V-tech CS6729 User manual

BC
CS6729
CS6729-2
CS6729-21
CS6729-3
CS6729-4
CS6729-4D
CS6729-5
DECT 6.0 cordless telephone
Go to www.vtechphones.com
to register your product for
enhanced warranty support and
latest VTech product news.
User’s manual

Congratulations
on purchasing your new VTech product. Before using this telephone, please read
Important safety instructions on page 70 of this manual.
This manual has all the feature operations and troubleshooting necessary to install and
operate your new VTech telephone. Please review this manual thoroughly to ensure
proper installation and operation of this innovative and feature rich VTech product.
For support, shopping, and everything new at VTech, visit our website at
www.vtechphones.com. In Canada, please visit www.vtechcanada.com.
The ENERGY STAR®program (www.energystar.gov) recognizes
and encourages the use of products that save energy and help
protect our environment. We are proud to mark this product with
the ENERGY STAR®label indicating it meets the latest energy
efficiency guidelines.
T
Compatible with
Hearing Aid T-Coil
TIA-1083
Telephones identified with this logo have reduced noise and
interference when used with most T-coil equipped hearing aids and
cochlear implants. The TIA-1083 Compliant Logo is a trademark of the
Telecommunications Industry Association. Used under license.
Register online to get an additional 3-month warranty!
Visit www.vtechphones.com.
Registration
Register your product online for enhanced warranty support.
Product news
Learn about the latest VTech products.

Table of contents
i
Getting started . . . . . . . . . . . . . . . . . 1
Partschecklist ..................... 1
Telephone base and charger installation. . .2
Battery installation . . . . . . . . . . . . . . . . . . 3
Batterycharging.................... 4
Installation options . . . . . . . . . . . . . . . . . . 5
Tabletop to wall mount installation . . . . . . 5
Wall mount to tabletop installation . . . . . . 6
Are you a new cable or VoIP subscriber? . . .7
Did you subscribe to voicemail service
from your telephone service provider? . . . 7
Telephone base layout . . . . . . . . . . . . . . . 8
Handsetlayout..................... 9
Telephone settings. . . . . . . . . . . . . 11
Usingthemenu ................... 11
Handset ringer volume . . . . . . . . . . . . . . 11
Telephone base ringer volume . . . . . . . . 12
Ringertone....................... 12
Quietmode....................... 13
Setdateandtime.................. 14
LCDlanguage..................... 15
Voicemail number . . . . . . . . . . . . . . . . . . 16
Clearvoicemail.................... 17
Dialmode........................ 17
Keytone......................... 18
Homeareacode................... 18
Telephone operation . . . . . . . . . . . 20
Makeacall....................... 20
Predialacall...................... 20
Answeracall ..................... 20
Endacall........................ 20
Speakerphone .................... 20
Volume.......................... 21
Mute............................ 21
Callwaiting....................... 21
Temporary ringer silencing . . . . . . . . . . . 21
Temporary tone dialing . . . . . . . . . . . . . . 22
Redial .......................... 22
Check voicemail . . . . . . . . . . . . . . . . . . . 23
Chaindialing...................... 23
Transferacall..................... 24
Findhandset...................... 25
Webaddress ..................... 25
Multiple handset use . . . . . . . . . . . 26
Join a call in progress . . . . . . . . . . . . . . 26
Intercom......................... 27
Answer an incoming call during
anintercomcall ................... 27
Call transfer using intercom . . . . . . . . . . 28
Directory.....................29
About the directory . . . . . . . . . . . . . . . . . 29
Add a directory entry . . . . . . . . . . . . . . . 30
Add a directory entry . . . . . . . . . . . . . . . 31
Review and dial from the directory . . . . . 32
Alphabetical search . . . . . . . . . . . . . . . . 32
Edit a directory entry . . . . . . . . . . . . . . . 33
Delete a directory entry . . . . . . . . . . . . . 33
Speeddial........................ 34
Assign a speed dial entry . . . . . . . . . . . . 34
Reassign a speed dial entry. . . . . . . . . . 35
Dial a speed dial number . . . . . . . . . . . . 35
Delete a speed dial entry . . . . . . . . . . . . 36
CallerID......................37
AboutcallerID.................... 37
Information about caller ID with
callwaiting ....................... 37
CallerIDlog...................... 38
Missed call indicator . . . . . . . . . . . . . . . . 38
Memorymatch.................... 39
Review and dial from the caller ID log . . 39

ii
Table of contents
View dialing options . . . . . . . . . . . . . . . . 40
Save a caller ID log entry to
thedirectory...................... 41
Delete the caller ID log entries . . . . . . . . 42
Caller ID log screen messages. . . . . . . . 42
Answering system settings. . . . . . 43
Answering system . . . . . . . . . . . . . . . . . 43
Announcement.................... 43
Record your own announcement . . . . . . 43
Play the announcement . . . . . . . . . . . . . 44
Delete your announcement . . . . . . . . . . 44
Answeron/off..................... 45
Callscreening..................... 46
Numberofrings................... 46
Remote access code . . . . . . . . . . . . . . . 47
Message alert tone. . . . . . . . . . . . . . . . . 47
Recordingtime.................... 48
Answering system operation . . . . 49
Answering system and voicemail . . . . . . 49
Using the answering system and
voicemail together . . . . . . . . . . . . . . . . . 49
Message capacity. . . . . . . . . . . . . . . . . . 50
New message indication. . . . . . . . . . . . . 50
Callscreening..................... 51
Callintercept...................... 51
Message playback . . . . . . . . . . . . . . . . . 52
Delete all messages . . . . . . . . . . . . . . . . 53
Record, play or delete memos . . . . . . . . 53
Message window displays . . . . . . . . . . . 54
Remoteaccess.................... 55
Appendix.....................56
Expand your telephone system . . . . . . . 56
Add and register a handset . . . . . . . . . . 56
Replace a handset . . . . . . . . . . . . . . . . . 57
Screenmessages.................. 58
Handset and telephone base indicators . . .60
Battery .......................... 61
Troubleshooting . . . . . . . . . . . . . . . . . . . 62
Important safety instructions . . . . . . . . . 70
Precautions for users of implanted
cardiac pacemakers . . . . . . . . . . . . . . . . 71
Operatingrange................... 71
ECOmode....................... 71
FCC, ACTA and IC regulations . . . . . . . . 72
California Energy Commission battery
charging testing instructions. . . . . . . . . . 74
For C-UL compliance only . . . . . . . . . . . 75
Maintenance...................... 77
About cordless telephones . . . . . . . . . . . 78
The RBRC®seal................... 78
Limitedwarranty................... 79
Technical specifications . . . . . . . . . . . . . 81
Index ........................82

1
Parts checklist
Your telephone contains the following items. Save your sales receipt and original
packaging in the event warranty service is necessary.
Getting started
Abridged user’s manual
Telephone
line cord
Battery compartment cover
(1 for CS6729)
(2 for CS6729-2/CS6729-21)
(3 for CS6729-3)
(4 for CS6729-4/CS6729-4D)
(5 for CS6729-5)
Battery
(1 for CS6729)
(2 for CS6729-2/
CS6729-21)
(3 for CS6729-3)
(4 for CS6729-4/
CS6729-4D)
(5 for CS6729-5)
Telephone base
power adapter Wall mount bracket
Charger and
charger adapter
(1 for CS6729-2/
CS6729-21)
(2 for CS6729-3)
(3 for CS6729-4/
CS6729-4D)
(4 for CS6729-5)
Telephone base
Handset
(1 for CS6729)
(2 for CS6729-2/
CS6729-21)
(3 for CS6729-3)
(4 for CS6729-4/
CS6729-4D)
(5 for CS6729-5)
To purchase a replacement battery or power adapter, visit our website at
www.vtechphones.com or call 1 [phone]. In Canada, go to
www.vtechcanada.com or call 1 [phone].
Abridged user’s manual
Battery Pack/ Bloc-piles : (2.4VNi-MH) WARNING/ AVERTISSEMENT : DONOT BURN OR PUNCTURE BATTERIES. NEPAS INCINÉRER OU PERCER LES PILES. Madein China / Fabriqué en chine
THISSIDE UP / CE CÔTÉVERS LE HAUT

2
Getting started
Telephone base and charger installation
Install the telephone base and charger as shown below.
If you subscribe to digital subscriber line (DSL) high-speed Internet service through
your telephone line, make sure you install a DSL filter (not included) between the
telephone line cord and telephone wall jack. Contact your DSL service provider for
more information.
Use only the power adapters supplied with this product.To order a replacement, visit
our website at www.vtechphones.com or call 1 [phone]. In Canada, go to
www.vtechcanada.com or call 1 [phone].
The power adapters are intended to be correctly oriented in a vertical or floor mount
position.The prongs are not designed to hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
•
•
Telephone base Charger
Telephone line cord
Telephone wall jack
A DSL filter (not
included) is required
if you have DSL
high-speed Internet
service.
The DSL filter must
be plugged into the
telephone wall jack.
CAUTION:
If you subscribe to telephone service from a cable company or a VoIP service
provider, contact your cable/VoIP service provider for more information.
Electrical outlet
(not controlled
by a wall switch)
Charger
adapter
Electrical outlet
(not controlled
by a wall switch)
Telephone
base power
adapter

3
Getting started
Place the battery with the label
THIS SIDE UP facing up and
the wires inside the battery
compartment.
2.Plug the battery connector securely
into the socket, matching the
orientation of the engraved label.
1.
Slide the battery compartment cover
towards the center of the handset
until it clicks into place.
3. Place the handset in the telephone
base or charger to charge.
4.
Battery installation
Install the battery as shown below.
If the handset will not be used for a long period of time, disconnect and remove the
battery to prevent any possible leakage.
To purchase replacement batteries, visit our website at www.vtechphones.com
or call 1 [phone]. In Canada, go to www.vtechcanada.com or
call 1 [phone].
•
•
IMPORTANT:
Check for a dial tone by pressing . If you hear a dial tone, the installation is successful.
If you do not hear a dial tone:
Make sure the installation procedures described above are properly done.
It may be a wiring problem. If you have changed your telephone service to
digital service from a cable company or a VoIP service provider, the telephone line
may need to be rewired to allow all existing telephone jacks to work. Contact your
cable/VoIP service provider for more information.
•
•
CHARGE light
remains on
when charging.
Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING/ AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PASINCINÉRER OU PERCER LES PILES.
Made in China / Fabriquéen chine
THISSIDE UP / CE CÔTÉVERS LE HAUT
Battery Pack / Bloc-piles : (2.4V Ni-MH) WARNING/ AVERTISSEMENT : DO NOT BURN OR PUNCTURE BATTERIES. NE PASINCINÉRER OU PERCER LES PILES. Made in China / Fabriquéen chine
THISSIDE UP / CE CÔTÉVERS LE HAUT

4
Getting started
Battery charging
Once you have installed the battery, the screen indicates the battery status
(see the table below). If necessary, place the handset in the telephone base or charger
to charge the battery. For best performance, keep the handset in the telephone base
or charger when not in use. The battery is fully charged after 11 hours of continuous
charging. See the table on page 61 for battery operating times.
If the screen is blank or displays Put in charger, you need to charge the handset
without interruption for at least 30 minutes to give the handset enough charge to use
for a short time. When the battery is low, the handset displays Low battery along
with a flashing icon. If you are on a call in low battery mode, the handset plays short
beeps to alert you.
The following table summarizes the battery charge indicators and actions to take.
Battery indicators Battery status Action
The screen is blank, or
displays Put in charger and
flashes.
The battery has no or very
little charge. The handset
cannot be used.
Charge without interruption
(at least 30 minutes).
The screen displays
Low battery and
flashes.
The battery has enough
charge to be used for a short
time.
Charge without interruption
(about 30 minutes).
The screen displays
HANDSET X.The battery is charged. To keep the battery charged, place it in the telephone
base or charger when not
in use.
If you place the handset in the telephone base or charger without plugging in a battery,
the screen displays No battery.
After you install your telephone or power returns following a power
outage, the handset will prompt you to set the date and time.
For instructions, see Set date and time on page 14. To skip setting,
press CANCEL.ECO
Date: MM/DD/YY
ANS ON

5
Getting started
Installation options
The telephone comes ready for tabletop use. If you want to mount your telephone
on a wall, use the provided wall mount bracket to connect with a standard
dual-stud telephone wall mount plate. If you do not have this wall mount plate, you can
purchase one from many hardware or consumer electronics retailers.You may need a
professional to install the wall mount plate.
Tabletop to wall mount installation
Remove the telephone line cord
from the telephone wall jack, and the
telephone base power adapter from
the electrical outlet.
1.
Align the holes on the bracket with
the standard wall plate and slide the
bracket down until it locks securely.
3. Plug the telephone line cord into the
telephone wall jack. Plug the power cord
into an electrical outlet not controlled by
a wall switch. Bundle the telephone line
cord and power adapter cord neatly with
twist ties.
4.
Position the telephone base against the
wall mount bracket with the extended
tabs marked Bon top. Insert the
extended tabs on the wall mount bracket
into the slots marked Bon the back of
the telephone base. Push the telephone
base down until it clicks securely.
2.
B
B
B
B

6
Getting started
Wall mount to tabletop installation
If the telephone line cord and power adapter cord are bundled, untie them first.
Slide the wall mount bracket up and remove it from the wall mount plate. Unplug the
telephone line cord (or DSL filter) from the telephone wall jack. Unplug the power
adapter from the power outlet.
Slide the telephone base up and remove it from the wall mount bracket.
See Telephone base and charger installation on page 2.
1.
2.
3.
4.

7
Getting started
Are you a new cable or VoIP subscriber?
If your answer is yes, the existing telephone jacks in your home may no longer work.
Your cable/VoIP service provider uses a different connection, separate from your old
traditional telephone service, to connect the modem/router/terminal adapter installed in
your home.
To allow all existing telephone jacks to work, contact your telephone service provider
for solutions, such as rewiring services (fees may apply).
If your answer is no, your existing telephone jacks will continue to work as normal.
Did you subscribe to voicemail service from your telephone
service provider?
Your telephone has a built-in answering system and supports voicemail feature offered
by your telephone service provider (subscription is required, and fees may apply).
Refer to Answering system and voicemail on page 49 for more information.
To use the built-in answering system:
You may see this online Complete user’s manual on how to record your outgoing
announcement, retrieve messages and other related operations.You may also refer to
the Abridged user’s manual in the product package for abbreviated instructions.
To use the voicemail:
To retrieve your voicemail messages, you typically dial an access number provided
by your telephone service provider, and then enter a security code. Contact your
telephone service provider for instructions on how to configure the voicemail settings
and listen to messages.
Cable or
Internet
NEW
Main
landline
OLD
Modem/Router/
Terminal adapter
Conventional
telephone line jack

8
Getting started
X/DELETE
Press to delete the playing message (page 52).
When the phone is not in use, press twice to delete
all previously reviewed messages (page 53).
Message window
Shows the number of messages, and other
information of the answering system or
telephone base (page 54).
/PLAY/STOP
Press to play messages (page 52).
Press to stop message playback (page 52).
/SKIP
Press to skip to the next message (page 52).
/REPEAT
Press to repeat the playing message (page 52).
Press twice to play the previous message (page 52).
•
•
•
•
•
•
•
•
IN USE light
Flashes when there is an incoming call, or another
telephone sharing the same line is in use.
Flashes when handsets are being deregistered.
On when a handset is in use.
On when the answering system is answering a call.
On when a handset is being registered.
ANS ON/OFF
Press to turn the answering system on or off
(page 45).
VOL+ and VOL-
Press to adjust the volume during message
playback (page 52).
When the phone is not in use, press to adjust the
telephone base ringer volume (page 12).
FIND HANDSET
Press to page all system handsets (page 25).
•
•
•
•
•
•
•
•
•

9
Getting started
Handset layout
/ / VOLUME
Press to review the directory when the phone is not in use
(page 32).
Press to increase the listening volume during a call or message
playback (page 21 or page 52).
Press to scroll up while in a menu, or reviewing the directory,
caller ID log or redial list.
Press to move the cursor to the right while entering numbers or
names in the directory.
•
•
•
•
REDIAL/PAUSE
Press repeatedly to review the last 10 numbers dialed
(page 22).
Press and hold to insert a dialing pause while dialing or entering
numbers (page 20 or page 30).
•
•
/FLASH
Press to make or answer a call (page 20).
Press to answer an incoming call when you receive a call
waiting alert during a call (page 21).
•
•
OFF/CANCEL
Press to hang up during a call (page 20).
Press to silence the ringer temporarily while the handset is
ringing (page 21).
Press and hold to erase the missed call indicator when the
phone is not in use (page 38).
Press to return to the previous menu, or press and hold to
return to idle mode, while in a menu without making changes.
•
•
•
•
MENU/SELECT
Press to show the menu (page 11).
Press to choose an item, or save an entry or setting while in
a menu.
•
•
CID/ /VOLUME
Press to review the caller ID log when the phone is not in use
(page 39).
Press to decrease the listening volume during a call or message
playback (page 21 or page 52).
Press to scroll down while in a menu, or reviewing the directory,
caller ID log or redial list.
Press to move the cursor to the left while entering numbers or
names in the directory.
•
•
•
•

10
Getting started
1
Press repeatedly to add or remove 1 in front of the caller ID log
entry before dialing or saving it to the directory while reviewingwhile reviewing
a caller ID log entry ((page 40).
Press and hold to set or dial your voicemail number (page 16
and page 23).
•
•
Dialing keys
Press to enter numbers or characters.
Press to answer an incoming call (page 20).
•
•
Press to make or answer a call using the handset speakphone
(page 20).
Press to switch between the handset speakerphone and the
handset earpiece during a call (page 20).
•
•
TONE
Press to switch to tone dialing temporarily when using pulse
service while on a call (page 22).
•
Handset layout
MUTE/DELETE
Press to mute the microphone while on a call (page 21).
Press to delete digits or characters while using the dialing keys
(page 20 or page 30).
Press to silence the ringer temporarily while the handset is
ringing (page 21).
Press to delete the displayed entry when reviewing the
directory, caller ID log or redial list (page 33, page 42 or
page 22).
•
•
•
•
QUIET#
Press and hold to set and turn on the quiet mode, or turn it off
(page 13).
Press repeatedly to show other dialing options when reviewing
a caller ID log entry (page 40).
•
•
INT
Press to start an intercom conversation or transfer a call
(for multi-handset models only) (page 27).
•
CHARGE light
On when the handset is charging in the telephone base or
charger (page 3).
•

11
Using the menu
You can use a cordless handset to change the telephone settings.
In the ringers menu, you can select the ringer tones and adjust the ringer volume for
incoming calls.
In the settings menu, you can change the settings for LCD language, voicemail
number, voicemail indicators, key tone, home area code and dial mode.
Go to Answering system settings (from page 43 to page 48) for instructions to
change the answering system settings.
To enter the handset menu:
Press MENU when the phone is not in use.
Press or until the handset displays the desired
feature menu.
Press SELECT to enter that menu.
To return to the previous menu, press CANCEL.
To return to idle mode, press and hold CANCEL.
Handset ringer volume
You can adjust the ringer volume or turn the ringer off on each handset. When the
ringer is turned off, the handset displays and Ringer off.
Press MENU when the handset is not in use.
Press or until the handset displays Ringers,
then pressress SELECT.
The handset displays Ringer volume, then press
SELECT again.
Press or to sample each ringer volume level.
Press SELECT to save your selection. You hear a
confirmation tone.
The ringer volume also determines the ringer volume for intercom
calls. If the ringer volume is set to off, that handset is silenced for
all incoming calls except paging tone.
1.
2.
3.
•
•
1.
2.
3.
4.
5.
Telephone settings
ECO
Volume:
ECO
Ringer volume
ECO
Ringers

12
Telephone settings
Telephone base ringer volume
Press VOL+or VOL-on the telephone base to adjust the
ringer volume when the phone is not in use.
When you set the ringer volume to zero, the base ringer is off
and the telephone base announces, “ Base ringer is off.”
Ringer tone
You can choose from different ringer tones on each handset.
Press MENU when the handset is not in use.
Press or until the handset displays Ringers,
then press SELECT.
Press or until the handset displays Ringer tone,
then press SELECT.
The handset displays Tone: with the current setting displayed.
Press or to sample each ringer tone.
Press SELECT to save your selection. You hear a
confirmation tone.
If you turn off the ringer volume, you will not hear ringer
tone samples.
1.
2.
3.
4.
5. ECO
Ringer tone
ECO
Ringers
ECO
Tone: 1

13
Telephone settings
Quiet mode
You can turn on the quiet mode for a period of time (1-12 hours). During this period,
all tones (except paging tone) and call screening are muted.
When you turn on the quiet mode, the answering system turns on automatically. When
the quiet mode duration expires, the answering system remains on.
To set the duration and turn on the quiet mode:
Press and hold QUIET#when the handset is not in use.
The handset displays Quiet: _ _ hours. Use the dialing
keys (0-9) to enter the desired duration (1-12).
Press SELECT to save. You hear a confirmation tone.
The handset displays Quiet mode on, ANS ON and .
The ANS ON/OFF light on the telephone base turns on.
To turn off the quiet mode:
Press and hold QUIET#when the handset is not in use.The
handset displays Quiet mode off briefly and then returns to idle.
When you change the settings of the ringer tone, handset ringer
volume or telephone base ringer volume, you can still hear the
samples even if the quiet mode is on.
1.
2.
3.
•
ECO
Quiet mode off
ANS ON
10:15 PM 12/18
Quiet mode on
ECO
ANS ON
10:15 PM 12/18
ECO
Quiet: _ _ hours
[1-12]

14
Telephone settings
Set date and time
The answering system announces the date and time of each message prior to
playing it. Before using the answering system, set the date and time as follows. If you
subscribe to caller ID service, the day, month and time are set automatically with each
incoming call. However, the year must be correct so that the day of the week can be
calculated from the caller ID information.
Press MENU when the handset is not in use.
Press or until the handset displays Set date/time,
then press SELECT.
Press or to select the month then press SELECT,
or use the dialing keys to enter a two-digit number (01-12).
Press or to select the date then press SELECT,
or use the dialing keys to enter a two-digit number (01-31).
Press or to select the year then press SELECT,
or use the dialing keys to enter a two-digit number (00-99) then
press SELECT.
Press or to select the hour then press SELECT,
or use the dialing keys to enter a two-digit number (01-12).
Press or to select the minute then press SELECT,
or use the dialing keys to enter a two-digit number (00-59).
Press or to select AM or PM.
Press SELECT to save the settings. You hear a confirmation tone.
If the date and time are not set when a message is recorded, the system announces,
“Time and date not set,” before each message plays.
The phone plays two beeps if you enter an invalid number.
1.
2.
3.
4.
5.
6.
7.
8.
9.
•
•
Set date/time
ECO
Date: MM/DD/YY
ECO
Time: HH:MM --
ECO

15
Telephone settings
LCD language
You can select English, French or Spanish to be used in all screen displays.
Press MENU when the handset is not in use.
Press or until the handset displays Settings,
then press SELECT.
Press SELECT to choose LCD language.
Press or to choose English, Français or Español,
then press SELECT.
The screen displays Set English? when you
choose English.
The screen displays Set Francais? when you
choose Français.
The screen displays Set Espanol? when you
choose Español.
5. Press SELECT to save your selection. You hear a
confirmation tone.
If you accidentally change the LCD language to French or Spanish,
you can reset it to English easily by pressing MENU then entering 364#.
1.
2.
3.
4.
•
•
•
Settings
English
LCD language
ECO
ECO
ECO

16
Telephone settings
Voicemail number
If you subscribe to voicemail service offered by your telephone service provider,
you can save the voicemail number to 1on each handset for easy access. When
you want to retrieve voicemail messages, press and hold 1. Contact your telephone
service provider for more information and assistance about using your voicemail
service.
To set your voicemail number:
Press and hold 1when the phone is not in use.
Use the dialing keys to enter the voicemail number
(up to 30 digits).
Press or to move the cursor to the left or right.
Press DELETE to erase a digit.
Press and hold DELETE to erase all digits.
Press and hold PAUSE to insert a dialing pause
(a Pappears).
3. Press SELECT to save. Then the handset dials the saved voicemail number.
-OR-
Press MENU when the handset is not in use.
Press or to scroll to Settings, then press SELECT.
Press or to scroll to Voicemail #, then press SELECT.
Use the dialing keys to enter the voicemail number
(up to 30 digits).
Press or to move the cursor to the left or right.
Press DELETE to erase a digit.
Press and hold DELETE to erase all digits.
Press and hold PAUSE to insert a dialing pause
(a Pappears).
5. Press SELECT to save. The handset displays VM # saved
and the stored number. You hear a confirmation tone.
1.
2.
•
•
•
•
1.
2.
3.
4.
•
•
•
•
Settings
Voicemail #
Voicemail #
_
ECO
ECO
ECO