UTEPO SFP-1.25G-550M User manual

Please follow the installation step
Please check the equipment and accessory before installation and contract Product dealer
if lose .
SFP optical module 1 PC
User manual 1 PC
1) Turn off equipment power before installation, installation with power maybe damage
equipment；
2) Put SFP optical module insert SFP slot；
3) Check out installation and damage of equipment , confirm all the connection, connect
power line to provide system power.
4) Confirm optical fiber communication is normal.
Installation step
SFP optical module is a standard SFP optical module. the product use two multi-mode
fibers,the rate can reach 1.25Gbps, transmission distance can reach 550m. the equipment
can adapt optical fiber transceiver with SFP slot, optical Ethernet switch equipment, also
can be used in Ethernet, telecom, optical fiber communication.
1.25G duplex-LC multi-mode 550m SFP optical module
1
Feature
Use SFP package type, LC connector, support SFF8472 standard；
Use 850nm FP laser and PIN photo detector;
Support hot plug；
Multimode fiber can achieve 550m data transmission distance;
Meet (LVPECL) standard data input and output port;
Low EMI for environment ,high eletrostatic protection;
Meet IEC-60825 laser safety standard.
Board diagram
SFP Socket Optical Fiber Port
SFP optical module

2
SFP optical module
Specification
Item
Description
Power
Power supply
By the host power supply
Voltage range
DC 3.15V～3.45V
Consumption
1W
Optical
Optical wavelength
850nm
Optical power
-8dBm～-3dBm
Optical sensitivity
-19 dBm
Transmission
Fiber type
Multi-mode fiber50/125um
Fiber port
LC
Transmission distance
550m
Protection
ESD
1a contact discharge 3 level
1b air discharge 3 level
Per：IEC61000-4-2
Environmental
Working temperature
0℃~70℃
Storage temperature
-40℃~70℃
Humidity（non-condensing）
0~95%
Mechanical
Dimension (L×W×H)
55.4mm×13.7mm×6.25mm
Material
Stainless steel
Color
White
Weight
17g
Product are subject to change without prior notice
Trouble shooting
Please follow the step below to solve the problem
Confirm the equipment installation according to the manufacture’s requirement;
Insert module to be same with the requirement;
If still can’t troubleshooting , please contrast with the manufacture. Please contrast
manufacture below can’t solve the problem.