V-tech MI6821 - Cordless Telephone With Caller Id User manual

USER’S MANUAL

IMPORTANTSAFETYINSTRUCTIONS....................................................................1
Introduction...........................................................................................................2
PartsCheckList...................................................................................................3
TheHandsetLayout.............................................................................................4
TheBaseUnitLayout.........................................................................................5
GETTINGSTARTED....................................................................................................6
SETUP.....................................................................................................................6
ConnectingpowertoBase Unit........................................................................6
InstallationofBattery...........................................................................................6
ChargingoftheHandsetBattery......................................................................7
ConnectingtoPhone Line................................................................................7
CheckingforDial Tone......................................................................................7
WallMounting......................................................................................................9
BASICOPERATION...................................................................................................10
Handsetand BaseIndicators......................................................................10
HandsetIcons...................................................................................................10
HandsetLED......................................................................................................10
BaseLEDs..........................................................................................................10
HandsetOperation...............................................................................................11
MakingCalls......................................................................................................11
AnsweringCalls.................................................................................................11
SpeakerphoneOperation................................................................................11
FlashFunction....................................................................................................11
RedialFuntion.....................................................................................................11
Temporaryringeradjustments.......................................................................12
MuteFunction....................................................................................................12
IntercomCall......................................................................................................12
CallForward......................................................................................................13
CallTransfer......................................................................................................13
ConferenceCall.................................................................................................13
BaseOperation.................................................................................................13
PhonebookOperation.........................................................................................14
StoringaNewEntry..........................................................................................14
Reviewing/DialingfromthePhonebook.......................................................15
EditingaPhonebookentry.............................................................................15
DeleteaPhonebookentry..............................................................................16
EditingaPhonebookEntry..............................................................................16
CallsLog(CallerID -CallWaiting)..................................................................17
CallerID-CallWaitingID..................................................................................17
ReviewingCallerID..........................................................................................17
StoringaCallerID............................................................................................18
DialingfromCallerID.......................................................................................18
DeletingCallerID.............................................................................................19
HandsetSettings.................................................................................................20
Table Of Contents

RingerVolume..................................................................................................20
RingerTone.......................................................................................................20
KeyTone(presettoON)...................................................................................20
Language(presettoEnglish).........................................................................21
MessageWaiting...............................................................................................21
ClearMessagewaiting....................................................................................21
DialType(presettoTone)...............................................................................21
ADVANCEDOPERATION........................................................................................23
HEADSETOPERATION....................................................................................23
ADDITIONALINFORMATION..................................................................................24
Maintenance....................................................................................................24
InCaseOfDifficulty.............................................................................................25
WarrantyStatement............................................................................................27
FCC,ACTA,andICRegulations......................................................................29
Table Of Contents

Congratulationsonyourpurchase
of this VTech product
NEED HELP?
Ourrepresentativesarehere
to help you with any questions
concerning the operation of this
product,availableaccessories,
or any other related issues.
Call Toll Free:
1-800-595-9511
In Canada, Call:
1-800-267-7377
or visit our website at
www. vtechphones. com

When using your telephone equipment, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and injury, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water (for example, near a bath tub, kitchen sink or
swimming pool).
5. Do not place this product on an unstable surface, such as a table, shelf or stand.
The product may fall, causing serious damage.
6. Slots and openings in the back or bottom of the base unit and handset are provided
for ventilation. To protect them from overheating, these openings must not be
blocked by placing the product on a soft surface such as a bed, sofa or rug. This
product should never be placed near or over a radiator or heat register. This product
should not be placed in any area where proper ventilation is not provided.
7. This product should be operated only from the type of power source indicated on
the marking label. If you are not sure of the type of power supply in your home, consult
your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not install this product where
the cord may have anyone walking on it.
9. Never push objects of any kind into this product through slots in the base or handset
as they may touch dangerous voltage points or short out parts that could result in
a risk of fire or electric shock. Never spill liquid of any kind on the product.
10. To reduce the risk of electric shock, do not disassemble this product, but take it to
an authorized service facility. Opening or removing parts of the base or handset
other than specified access doors may expose you to dangerous voltages or other
risks. Incorrect reassembling can cause electric shock when the product is
subsequently used.
11. Do not overload wall outlets and extension cords as this can result in the risk of fire
or electric shock.
12. Unplug this product from the wall outlet and refer servicing to an authorized service
facility under the following conditions:
A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled onto the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions, as
improper adjustment of other controls may result in damage and often requires
extensive work by an authorized technician to restore the product to normal
operation.
E. If the product has been dropped and the base and/or handset has been
damaged.
F. If the product exhibits a distinct change in performance.
13. Avoid using a telephone (other than cordless) during an electrical storm. There
is a remote risk of electric shock from lightning.
14. Do not use the telephone to report a gas leak in the vicinity of the leak.
15. Only put the handset of your telephone next to your ear when it is in normal talk
mode.
Important Safety Instructions
1

Important Safety Instructions
Introduction
The mi 6821 is an advanced cordless telephone set, capable of supporting four hand-
sets.
This manual is designed to familiarize you with this cordless telephone. We strongly
recommend you read the manual before using your phone.
VTECH COMMUNICATIONS INC. CustomerService: 1-800-595-9511.In Canada, call
VTechTelecommunicationsCanadaLtd.at1-800-267-7377.
BEFORE USING YOUR mi 6821 SYSTEM, CAREFULLY PEEL OFF THE
PROTECTIVE FILM COVERING THE DISPLAYS.
2

Parts Check List
To purchase replacement batteries, visit us on the web at www.vtechphones.com or call
VTech Communications, Inc. at 1-800-595-9511. In Canada, call VTech Telecommunica-
tions Canada Ltd. at 1-800-267-7377.
NOTE: Use only VTech batteries (part number 89-1323-00-00).
5. Telephone Line Cord
6. Belt Clip
7. User’s Manual
8. Battery
1. Handset
2. Base Unit
3. Base Wall Mounting Bracket
4. Base Power Adapter
3

1. Earpiece
2. LCD Display
3. Headset Jack (2.5mm)
4. CID (Scroll Down)
5. Phone (Flash)
6. Dialing Keys (0-9, *, #)
7. Redial (Pause)
The Handset Layout
8. Select (Menu)
9. Phonebook (Scroll Up)
10. Speakerphone
11. Off (Clear)
12. Volume Control
13. Intercom
14. Mute (Delete)
1
2
4
5
6
8
7
10
12
13
9
11
3
14
4

1. Page Key
2. Charging LED
3. In Use LED
4. Message Waiting LED
5. Connector Jack
6. Telephone Jack
The Base Unit Layout
3
4
1
2
56
5

Connecting power to Base Unit
Plug the power adapter into an electrical outlet, and the connector into the connector
jack at the bottom of the base unit.
Setup
Getting Started
Installation of Battery
1. Remove battery compartment cover by
pressing on the indentation and sliding
downward.
2. Align the two holes in the plug with the
socket pins, then snap the plug into place.
Place the battery in the compartment with
the wires in the upper right corner.
3. Replace the battery cover by sliding it
upwards.
4. If the new battery is not already charged,
place the handset in its base unit and
allow it to charge for 10-12 hours.After that,
be sure to place the handset in its base
when not in use to insure maximum daily
performance. After the initial charge,a
maintenance charge of 8 hours should be
sufficient.
5. Average talk time on a fully charged battery
is about nine hours, standby time is
aproximately four days.
CAUTION: Use only the VTech power supply provided with your tele-
phone.
6

Setup
Charging of the Handset Battery
The handset of your cordless telephone is powered by
rechargeable battery. It charges automatically whenever
the handset is in its base unit.
You should charge the batteries for 10-12 hours when
you first receive your phone. You will know the battery
needs charging when:
• The low battery message is displayed:
• The handset seems completely dead, the LCD is completely clear and does not
activate when you press the keys.
IMPORTANT:
1. Do not dispose of batteries in a fire, they might explode.
2. Do not open or mutilate the batteries. Toxic substances may be released, causing
harm to eyes or skin.
3. Exercise care in handling batteries in order to prevent an accidental short of the
charge contacts, potentially causing the batteries to overheat.
4. Do not dispose of these batteries into household garbage, they should be properly
recycled.
5. Do not charge the batteries with other electrical devices.
6. If the phone will not be used for a long period of time, remove the battery to prevent
possible leakage.
Connecting to Phone Line
Plug one end of the telephone line cord into the jack on the back of the base unit. Then
plug the other end of this cord into the wall jack. Before connecting to phone line, be sure
to charge the battery for at least 12 hours.
Checking for Dial Tone
After the battery is charged, press PHONE on the handset. The LCD displays PHONE
and shows a call timer, and you will hear a dial tone. If not, see In Case of Difficulty.
Getting Started
7

Setup
IMPORTANT! FOR MAXIMUM PERFOR-
MANCE OF YOUR CORDLESS TELEPHONE
SYSTEM:
1. Choose a central location for your base unit.
2. Install your base unit and extension hand-
sets away from electronic equipment, such
as personal computers, television sets and
microwave ovens.
3. In locationswherethereare multiplecordless
telephones, separate the base units as far
away as possible.
4. Install your telephone equipment away from
heat sources and sunlight.
5. Avoid excessive moisture, dust or extreme
cold.
Getting Started
8

Wall Mounting
The wall mount bracket is designed for use on standard wall mount plates only. Wall
mounting is optional.
1. Plug the adapter into an electrical outlet, and the connector to the bottom of the
base unit.
2. Connect the telephone line cord to the jack at the bottom of the base unit, and the
other end to the wall jack.
3. Line up the tabs on the wall mount adapters with the holes at the bottom of the base
unit. Snap the wall mount bracket firmly in place.
4. Mount the base unit on the wall. Position the base unit so the mounting studs will fit into
the holes on the wall mount bracket. Slide base unit down on the mounting studs until
it locks into place.
Getting Started
9

Handset and Base Indicators
Basic Operation
• Turns on when the microphone is muted.
• Turns on when there are new call log enteries.
• Turns on when the ringer is muted.
• Low battery indicator and charging indicator
• On when the phone is off hook.
• Flashes when an extension phone is off hook.
• On when the handset is charging in the base.
• Flashes when the visual message waiting signal has been detected.
Service must be subscribed through your local telephone company.
IN USE
CHARGING
MESSAGE
WAITING
BaseLEDs
LED Description
HandsetIcons
Icon Description
MUTE
NEW
• LED is on when in handsfree mode.
HandsetLED
LED Description
10

Basic Operation
Handset Operation
Making Calls
• Press PHONE (or, SPK to use the handset speaker-
phone feature). Dial the phone number.
-OR-
• Dial the phone number first. If make a mistake,
press DELETE or CLEAR to clear it .If you desire,
press and hold PAUSE to add pauses. Then press
PHONE (or SPK).
• Press OFF or place the handset in the base to end
your call.
Answering Calls
• Press PHONE, SPK, or any dial pad keys.
• Press OFF or place the handset in the base to end
your call.
Speakerphone Operation
Your mi 6821 handset has a built-in handsfree speaker-
phone. This feature allows you to stand the handset up
right on a table or desktop and have handsfree conver-
sations. During a call you can press SPK to change to a
handsfree conversation from normal handset use. Press
OFF or place the handset in the base to hang up.
Adjusting Handset Volume (alsoappliestothehand-
set speakerphone and headset)
The volume control is on the right edge of the handset.
During a call, press VOL + or - key to adjust the listening
volume to a comfortable level. When you reach the maxi-
mum or minimum setting, a double-beep will sound.
Flash Function
You can use your mi 6821 with services such as call
waiting. When you receive a call waiting signal, simply
press the FLASH key to switch to the new call. Press
FLASH again to switch back to the original call.
NOTE: Use FLASH to access other phone company
subscriber services, as described by your provider.
Redial Function
• Press REDIAL to display the last telephone number
dialed from the handset (up to 32 digits). Use or
to scroll through the five previously dialed numbers.
When the beginning or the end of the redial list is
reached, a double beep will sound.
• When the desired number is reached, press PHONE
11

Basic Operation
Mute Function
• During an active call, press the MUTE key
to disable the microphone. The screen will
display:
• Press MUTE again to return to normal two way
conversation. MICROPHONE ONwill dis-
play briefly.
Intercom Call
If you have registered accessory handsets (model
mi 6820) to your mi 6821 base, you can intercom
between system handsets.
• From the idle (off) mode, press INT. The first
handset (HS1) will display:
• Select a number of the handset to be called.
The display will change to (X is handset num-
ber):
• Press INT or PHONE or SPK on handset X to
answer the intercom call. The screens will dis
play:
Handset Operation
or SPK to dial.
• Press OFF to exit the redial review list.
NOTE: When redial memory is empty, and REDIAL is pressed, a double beep will sound. When
the desired entry displays, press DELETE to delete it. You’ll hear a confirmation beep.
Temporary ringer adjustments
When handset is ringing, to silence the handset's ringer, press OFF or MUTE, or adjust
the ringer level to level 0 by using the handset volume keys.
This adjustment is temporary, and only last for the current ringing call. The ringer volume
will return to it's normal setting once the call is answered, or the ringing stops.
• Press INT or OFF on either handset to end
the call.
12

Basic Operation
Conference Call
If you have registered accessory handsets
(model mi 6820) to your mi 6821 base, you can
have conference calls between system handsets.
It is possible to establish a conference between
any two handsets and the external line.
If a handset already has a connection to the ex-
ternal line, and any other handset goes off-hook,
a conference is immediately established. Both
handsets will show:
Base Operation
From the base unit, press PAGE to locate the
handsets.
• When the handset is in idle, press PAGE. The
handsets will beep and display:
• To end the page, press PHONE, SPK, or any
dial pad key (0-9, *, #) at the handset, or press
PAGE at the base.
• A handset (HS1), on an external call can for-
ward it to any other handset .
• Press the INT key on HS1, it will display:
• Enter the handset number you wish to for-
ward to. HS1 will display:
• HS2 can press PHONE to answer the call.
NOTE:IfHS2doesnotrespond inabout oneminute
the external call will be returned to HS1 and the
display will show:
If the returned call is not answered within one
minute, the external call will end automatically.
Handset Operation
NOTE: If HSX is out of range, or on an external call,
when HS1 attempts to intercom it, the display of
HS1 will show:
Call Forward
If you have registered accessory handsets (model mi 6820) to your base, you can
forward calls between system handsets. An external call can be forwarded from one
handset (HS1) to any other handset.
13

Basic Operation
Phonebook Operation
Your mi 6821 can store up to 50 numbers with names in memory. Each memory location
can hold up to 32 digits for the number and 16 characters for the name.
NOTE: If you register additional handsets to your mi 6821 base, the handsets share a
common phonebook, which is stored in the base. This means that entries inserted by
one handset are available for all handsets, and if one deletes a phonebook entry, it will
disappear from all handsets.
When one handset is accessing the phonebook, the other handsets cannot access it at
the same time. If this is attempted, NOT AVAILABLE AT THIS TIME will display.
Storing a New Entry
• Press MENU.
• With PHONEBOOK highlighted, press
SEL.
• Press to selectSTORE.Press SEL.
• You will be prompted to ENTER NU-
MBER. Use the dialing keys to enter
the number you wish to store in the
phonebook. Press the DELETE key
to backspace and make corrections.
Press SEL.
• You will then be prompted to ENTER
NAME.Use the dialing keys to spell
the name. Use the and to move
the cursor. Press DELETE to back-
space and make corrections.Press
SEL.
• You’ll hear a confirmation tone, and
the new phonebook entry will be dis-
played.
NOTES:
• If the phonebook is full, the handset
will display PHONEBOOK IS FULL.
• You can also press REDIAL then
or to scroll to the previously dialed
number from the redial list you want
to store in the phonebook. Press SEL.
• While entering numbers, press and
hold PAUSE to add pauses if nece-
ssary.
• If there is a duplicate number in the
phonebook, the display will show:
>STORE
REVIEW
ENTER NUMBER
800-595-9511_
ENTER NAME
_
PHONEBOOK
IS FULL
NUMBER ALREADY
IN PHONEBOOK
14

Basic Operation
Phonebook Operation
Characters by number of key presses
Key 123456789
space 1
ABC2abc
DEF3def
GHI4ghi
JKL5jk l
MNO6mn o
PQRS7 p q r s
TUV8 t uv
WXYZ9wxyz
0
*?!/()
#',-.&
1
2
3
4
5
6
7
8
9
0
*
#
Each press of a particular key causes characters to be displayed in the following order:
Reviewing/Dialing from the Phonebook
• Press MENU. With PHONEBOOK highlighted,
press SEL. With the REVIEW highlighted,
press SEL.
- OR -
With the handset idle, press , the handset
goes directly into phonebook review mode.
• Scroll through the phonebook entries using the
and keys or enter first character of the
name to be searched (using the digit keys)
and continue navigating using the or as
scroll keys, until you reach the entry to be
dialed.
NOTE: When reviewing the phonebook, the se-
cond line of the display will show the phone nu-
mber, up to 16 digits. For numbers longer than
16 digits, only the first 13 digits will be shown.
Press or #to scroll the phone number to
see the additional digits.
• Press PHONE or SPK, to dial the number.
NOTE: If there are no entries in the phonebook,
when it is accessed, PHONEBOOK IS EMPTY will
display.
VTech
595-9511
VTech Com
800-595-9511
PHONE 00:00:10
VTech Com
15

Basic Operation
Phonebook Operation
Editing a Phonebook Entry
• Follow the first two steps in Reviewing/
Dialing from the Phonebook (page 15) to
reach the entry to be edited.
• Press SEL.
• Press DELETE to backspace then enter the
correct number. Press and hold PAUSE to
add pauses if necessary.You can also press
REDIAL, then or to scroll to the
previously dialed number from redial list you
want to store in the phonebook. Press SEL.
• Press SEL to confirm.
• You are now prompted to EDIT NAME. Press
DELETE to backspace, then use the dialing
keys to enter the correct name (see page
15). Use the and to move the cursor.
• Press SEL to confirm. A confirmation tone
will sound.
Delete a Phonebook Entry
• Follow the first two steps in Reviewing/
Dialing from the Phonebook (page 15) to
reach the entry to be deleted.
• Press DELETE to delete the entry.
Aconfirmation tone willsound.
• Thehandsetwill then movetothe next entry,
if any.
EDIT NUMBER
800-595-9511_
VTech Com
800-595-9511
VTech
595-9511
VTech Com
800-595-9511
16
VTech
595-9511
EDIT NAME
VTech