! Never operate the Food processor
without the lid fitted.
Maintenance & cleaning
• Switch the appliance off, remove the plug
from the wall socket and wait until the blade
has stopped rotating.
• The appliance is easier to clean if you do so
immediately after use.
• Do not use abrasive cleaning agents,
scourers, acetone, alcohol etc. to clean the
appliance.
• All removable parts can be cleaned with a
cleaning brush in warm water with some
washing-up liquid and rinse them under the
tap.
• Remove the dirty parts from the motor unit.
Clean the motor unit with a damp cloth.
• Never immerse the motor unit in water nor
rinse it under the tap.
Technical data
Voltage 220 – 240 Volts
Supply 50/60 Hz
Weight 5.24 Kg.

10
ENGLISH
Protecting the environment
Separate collection. This product must not
be disposed of with normal household
waste.
Should you find one day that your Black &
Decker product needs replacement, or if it is of
no further use to you, do not dispose of it with
other household waste. Make this product
available for separate collection.
• Black & Decker provides a facility for
recycling Black & Decker products once they
have reached the end of their working life.
This service is provided free of charge. To
take advantage of this service please return
your product to any authorised repair agent
who will collect them on our behalf.
• You can check the location of your nearest
authorised repair agent by contacting your
local Black & Decker office at the address
indicated in this manual. Alternatively, a list of
authorized Black & Decker repair agents and
full details of our after-sales service and
contact are available on the Internet at:
www.2helpU.com.
Warranty
Black & Decker is confident of the quality of its
products and offers an outstanding warranty.
This warranty statement is in addition to and in
no way prejudices your statutory rights.
The warranty is valid within the territories of the
Member States of the European Union and the
European Free Trade Area.
If a Black & Decker product becomes defective
due to faulty materials, workmanship or lack of
conformity, within 24 months from the date of
purchase, Black & Decker warranty to replace
defective parts, repair products subjected to fair
wear and tear or replace such products to ensure
minimum inconvenience to the customer unless:
The product has been used for trade,
professional or hire purposes;
The product has been subjected to misuse
or neglect;
The product has sustained damage
through foreign objects, substances or
accidents;
Repairs have been attempted by persons
other than authorised repair agents or
Black & Decker service staff.
To claim on the warranty, you will need to submit
proof of purchase to the seller or an authorised
repair agent. You can check the location of your
nearest authorised repair agent by contacting
your local Black & Decker office at the address
indicated in this manual.
Alternatively, a list of authorised Black & Decker
repair agents and full details of our after-sales
service and contacts are available on the Internet
at: www.2helpU.com.