V-TAC VT-767-7 User manual

In case of any query/issue with the product, please reach out to us at: [e-mail]
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
INTRODUCTION & WARRANTY
TECHNICAL DATA
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the product. The products
are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
INSTRUCTION MANUAL
LED SOLAR FLOOD LIGHT
MODEL VT-767-7
SKU 8278, 8279
LUMENS 850 Lm
POWER 8 W
SOLAR PANEL 4.4W, DC 5.5V, Mono with
Tempered glass
BATTERY
18650 Li-ion, 3.7V,
4000mAh, 14.8 Wh (Re-
peatable)
CHARGING TIME 12-15 Hours
WORKING TIME Maximum 24 Hours
WORKING MODE 2 Optional working modes
LED TYPE SMD 2835x104 Pcs (Front
54 Pcs+Back 2 Pcs)
DETECTION ANGLE 120°
SENSOR RANGE 2-6 M
COLOR
TEMPERATURE 4000K
LAMP DIMENSION 232x220.6x121.4 mm
BODY TYPE ABS+PC, Anti UV
INSTALLATION
HEIGHT 2-4 M

This marking indicates that this
product should not be disposed of
with other household wastes.
WARNING
INSTALLATION INSTRUCTIONS
1. Please make sure to turn o the power before starting the installation.
2. Installation should be done by certified electrician.
. 3 The light source of this luminaire is not replaceable; when the light source reaches its
end of life the whole luminaire shall be replaced.
The recommended installation height is 2-4 meters.
1. Please use measure card to mark holing positions and drill 3 holes of $6mm.
2. Install 3 expansion plugs into the holes.
3. Install 3 screws in the expansion plugs, allow the screws to protrude slightly.
4. Align the lower notch on the back of the light with the lower screw and align the
holes at the top of the light with the upper screws to fix the light well.
5. Press the button on the back of the light to turn on the light and select desired
working mode.
BUTTON
NOTCH
PACKAGING CONTENT
1x Solar Light 1x Measure Card 1x Accessory Bag 1x User Manual
MANUAL

TWO OPTIONAL WORKING MODES
MODE A: SENSOR MODE
Press the button 1st time, the back light flashes once, it’s Sensor Mode:
Press the button 2nd time, the back light flashes twice, it’s Keep Lighting Mode:
Press the button 3rd time, lamp turns o.
When battery power is greater than 30%:
Lamp automatically lights up at night and
turns to full brightness when motion is
detected within the range of ≤6mtrs, then
dims to lower brightness(front light and
back light both on) aer 20 seconds of no
motion.
When battery power is less than 30%:
Lamp automatically lights up at night and
turns to full brightness when motion is
detected within the range of ≤6mtrs, then
dims to lower brightness(front light o,
only back light on) aer 20 seconds of no
motion.
Lamp automatically lights up at dusk and remains 50% brightness.
Aer 5 hours or when the battery power is less than 30%, it turns to energy saving mode,
which is lamp automatically turns to 50% brightness when motion is detected within the
range of ≤6mtrs, then dims to lower brightness(front light o, only back light on) aer 20
seconds of no motion.
MODE B: KEEP LIGHTING MODE
MODE C: OFF

MAINTENANCE & WARNING
• Do not use solvents, petrol, etc. Otherwise the light will be damaged.
• Clean the light with a dry, lint-free cloth.
• Check the solar panel for dirt regularly. If dirt or is present remove it to guarantee
flawless function of the product.
• Especially during the winter, keep the product free from snow and ice.
• Confirm installation direction is correct (solar panel should be at top)
• Confirm no objects blocking the solar panel to receive sunlight
• Keep away from the fire.
• Don’t immerse in the water
BATTERY REPLACEMENT
1. Loosen the screws, open battery cover.
2. Remove old battery, change new battery and connect positive and negative electrode correctly.
( 2PCS* Battery 18650, 3.7V, 2000mAh, 7.4Wh)
3. Then install back the cover, lock the screws.
1 2 3