USX STAR STL090 User manual

For 37-82" TV
STL090
INSTRUCTION MANUAL
USA-C0
If you have any questions along the way, just message to us.
We’re ready to help!
TM

2
Before getting started, let’s check below lists to make sure it is just right for you!
2
3
4
5
Does your TV
(including accessories)
weigh MORE than
132 lbs. (60 kg)?
What is your
wall made of?
Do you have
all the tools
needed?
(NOT INCLUDE)
CAUTION
No? Perfect – you may continue.
Yes? This mount is NOT compatible.
Drywall with
wood studs? CAUTION:
CAUTION: DO NOT exceed the maximum weight
indicated. This mounting system is intended for use only
with the maximum weights indicated. Use with products
heavier than the maximum weights indicated may result
in collapse of the mount and its accessories, causing
possible injury.
Solid concrete ?
Stud
Finder
1/8 in.
(3 mm)
Wood
Drill Bit
● This product is designed for use in wood stud, solid concrete walls - DO NOT install into drywall alone
● The wall must be capable of supporting five times the weight of the TV and mount itself
● Do not use this product for any purpose not explicitly specified by manufacturer
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Unsure?
3/8 in.
(10 mm)
Masonry
Drill Bit
Hammer
1
Check your TV
VESA is within
Min and Max size
No? This mount is NOT compatible.
Yes? Perfect !
MAX:600mm/23.62"
(MIN:150mm/5.91")
MAX:400mm/15.75"
(MIN:100mm/3.94")
DO NOT
install into
drywall alone
132 LBS
(60 kg)
CAUTION: PLEASE READ ENTIRE MANUAL PRIOR TO USE AND SAVE THESE INSTRUCTIONS
!
!
Per fect !Per fect !
Wood Stud Install
Concrete Install
Message to us via Amazon.
!
Tape
Measure Pencil Screw driver
Electric
Drill
3/8 in.
(10 mm)
Socket
Wrench

3
TV INTERFACE WALL PLATE
SIDE VIEW
203.2mm/8"
304.8mm/12"
406.4mm/16"
609.6mm/24"
164mm/6.46" 222mm/8.74"
661mm/26"
Dimensions
33mm/1.30"
MAX:600mm/23.62"
MIN:150mm/5.91"
MAX:400mm/15.75"
MIN:100mm/3.94"
SIDE VIEW
0~-9°
417mm/16.42"
508mm/20"

TV Brackets Wall plate(Left)
Wall plate(Right)
Mounting template
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact
Customer Service.
Never use damaged parts!
NOTE: Not all hardware included will be used.
Parts and Hardware for STEP 1
4
Parts and Hardware
!
03 x2 203.2mm(8")
406.4mm(16")
609.6mm(24")
01 x1 02 x1

5
Parts and Hardware for STEP 2
Level
Spacers
TV Screws
A1 x4
M4x12mm
M6x15mm
M4x30mm
M6x35mm
x4 x4
x4 x4
M8x45mm
M8x22mm
10mm
2.5mm
x4
x4x8 x4
B1
C1
D2
C2
B2
H
G
F
M8x25mm
x4
D1
x4
A2
x1
I
x4
E
Washer
Contact us at telephone [phone] or
message to us to have these additional pieces
shipped directly to you.
Concrete Wall Anchor
Ø10x50mm 4pcs
Concrete wall anchor (NOT INCLUDED)
Lag Bolt
ST6x60mm
Washers
M6

6
Assemble Wall plate STEP 3
Wall plate
04
01
01 02
Wall plate(Left)
Screw driver
Loosen
Tighten

M8
M6
M4
1-1 Select TV Screws
7
STEP 1 Attach Brackets to TV

1-2 Figure out the suitable position of brackets
INSTALL UP/DOWN IF NEEDED TV BRACKETS MUST BE LEVEL
8
!
!
LOW MOUNTING HOLES HIGH MOUNTING HOLES
03

Yes, choose suitable screws, washers and spacers.
1-4 Attach the TV Plate
No!
No, choose suitable screws and washers.
1-3 Need Spacer?
9
C2
B2 D2
C1
B1 D1
E
03
03
GF H
E

Centre line
CAUTION: Avoid potential personal injury or property damage!
● Drywall covering the wall, must not exceed 5/8 in. (16 mm)
● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
● Maximum horizontal space between fasteners: 24 in. (609.6 mm)
● Stud center must be verified
1. Locate your studs. Verify and mark the center of the stud by finding the stud edges using a thin nail,
or an edge to edge stud finder.
2. Position the mounting template at your desired height and line up the holes with your stud center line.
Level the mounting template and mark the hole locations.
Again, find another wood stud
16"/24"
Wall
Wall
Mounting template
10
STEP 2A Attach Wall Plate to Wall Wood Stud Option
!
1 2
I

3. Drill pilot holes using a 1/8 in. (3 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2.5 in. (64 mm). Be sure to drill into the center
of the studs.
CAUTION: Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts.
Go to STEP 3 on PAGE 14.
1/8"
(3mm)
No!
4. Install wall plate using lag bolts and washers . Tighten the lag bolts only until they are
pulled firmly gainst the wall plate.
Wall
11
2.5"(64mm)
!
A1
04
!
A2
34
Wall
A1 04
A2
I

3/8"
(10mm) 2.5"(64mm)
CAUTION: Avoid potential personal injury or property damage!
● Mount the wall plate assembly unit directly onto the concrete surface
● Minimum solid concrete thickness: 8 in. (203 mm)
1. Position the mounting template on the wall at your desired height. Level the mounting template and
mark the hole locations.
2. Drill four pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2.5 in. (64 mm).
Wall Wall
Mounting template
12
STEP 2B Attach Wall Plate to Solid Concrete Wall
!
!
1 2
I

CAUTION: Be sure the anchors are seated flush with the concrete surface.
CAUTION: Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts.
3. Insert anchors.
No!
4. Insert wall plate using lag bolts and washers . Tighten the lag bolts only until they are
pulled firmly against the wall plate.
Wall Wall
13
!
!
A1
04
A1 04
A2
A2
34
I
Please contact us at telephone [phone] or
message to us to have these additional pieces shipped
directly to you.
Concrete Wall Anchor
(Not included)

14
STEP 3 Wall Plate Installation Integrity Test
132 LBS (60 kg)
Before hanging TV, please try to pull the mount to make sure that it has been assembled on the wall
tightly.

Pull down
TV Brackets
TV
1 2
15
STEP 4 Hang and Secure TV to Wall Plate

16
Tilting angle adjustment (0°/-9°)：
Pull TV to your desired angle then fasten tilting bolts with Screw driver.
0°
-9°
Loosen
Tighten
STEP 5 Adjustments
Screw
driver

Pull down
the straps
STEP 6 Take Down the TV from the Mount
TV
1 2
17