V-tech TD43996974 - 5.8GHz Accessory Handset User manual

www.vtechphones.com i
Congratulations
on purchasing your new VTech product.
Before using this telephone, please read the
Important safety instructions
on page 10 of this manual.
This manual has all the feature operations and troubleshooting necessary to install
and operate your new VTech telephone. Please review this manual thoroughly to
ensure proper installation and operation of this innovative and feature rich VTech
product. For support, shopping, and everything new at VTech, visit our website at
www.vtechphones.com. In Canada, please visit www.vtechcanada.com.
The BLUETOOTH®word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by VTech Holdings
Limited is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are
those of their respective owners.
The ENERGY STAR®program (www.energystar.gov) recognizes and encourages
the use of products that save energy and help protect our environment. We are
proud to mark this product with the ENERGY STAR®label indicating it meets the
latest energy efficiency guidelines.

www.vtechphones.com ii
Table of contents
Getting started . . . . . . . . . . . . . . . . . . . . . . 1
Parts checklist . . . . . . . . . . . . . . . . . . . . . . 1
Battery installation . . . . . . . . . . . . . . . . . . . . 2
Battery charging . . . . . . . . . . . . . . . . . . . . . 3
Adding your new handset . . . . . . . . . . . . . . . . 4
Registering a handset . . . . . . . . . . . . . . . . . . 4
Replacing a handset . . . . . . . . . . . . . . . . . . . 5
Handset layout . . . . . . . . . . . . . . . . . . . . . . 6
Handset main menu . . . . . . . . . . . . . . . . . . . 7
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Important safety instructions . . . . . . . . . . . . . . 10
Troubleshooting . . . . . . . . . . . . . . . . . . . . 11
Operating range . . . . . . . . . . . . . . . . . . . . 18
Maintenance . . . . . . . . . . . . . . . . . . . . . . 18
About cordless telephones . . . . . . . . . . . . . . . 19
Warranty . . . . . . . . . . . . . . . . . . . . . . . . 19
FCC, ACTA and IC regulations . . . . . . . . . . . . . 21
The RBRC®seal . . . . . . . . . . . . . . . . . . . . 22
Technical specications . . . . . . . . . . . . . . . . 23

www.vtechphones.com 1
Getting started Basic operation
Getting started
Parts checklist
Remember to save your sales receipt and original packaging in case it is necessary to ship your
telephone for warranty service. Check to make sure the telephone package includes the following: To purchase a
replacement, visit
our website at
www.vtechphones.
com or call
1 [phone].
In Canada, go to
www.vtechcanada.
com or call
1 [phone].
•
2. Handset
6. User’s manual
5. Battery
4. Charger adapter
3. Charger1. Quick start guide

www.vtechphones.com
2
Getting started
Battery installation
Install the battery as shown below. After installing the battery, you will need to register the handset
with the telephone base. Once it is registered, you can make and receive calls.
1. Press the tab and
slide the battery
compartment cover
downwards.
2. Insert the plug as
indicated. Make sure
it is plugged securely
and matches the
color-coded label
inside the battery
compartment.
4. Align the cover at
against the battery
compartment, then
slide it upwards
until it clicks into
place.
Use only the
battery supplied
with this product or
equivalent. To order
a replacement,
visit our website at
www.vtechphones.
com or call
1 [phone].
In Canada, go to
www.vtechcanada.
com or call
1 [phone].
•
THIS SIDE UP
BatteryPack BT5632/ BT5872 3.6V550mAh Ni-MH WARNING:DO NOT BURN OR PUNCTURE BATTERIES MADEIN CHINA
THIS SIDE UP
Battery Pack BT5632 / BT5872 3.6V 550mAh Ni-MH WARNING: DO NOT BURN OR PUNCTURE BATTERIES MADE IN CHINA
THIS SIDE UP
BatteryPack BT5632/ BT5872 3.6V550mAh Ni-MH WARNING:DO NOT BURN OR PUNCTURE BATTERIES MADEIN CHINA
THIS SIDE UP
Battery Pack BT5632 / BT5872 3.6V 550mAh Ni-MH WARNING: DO NOT BURN OR PUNCTURE BATTERIES MADE IN CHINA
3. Place the battery
with the label
THIS SIDE UP
facing up and
the wires inside
the battery
compartment.

www.vtechphones.com 3
Getting started Basic operation
Getting started
Battery charging
For optimal performance, charge the handset battery for at least 16 hours before use.
Charge the handset by placing it in the telephone base or charger. The handset charge light will be
on when charging. Use only the power
adapter supplied
with this product or
equivalent. To order
a replacement,
visit our website at
www.vtechphones.
com or call
1 [phone].
In Canada, go to
www.vtechcanada.
com or call
1 [phone].
The power adapter
is intended to be
correctly oriented
in a vertical or oor
mount position.
•
•
Charger
Charger adapter
Charge light
Electrical outlet
not controlled by
a wall switch

www.vtechphones.com
4
Adding your new handset
Before using a newly purchased handset (LS5105), it must be registered with the telephone base. If
you already have 12 handsets registered to the telephone base and you wish to replace an existing
handset with the newly purchased one, see page 5.
Registering a handset
Before registering an additional handset, make sure that the handset battery
is installed and charged.
To register a new handset:
1. Place the unregistered handset in the telephone base.
2. Press the MENU softkey on the telephone base while in idle mode.
3. Press the UP and DOWN Navkeys to highlight Register Handset, then
press the SELECT softkey.
Registering Handset will appear on the telephone base display, then
Registration in progress... will appear on the handset display.
The registration process may take up to 90 seconds to complete.
When the registration process is complete, the telephone base and handset
will generate a conrmation tone. The newly registered handset will be
assigned the next handset registration number. For instance, if you already
have one registered handset, HANDSET 1, the next registered handset will
be HANDSET 2.
•
•
•
Getting started
12:00AM
Registration
in progress...
12:00AM
Place in
Charger
12:00AM
Register handset:
Press MENU in the
base. Find 'Register
Handset' in the Main
Menu. Press SELECT.
You must follow
the registration
process for each
handset you wish
to register to the
telephone base.
•

www.vtechphones.com 5
Getting started Basic operation
Replacing a handset
When you are replacing rather than adding a handset, you need to delete
all the handset registrations from the telephone base for the handsets to be
numbered sequentially.
To delete the registration on all handsets:
1. Press the MENU softkey on the telephone base when in idle mode to
enter the main menu.
2. Press the UP and DOWN NavKeys to select Settings, then press the
SELECT softkey to enter the Settings menu.
3. Press the UP and DOWN NavKeys to highlight Delete Handsets, then
press the SELECT softkey. The screen will show Delete Registration
of all handsets?
4. Press the YES softkey. The telephone base screen will display
[ Registration of all handsets deleted ] and the handset screen will
display Place in Charger.
After deleting the registrations of all handsets, you will need to register each
handset individually with the telephone base (see page 4 for registration
instructions).
Getting started
Settings
Voice Mail Codes
Default Settings
Delete Handsets
SELECT
Delete Handsets
NO
YES
Delete Registration
of all handsets?

www.vtechphones.com
6
Getting started
Softkeys (2)
Press to select a menu item
displayed just above the key.
HOME/FLASH
Press to make or answer a
home call.
Flashes rapidly when there israpidly when there is
an incoming home call.
Flashes slowly when a home
call is on hold.
During a home call, press to
receive an incoming call if call
waiting is activated.
(Speakerphone)
Press to activate the
handset speakerphone. The
speakerphone is on when the
is lit.
Press again to resume normal
handset use.
Charge light
On when the handset is
charging in the telephone
base.
MENU/SEL
Press to enter the main menu.
When in the main menu,
press to select, save, or set a
desired setting.
OFF/CANCEL
During a HOME or CELL line
call, press to end the call.
While in a menu, press to
cancel an operation, back up
to the previous menu, or exit
the menu display.
CELL
Press to make or answer a
cell call.
Flashes rapidly when there is
an incoming cell call.
Flashes slowly when a cell
call is on hold.
NavKeys
Press the UP, DOWN, LEFT
or RIGHT NavKeys to navigate
through the menus, highlight
items, and change settings.
Quick launch keys
When in idle mode, press one of
the NavKeys to launch a handset
feature.
• Intercom (LEFT)
• Messages (RIGHT) (for LS5145)
Voice Mail (RIGHT) (for LS5146)
Volume Control
During a call or message
playback, press to turn the volume
of the handset up or down.
• VOL (UP)
• VOL (DOWN)
Handset layout

www.vtechphones.com 7
Getting started Basic operation
Handset main menu
To enter the main menu:
1. Press MENU/SEL when the handset is in idle mode.
2. Press the UP and DOWN NavKeys to select a handset feature menu, then press MENU/SEL to enter that menu.
To return to the idle mode, press and hold OFF/CANCEL.
Messages allows you to review your
answering system messages (for LS5145
only).
PLAY DELETE
0 New Messages
10 Old Messages
Messages
Phone Book allows you to store and
search for names and numbers.
Call Log allows you to review your most
recent incoming calls.
Call Log
Phone Book
Phone Book 1
FIND NEW
Alice
Amy
Chris
Deborah
Jenny
Kristen
Call Log
OPTIONS DELETE
VTech
1-800-595-9511
Jan 9 10:39AM
HOME
Voice Mail allows you to access your
voice mail messages stored at your local
telephone company.
Voice Mail 12:00AM
Phone 0:15
OPTIONS
MUTE
*98P
Messages

www.vtechphones.com
8
Getting started
Ringers
Ringers allows you to set up ringers
for the HOME and CELL lines.
Ringer for CELL 1
Ringer for CELL 2
Record New Ringer
Ringer for HOME
Ringers
Animations allows you to choose the
animated wallpaper.
Animations
Animations
Animations
SET
Intercom allows you to page the
telephone base and other handsets.
Intercom
Global Page
BASE
HANDSET 1
Pictures allows you to choose the
wallpaper.
Pictures
Settings allows you to change your
handset settings.
Settings
Settings
Settings
Edit Handset Name
Show Handset Name
Keypad Tone
Language
LCD Contrast
Handset main menu (continued)
Pictures
SET
Intercom
Intercom