V-tech Smart Home-Phone User manual

Cincinnati Bell
Smart Home-Phone
Additional Handset
Set Up Guide
Please read this entire guide before beginning setup.
Additional Information can be found at cincinnatibell.com/smarthomephone.

Step 1:• Press and hold the FIND HANDSET button on the
telephone base for at least 10 seconds. The VMWI and LINE
IN USE lights will blink to conrm that the telephone base is
in registration mode.
Step 2:• At the Home screen, press and hold the OFF button.
Step 3:• At the Info screen, press MENU.
Step 4:• Press the up/down NavKey to highlight Phone
Conguration, then press SEL.
Step 5:• Press the up/down NavKey to highlight
Registration, then press SEL.
Step 6• : Press the up/down NavKey to highlight Handset
Settings, then press SEL.
Step 7:• Press the up/down NavKey to highlight Register to
Base, then press SEL.
Step 8:• Press the up/down NavKey to highlight the
base you want, then press SEL. The handset will display
SEARCHING while it searches for the telephone base.
If the search is successful, a code from the telephone base
will be displayed. To register the handset to the base, press
REGISTER.
Step 9:• In the Enter PIN Box, enter the system PIN, then
press APPLY. (The default PIN is 0000, unless you have
changed it. The PIN digits you enter will appear as **** in
the box.)
Step 10:• A conrmation screen will be displayed briey,
then the screen will return to the registration settings
menu.
Press OFF to return to the HOME screen.
Additional Handset Setup
Additional Handset Setup