V-Sun BTGP38 User manual

User’s Manual of BTGP38 Bluetooth GPS Receiver V3.0 V-SUN Electronic Co., Ltd
User’s Manual of BTGP38 Bluetooth GPS Receiver
V3.0
V-SUN Electronic Co., Ltd
R1603, Construction Group Building, Hongling Mid Road, Shenzhen
TEL:[phone] FAX:[phone]
http:www.V-SUN.cc E-Mail:[email protected]
V-SUN Electronic Co., Ltd WWW.V-SUN.CC

User’s Manual of BTGP38 Bluetooth GPS Receiver V3.0 V-SUN Electronic Co., Ltd
I Instruction to Product
1. Summary
BTGP38, a high-tech product combines the advanced Bluetooth technology and GPS
technology. Through, Bluetooth technology, you can receive GPS data through intelligent
mobile phone, PDA, laptop and desktop for location and navigation.
2. Features
（1） Every low electricity cost and work up to maximum 20 hours
（2） High-sense, good-performance GPS chip, receiving 16 satellites simultaneously
（3） Accord with Bluetooth 1.2 Specification CLASS 2
（4） Support Bluetooth serial communication Profile (SPP Profile)
（5） Compatible with li-battery and charger of Nokia mobile (e.g.N70)
（6） 3 LED indicate statues of Bluetooth, GPS and recharging
（7） Support the baud rate 9600bps in NMEA-0183 standard
（8） Small-size, humanized design, portable, cute appearance
V-SUN Electronic Co., Ltd WWW.V-SUN.CC

User’s Manual of BTGP38 Bluetooth GPS Receiver V3.0 V-SUN Electronic Co., Ltd
3. Technical Index
General Index
Receivablefrequency L1,1575.42MHZ
C/Acode 1.023MHZ
Channel 16
Sensibility Search -147dBm
Track -152dBm
Precision Location 7mCEP90％，3m CEP 50％（SA off）
Speed 0.1m/s
Location time
Hotstartup 12s,average
Warmstartup 38s,average
Coldstartup 60s,average
Dynamic condition
Altitude max. 10 km
Horizontalspeed 515m/s
Acceleration Max. 4g
GPS protocol
NMEA-0183 ASIC protocol
Default NMEA GGA，GSA，GSV and RMC，(VTG，GLL and RMS optional)
9600bps baud rate，8 data bits，1 stop bit，no check bit
Bluetooth index
Bluetoothcode V1.2
Emissionpower Class2(4dBmmax)
Receiving sensibility -80dBm(Bit error rate less than 0.1％)
Communication distance 10m typical (free space)
Profile Communication Profile Serial Port Profile (SPP)
Power consumption
Workingcurrent 45mAtypical
Workingvoltage 3.7V
Chargeablevoltage 5.7V
Battery Rechargetime 2.5hrstypical
Working time About 20hr, track after the charging is full
Environment
Workingtemperature -10℃to +60℃
Storagetemperature -20℃to +85℃
V-SUNElectronicCo.,Ltd WWW.V-SUN.CC

User’s Manual of BTGP38 Bluetooth GPS Receiver V3.0 V-SUN Electronic Co., Ltd
II Hardware Features
1. Size: 72.8(L)x45.8(W)x18.8(H)mm
2. Packing list
1. Main unit 1
2. Chargeable li-battery 1
3. User’s manual 1(or 1 CD)
4. Home charger 1
5. Car charger 1
Main unit Battery CD of instruction Charger Car charger
3. Description
Blue LED, indicates the working status of bluetooth
Green LED, indicating the working status of GPS
Red LED, indicating the working status of charging
Switchforpowersupply,LeftforON,RightforOFF
Powerextension
4．LED status
LED Status Description
On indicates GPS position no fixedGreen LED
Fast flash indicates GPS position fixed
Fast flash indicates Bluetooth in stand-by modeBlue LED
Slow flash indicates Bluetooth in connection
Constant on Indicates : it is under chargingRed LED
Off Charging is completed
V-SUNElectronicCo.,Ltd WWW.V-SUN.CC

User’s Manual of BTGP38 Bluetooth GPS Receiver V3.0 V-SUN Electronic Co., Ltd
III Operation Instruction
1. Load battery
Open the cover of battery door, and load the battery in right direction. Close the battery door..
2. Charge
Plug the AC end of the charger into main power supply socket. Plug the DC charger into the
hole on the product. Then, the red LED turns on, indicating it is charging. In about 2.5hr, red
LED turns off and the charger is completed.
Note: To maximize the lifetime of the battery, please charge it continuously for at least 10 hr for
the first time.
3. Set up wireless connection
Power on, the green LED turns on, indicating the state of location. Blue LED swiftly flashes,
indicating that it enters to matching state. Now, you input search command on your Bluetooth
device (computer, PDA, mobile or laptop etc). When it searches out, select “Vsun-GPS” and
then input the code“0000”, so that the matching is complete.
4. Test on computer
After the matching is completed, the computer will prompt that there is a serial port. Write
down the number of it and open the test software in the CD. Select the said port and set the bit
rate at 9600bps. Click “Open” to open the serial port and then it will display the current locating
data.
SerialportOn/Off
Satellite distributing map Serial port number, Bit rate Configure the serial port
Satellitelocatingdata
ReceivedsatellitesignalS/N NMEAdata
IV Application
This product can send data relating to current location and movement information to the
navigation software of intelligent mobile or PDA through Bluetooth technology and assists the
navigation software to navigate and track. For detailed operation, please see the instruction
document of navigation software.
V-SUNElectronicCo.,Ltd WWW.V-SUN.CC

Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Modifications not authorized by the manufacturer may void users authority to operate this device.