V-TAC VT-411 User manual

This marking indicates that this product
should not be disposed of with other
household wastes.
Caution, risk of electric shock.
In case of any query/issue with the product, please reach out to us at: [e-mail]
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
INSTRUCTION MANUAL
SOLAR LED FLOOD LIGHT
INTRODUCTION
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please
read these instructions carefully before starting the installation and keep this manual handy
for future reference. If you have any another query, please contact our dealer or local ven-
dor from whom you have purchased the product. They are trained and ready to serve you at
the best.
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the
manual in multiple languages.

TECHNICAL DATA
MODEL VT-411 VT-432
SKU 10313, 10314 10310, 10311,
LUMENS 1500 LM 4800 LM
EQUIVALENT WATT 100 W 300 W
LEDs SMD 28358x44 pcs SMD 2835x90 pcs
BATTARY PACK Li-ion Battery, 18650
3.7V, 3600mAh, 13.32Wh
LiFePO4 Battery, 32700,
6.4v, 6000mAh, 38.4Wh
MONO SOLAR PANEL 4.5W, 5.5V 12.5W,10V
DIGITAL PIR SENSOR 120°/6 Meters 120°/8 Meters
LIGHTING AREA 60-80m2 100-150m2
LAMP SIZE 152.7x143.8x32.3mm 199.7x189x189.9x49mm
SOLAR PANEL SIZE 202.1x220.9x24mm 354x254.2x38.3mm
INSTALLED HEIGHT 2~4 Meters 2~5 Meters
INSTALLATION DISTANCE 8-10 Meters 10-14 Meters
WARRANTY
BEAM ANGLE 120°x60°, Maximum Lighting design, Bigger Lighting Area
WORKING MODES Auto Sensor Mode
Keep Lighting Mode (Can DIY Birghtness and lighting time by remote)
HARGING TIME 4~6 Hours Stong sunshine to fully charge
LIGHTING TIME Up to 60Hours according to dierent working mode
LAMP BRACKET 360° Adjustable
SOLAR PANEL BRACKET 270° Adjustable
CONNETION CABLE 5 Meters Long
HOUSING MATERIAL ABS+PC+ALUMINIUM, Anti-UV, V0 Fireproof
PACKING 1 Lamp, 1 Solar Panel, 1 Remote Control +2 AAA Battaries, 4 Set Screws, 1 user
Manual
WARNING
1. This is a solar powered lamp, please install the solar panel in a location where can get enough sunshine.
2. Please note the lighting time depends on sunshine duration & working mode.
3. The On/O button on the lamp is power-o switch, helpful to save power consumption. Also the lamp can still get
solar charge at day time when the lamp is turned o.
4. Built-in intelligent IC is with over-charge and over-discharge protection, safe & durable.
5. Non-professionals please do not disassemble the lamp.
6. Please do not dispose the battery with household garbage to avoid explosion.
INSTALLATION
Prepare the lamp, accessories and tools well, confirm the installation location and wire length.
1. Drill 2 holes of 08mm with a depth of 60mm on the wall, fix the lamp on the wall with expansion plugs and
screws.
2. Drill 2 holes of $8mm with a depth of 60mm on the wall, fix the solar panel on the wall with expansion plugs
and screws.
3. Connect the wire of the solar panel to the lamp and screw it tightly.
4. Press the button on the lamp to activate the remote control, then use remote control to set desired working
mode.

TWO OPTIONAL WORKING MODES
MODE A: AUTO SENSOR MODE
MODE B: KEEP LIGHTING MODE
On/O Button
Please press the button on the lamp first, the lamp will
automatically turn on and enter Auto Sensor Mode, and the
remote control is activated at the same time. Then, please use
remote control to set desired working mode.
Lamp automatically lights up at night and turns
to full brightness when motion is detected in the
range ≤8Mtrs, then turns to lower brightness in
60 seconds of no motion.
Lamp automatically lights up at night and keep
selected brightness for 3H/5H/8H, aer which or
when the battery power is less than 30%, lamp
turns to Auto Sensor Mode.
Install Lamp Install Solar Panel
Connect Wire Turn ON Lamp, DIY working
mode by remote

OPERATION OF INDICATOR LIGHT
WIDE APPLICATIONS
This lamp has a red indicator light, which shows the charging state of the lamp.
Widely used for construction site, gate, courtyard, corner, garden, industrial area, warehouse,
garage, parking lot, roof, factory, pathway, farm, pavilion, countryside, pergola, bus station etc.
Working Status of Solar Lamp Indicator Light Status During the Day Indicator Light Status At Night
Battery power is more than 80%. Stay on O
The battery charges and discharges
normally. Flash every 3 seconds O
Battery power is less than 30%. Flash every 3 seconds Flash 3 times, then turn o for 3
seconds. Keep looping.
Useless Buttons
*Press ON, Lamp turns on
*On/O Switches on the remote control are with memory function.
Press OFF, Lamp flicks 3 times then turns o.
*Press Auto, The Lamp enters AUTO sensor mode directly.
*Lamp Brightness and Lighting time are not selectable under Auto Sensor mode.
Keep Lighting Time * These 7 keys(in gray background) are only
used to adjust lighting time and brightness
of Keep Lighting Mode. * Please press the
3H/5H/8H firstly, the lamp will enter Keep
L i g h t i n g M o d e a u t o m a t i c a l l y , t h e n p r e s s t o
/ / / / /set desired brightness.
For example: Press + + , lamp works
as below: Lamp lights up at night and keep
45% brightness for 5Hrs. Aer 5Hrs or when
battery power is less than 30%, lamp turns
to Auto Sensor Mode.
60% Brightness
30% Brightness
+15% Brightness by each press (Max
60% Brightness)
-15% Brightness by each press (Min 15%
Brightness)
OPERATIONS OF DIY WORK MODE BY REMOTE CONTROL