USP DURAMAX Foundation Kit User manual

Ver : 1.0
OWNER’S MANUAL /
Instructions for Assembly
Size 8 Ft x 4 Ft / 2.4 m. x 1.2 m. (Approx.)
Call us for any missing or damaged parts.
Do not return to the store.
Customer
Service Hotline
[phone]
www.duramaxbp.com
TOOLS YOU WILL NEED
Cordless Drill - Philips Head Rubber mallet Hand Gloves Goggles Carpenters Square Level - 3ft.
Foundation Kit
Pent Roof Metal Garden Shed
ALL PURPOSE METAL STORAGE SHEDS

1
1. Assemble the channel (FC1B) & (FC2B) together using (S2) screws.
Make 2 sets.
FC2B
FC1B
2. Make a frame with the sub assemblies as shown below.
Make sure while assembling, the
channel position should be as
shown.
Note
Channel Position
FC1B
FC2B
FC3C
FC1B
FC3C
FC2B
‘U’ CHANNEL
Note: Check all parts prior to installation.
CODE DESCRIPTION
FC1B FOUNDATION ‘U’ CHANNEL 2
FC2B FOUNDATION ‘U’ CHANNEL 2
FC3C FOUNDATION‘U’ CHANNEL 2
FC4C FOUNDA TION ‘U’ CHANNEL 4
FC5B FOUNDATION ‘U’ CHANNEL 3
FCC FOUNDATION ‘U’ CHANNEL 4
ACCESSORIES
CODE DESCRIPTION QTY
S2 DIA. 4.2 x 16mm. (5/32” x 5/8”)
SHEET METAL SCREW 48
Parts List
S2
FRONT SIDE
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
S2

3. Fix the channel (FCC) to all the four corners to make a perfect
frame. See Fig.
2
4. Fix the channel (FC4C) into the main frame as shown.
See Fig.
Make sure while assembling, the
channel position should be as
shown.
Note
5. Fix the channel (FC5B) into the frame with screws as shown.
See Fig.
FCC
FCC
FCC
FCC
FC4C
FC4C
FC4C
FC4C
FC5B
FC5B
FC5B
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
S2
S2
S2

3
6. Assemble base bar back left (BLB) and base
bar back right (BRB) with four (S1) screws.
See fig. 1 & 2.
7. Place the base bar assembly on top of the
foundation. Use (S2) screws to fix the assembly to
foundation.
Fig.1 Fig.2
BLB
BRB
S1 BLB
BRB
8. Insert the base bar side (BSC) into (BLB) &
(BRB) secure with two (S1) screws on both sides.
See blowup.
S2
Fig.1
Fig.2
Step 1
Step 2
BSC
BLB
BRB
BSC
S1
S1
BLB
BRB
Back
BSC
BSC
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
Step 1 Step 2
1 & 2
1
2
1
Fig.1

4
9. Line up the holes with foundation and secure with
(S2) screws.
10. Place the base bar (BBF) on top of (BSC)
on both sides. Secure with (S1) screw to (BSC)
on both corners. See fig. 1 & 2.
S2
BBF
BSC
Fig.1
Fig.2
BBF
BSC
S1
S2
BSC
BSC
BBF
BBF
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
Fig.1
Step 1
1
2
Step 2
Fig.2
Step 1
Step 2
1&2
1&2

5
11. Secure the base (BBF) to the foundation with (S2) screws.
12. Place exterior grade CDX 3/4” (19mm) plywood inside
the foundation. See fig.
S2 BBF
BBF
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
Fig.1
1
1
OPTION - 1

6
14. After completing the assembly of the base bar fill the
concrete upto the foundation top surface.
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
13. Place the entrance taper channel (ECB) on
top of the (BBF). Secure with (S2) screws to the
foundation. See fig. 1 & 2.
S2
Fig.1 Fig.2
ECB
BBF
Step 1 Step 2
OPTION - 2

U.S. Polymers, Inc.
1057 S. Vail Ave
Montebello, CA 90640,
United States of America RD-1.0 2015-07-07
SKU#---------