VACOM WIRELESS VS510 User manual

1
USER MANUAL
VS510
Version 0.2
VACOM WIRELESS, INC.

2
CONTENTS
IMPORTANT SAFETY INFORMATION
GETTING TO KNOW YOUR PHONE
DISPLAY INDICATORS
BATTERY INFORMATION
BASIC FUNCTIONS
1. Making Calls
2. Ending Calls
3. Answering Calls
4. Correcting Entry Errors
5. Storing Phone Numbers
6. Volume
7. Redialing Last Dialed, Received, or Missed Number
8. Speed Dial
9. Using Caller ID
10. Etiquette Mode
11. Keypad Lock
12. Silence Mode
13. Shortcut
MENUS
I. PHONEBOOK
1. Adding Entries in the Phonebook
2. Phonebook Search
3. Call List
4. Editing Groups
5. Memory Check
6. My Number

3
II. VOLUME & ALERT
1. Selecting Bell
2. Ring Type
3. Volume
4. Alert Settings
5. Beep Length
6. Roam Ringer
III. PERSONAL INFORMATION MANAGEMENT
1. Alarm
2. Schedule
3. Memo
4. Calculator
5. World Time View
6. Calendar View
IV. PHONE SETTINGS MENU
1. Wallpaper
2. Greeting Edit
3. Backlight
4. LCD Contrast
5. Languages
6. Auto Keylock
V. CALL INFORMATION
1. Call Function
2. Call Restrict
3. Call Answer
4. Call Time
5. Voice Privacy
VI. SECURITY
1. Lock Mode
2. Changing Password
3. Memory Clear
4. Initialize
5. Privacy Information

4
VII. VALUE ADDED SERVICE (VAS)
1. Data Service
2. Memory View
SHORT MESSAGING SERVICE(SMS)
BREW
1. Application Download
2. Remove an application
3. Application properties
4. System Information
USING MENU DURING CALLS
1. Phonebook Search
2. Voice Mute
3. DTMF Mute
4. Voice Privacy
5. Beep Length
6. SMS messages
ENTERING LETTERS & NUMBERS
1. Entering Letters and Numbers
2. Prediction Text Input

5
IMPORTANT SAFETY INFORMATION
Some of the following information may not apply specifically to your phone. However, as with
any electronic product, these safety precautions should be observed when using this product.
◈Please keep this manual in a safe place, for it contains important safety information and
operating instructions.
◈Please follow and adhere to all warning, safety, and operating instructions indicated on both
the phone and in this manual before use.
◈Do Not expose the phone to water or moisture.
◈Do Not expose the phone to extreme heat or cold.
◈Do Not expose the phone to open flame.
◈Do Not allow objects to fall or liquids to spill on the product.
◈Use Original Accessories only. Any damage incurred from the use of non-approved
accessories will void the warranty.
◈Use approved chargers only and connect to a power source designated on the product.
◈To reduce the risk of injury, remove the electrical cord from an outlet by pulling on the
charger, rather than the cord.
◈Ensure that the electrical cord is positioned accordingly so that it will not be vulnerable to
damage.
◈To reduce the risk of electrical shock, unplug the phone from the power source before
cleaning. Once unplugged, use a soft cloth dampened with water to clean.
◈DANGER: Do Not modify the cord or the plug. If the plug does not fit into an outlet,
have a proper outlet installed by a qualified electrician. Improper connection can result in
electrical shock.
◈Do Not attempt to disassemble the product – doing so will void the warranty. This product
does not contain consumer-serviceable components. Service should be performed only by
authorized service centers.
◈Do Not remove the antenna. A detached antenna can be a choking hazard for children.
◈Do Not place the battery inside the mouth. The battery contains toxic electrolytes that are
harmful for your health.

6
User Guide Proprietary Notice
CDMA Technology is licensed by QUALCOMM Incorporated under one of more of the
following patents:
4,901,307 5,109,390 5,267,262 5,416,797 5,506,865
5,544,196 5,657,420 5,101,501 5,267,261 5,414,796
5,504,773 5,535,239 5,600,754 5,778,338 5,228,054
5,337,338 5,710,784 5,056,109 5,568,483 5,659,569
5,490,165 5,511,073

7
GETTING TO KNOW YOUR PHONE
Volume/Scroll Key
These keys are used to set volume levels, to shot a camera and to help you
navigate through menus and the Phonebook.
Use the volume keys to:
- Adjust call volume.
- Adjust key tone volume.
- Answer incoming calls.
- Scroll through menu options.
- Scroll through the Phonebook.
Color LCD Display
The LCD screen is divided into two sections:
- The top line displays your phone status indicators.
- The lower portion displays currently in-use information, such as
Caller ID (if available), Mute, Call Waiting, etc. Menus are also
displayed in the lower portion.
Menu Keys ( / )
These keys perform several useful functions:
- Use these keys to answer incoming calls.
- Use these keys from Standby mode to briefly access Main and Select
menus.
- Use these keys to select a highlighted selection when navigating
through a menu.
SMS Key ( )
From Standby mode, press this key to access a text message menu items.
Navigation Keys
These keys allow you to navigate the phone’s various features and useful
shortcuts including BREW, phone number list, etc.
Microphone
Your typical conversational microphone. Mute the microphone during
conversation by pressing “MENU” “2”.
Mini USB Charging Port
Connect your charger here.
CLR Key
This key is used to erase incorrect numeric or character entries or to return to a
previous screen.
- To erase a single character from the screen, briefly press the CLR key
once.
- To erase the entire entry field, hold down the CLR key for one
second.
- To back up one menu level, press the CLR key once.
- To return to standby, hold the CLR key for one second.

8
END/ Key
Press this key to end calls or to return to Standby mode from any menu. Press
and hold to turn the phone On or Off.
SEND Key
This key performs several useful functions:
- Press this key to dial an entered number.
- Press this key once to redial the last outgoing number.
Numeric Keypad
These keys are used to input numbers and characters.
◀*
This key performs several useful functions:
- Toggle between ring and vibrate.
- Use as a navigation key.
#▶
This key performs several useful functions:
- Use to lock the keypad. To unlock, press MENU ( ) and “#▶”.
- Use as a navigation key.
Antenna

9
DISPLAY INDICATORS
Display indicators appear across the bottom of your phone’s LCD screen. Combination of
displayed indicators, or icons, will vary based on your phone’s operating status.
Signal Strength: This icon displays the current signal strength. Each additional
line indicates greater signal strength, where five lines indicate the maximum
signal strength.
Out of Service: This icon indicates an absence of signal and that you may be
outside the service area. If this icon is shown, calls cannot be either received or
made until a signal is found.
In Service
Roaming: This icon indicates you are “roaming” in another carrier’s service
area. However, you must register for roaming services.
In CDMA 1X network
New SMS Message: This icon indicates unchecked message(s) in your Message
Box. Press the SMS Menu key to view the Message menu or press and hold
the key to access the Voicemail Box.
SMS Message Box Full
New MMS Message : This icon indicates unchecked Multimedia message(s) in
your Message box. Press “Menu” and “3. MMS” to view the Multimedia
message menu.
MMS Message Box Full
New SMS and MMS Message
New SMS message and MMS Message Box Full
New MMS message and SMS Message Box Full
Etiquette Mode: This icon indicates that the phone will vibrate instead of ringing
when an incoming call is received. This feature is convenient for situations
when you don’t want your ringer to disturb anyone.
Alarm On: This icon indicates that the alarm has been set.
Battery Strength: This icon displays the current level of the battery. The more
bars you see, the greater the charge. Zero bars indicate critically low battery
status, as additionally indicated by a flashing alert.
Full Charge
Empty Charge

10
BATTERY INFORMATION
The rechargeable Lithium-polymer battery included in your kit is partially charged so that you
can use the phone immediately once it has been activated.
Attaching the Battery
To attach the battery to your phone:
1. Lineup the metallic contacts on the base of the battery to the base of the phone.
2. Place the battery on the back of the phone, with the top of the battery about a quarter of
an inch from the latch.
3. Gently slide the battery towards the top of the phone until it snaps into place.
Charging the Battery
You can tell whether your battery needs to be recharged or not by checking the upper-right
corner of your phone’s display.
When the battery charge level becomes low, the battery sensor will alert you by blinking the
battery icon and making an audible warning tone. The phone will automatically power itself
off if the battery level becomes critically low, and any incoming or outgoing call will disconnect.
To avoid such disconnection, be mindful of the battery strength indicator and make sure your
battery is sufficiently charged.
Charging with a Travel Charger
Using an unauthorized accessory may be dangerous and will void the warranty if it causes
damage to the phone.
To charge the Battery using a Travel Charger:
- Plug the power cord of the charger into a wall outlet.
- Insert the charger’s connector to the bottom of the phone.
Note) Ensure a proper connection of the charger and the phone. Incomplete connection may
cause damage to the phone.

11
A completely discharged battery charges full in approximately tbd hours. Leaving your phone
powered on during charging or charging two batteries simultaneously will increase charge times.
Leaving the battery connected to the charger after it has been fully charged will not harm the
battery.
Turning your phone on and off.
When you’re ready to turn on your phone, press and hold “END/ ” until the display is turned
on and the phone makes the sound. When the phone has found a signal, the “ ” icon appears.
Once the phone is turned on, it enters Standby mode and you are able to make and receive calls.
To turn your phone off, press and hold “END/ ” until the display is turned off and the phone
makes the sounds. Then the display will go blank. When the phone is turned off, nothing is
displayed on screen.
Note: If “END/ ” is pressed for less than one second, the phone will not be turned off. This
function prevents your phone from being turned off accidentally.
Standby Mode.
Standby is the most basic state of your phone. The phone goes into standby mode soon after you
turn it on, or whenever you briefly press “END/ ”. When your phone is in Standby Mode, you
will typically see the banner (that’s the message displayed when you turn on your phone). If you
enter a phone number, you press “SEND” to complete the call, or press “STO ( )” to save it in
the internal phone book.
Power Save Mode
Your phone comes with a Power Save feature that will automatically be activated if your phone
is unable to find a signal after 15 minutes of searching. While this feature is active, the phone’s
battery power is conserved.
The phone will automatically recheck for a signal periodically. To manually force the phone to
recheck for a signal, press any key. A message on the display will let you know when the phone
is operating in Power Save Mode.
Conversation Mode.

12
You can place and answer calls only when your phone is turned on. During a call, the phone is
in Conversation Mode.
Battery Lifetime
Bateria
Tiempo de
conversacion Tiempo de reserva
Cellular
digital 3.8V Li-ion TBDmAh Desde TBD min hasta TBD min
TBD hrs hasta TBD
hrs

13
BASIC FUNCTIONS
1. Making Calls
To place a call:
Press and hold “END/ ” to power your phone on, as indicated by icons that appear on screen.
Enter the phone number (up to 32 digits) using the keypad. The phone number is displayed from
left to right.
Press “SEND”. The phone attempts to connect to the entered phone number (if service is
available).
You can also make calls from:
Your Phonebook or by using Speed Dial keys (see “1. Phonebook”).
2. Ending Calls
To end a call, press “END/ ”. Call time for the just ended call will display, along with the
name and number of the connected party (if available). The phone will then automatically
revert back to Standby.
3. Answering Calls
To answer an incoming call, press any key. If your phone is registered for Caller ID service, the
caller’s phone number will display on screen, and that caller’s name will also appear if the
caller’s number recognized in the Phonebook.
4. Correcting Entry Errors
Press CLR to erase one character at a time. You can erase the entire entry field by pressing and
holding down CLR for one second.
5. Storing Phone Numbers
Phone numbers for frequently used services are pre-programmed into your phone. To store a
number:
- Press the STO ( ) key after entering the number to store.
- Select a type of a phone number by scrolling “◀▶” and press “OK ( )”.
- Press “EDIT ( )” and designate a name. Press “OK ( )” to complete. Scroll “▲/
▼” to edit the location number and the phone number. Once you’ve finished editing,
press “OK ( )” to save.
- For more information, see “I. Phone Book”.

14
6. Volume
You can adjust volume of the earpiece by using the volume keys on the side of the phone.
Briefly press the volume key once to display your current earpiece volume setting. Repeatedly
press the volume key to adjust.
7. Redialing Last Dialed, Received, or Missed Number
Up to 20 dialed, received, or missed can be redialed directly. Simply press “SEND” to:
- Access the call log of 20 call entries in chronological order.
- Then, press the “VIEW ( )” key to see the time and number of the selected call.
- Simply press “SEND” to redial that number.
8. Speed Dial
Once a phone number is stored in your Phonebook, you can access and dial that number using
assigned speed dial keys.
Enter the location number of a stored number. The phone will then automatically connect to that
number.
9. Using Caller ID.
This feature informs you of the caller’s identification by displaying their number when the
phone rings.
If the corresponding caller’s information is already available in your Phonebook, that caller’s
name will appear on screen. Conversely, calling someone who has this feature will disclose your
number on their phone. To access the call log, press “SEND”.
10. Etiquette Mode
In social situations where audible rings, bells, or tones are inappropriate, such as in a movie
theater, at a museum, play, etc, your phone can be set on Etiquette mode. All incoming calls
under this mode will be notified by inaudible vibration. Press and hold “* ” to set the
Etiquette mode and once more to cancel.
11. Keypad Lock
You can lock the keypad to prevent the keys being accidentally pressed, for example, when your
phone is in your pocket.
- Locking the keypad : In standby mode, press “”#” for a second.
- Unlocking the keypad : Press “ ” and “#” orderly.
To answer a call when the keypad is locked, press any keys.

15
12. Silence Mode
If you want to silence an incoming ring, for example, when you are in a meeting, press
“END/ ”. Then the incoming ring will be silenced. Then the caller will be noticed that you are
not available to answer.
Note 1) Although the incoming ring is silenced, the call is still coming. If you want to answer,
press any keys.
Note 2) When you press “END/ ” to silence the incoming ring, the caller may be able to leave
a voice message or the call may be forwarded to others, which depends on your service provider.
Please contact your service provider for available options, such as Voice mail, Call forwarding,
etc.
13. Shortcut
There are several shortcuts that can be used to directly access useful functions.
- BREW: Press “▶” key to access BREW.
- Phonebook Entry: Press the “▼” key to view all the phone numbers stored in your
Phonebook alphabetically.
- Short Messaging Service: Press the SMS ( ) button to send or receive messages.

16
MENUS
I. Phonebook
1. Adding Entries in the Phonebook
After selecting “MENU ( )”, “1. Phone Book” and “1. PB Add” to add a phone number;
- Press “EDIT ( )” and designate a name. Press “OK ( )” to complete.
- Scroll “▲/▼” to edit the location number and the phone number. Once you’ve finished
editing, press “OK ( )” to save.
- Assign the phone number as a Mobile, Home, Office, or Etc by scrolling “◀/▶”.
※Note) A yellow frame outlining characters indicates that you can edit or type. For example,
if “No Name” has a yellow frame outside of each character, you can enter the name. Or if [001]
has a yellow frame outside of each number, you can change the location number.
To add Group, E-mail Address, Memo, or Bell Type for CID incoming rings, scroll “◀/▶”
before you press “OK ( )”.
- Group: Scroll “◀/▶” to choose Group and press “NEXT ( )” to scroll through
Family, Friends, Business, and No Group.
- E-mail: Press “EDIT ( )” to enter an e-mail address. Press “OK ( )” to complete.
- Memo: Press “EDIT ( )” to write a memo. Press “OK ( )” to complete. For more
information on writing memos, refer to ‘ENTERING LETTERS & NUMBERS’ on
page ___.
- Caller Identified Ring: If you are receiving Caller ID service and would like to set a
distinctive ring for a recognized phone number, press “NEXT ( )” and choose a
desired incoming bell type.
- Once finished registering all information for the entry, press “OK ( )” to store.
- Then you can see a message that the number you wanted to store was stored
successfully. And it goes to stand-by mode.
2. Phonebook Search
Access the Phonebook by pressing “▼” and view the list of all stored entries. Here, phone
number can also be searched by name, number, location number, or group.
a. Search by name
Search numbers stored in the Phonebook by entering a name.

17
- Press “MENU ( )” , “1. Phone Book”, “2. PB Search” and “1. Name”.
- Enter the name to search for.
- If you don’t remember the full name, just enter the first letter. Your phone will
display a list of all similar names.
- Press
“SEND” to dial.
- Or press “VIEW ( )” to edit or “DEL( )” to delete.
b. Search by Number
Search numbers stored in the Phonebook by entering a phone number.
- Press “MENU ( )” , “1. Phone Book”, “2. PB Search” and “2. Number”.
- Enter the number to search for and press “OK ( )”. Then, the name and location
assigned to that number will be displayed.
- Press
“SEND” to dial.
- Or press “VIEW ( )” to edit or “DEL( )” to delete.
- If the entered number is not stored in the Phonebook, a warning tone will sound and
“No Number Match” will appear on the display.
c. Search by location
Search numbers stored in the Phonebook by entering a location number.
- Press “MENU ( )”, “1. Phone Book”, “2. PB Search” and “3. Speed Key”.
- Enter the location number and press “OK ( )”.
- Press “SEND” to dial. “VIEW( )” to edit or “DEL( )” to delete.
- If a number is not stored in the location, “Empty Location” will appear on the display.
d. Search by group
Search numbers stored in the Phonebook by a group.
- Press “MENU ( )”, “1. Phone Book”, “2. PB Search”, and “4. Group” to access
“Choose Group” on the display.
- Scroll “◀▶” or “▲▼” to select from “Bussiness”, “Friends”, “Family” and “No
Group”
- Choose a group to view all the numbers associated to that group.
- Place the cursor on the number you want to dial by scrolling ▲/▼and press
“SEND”.
- Press “VIEW( )” to edit or “DEL( )” to delete.
e. Phonebook List Search
- Press “MENU ( )”, “1. Phone Book”, “2. PB Search”, and “5. PB List”.
- Your phone will then display all numbers stored in the phone in alphabetical order.
- Choose a number and press “SEND” to dial.
- Press “VIEW ( )” to edit or “DEL( )” to delete.

18
3. Call List
Call history, including number, time, and duration, can be referenced by:
- Pressing “MENU ( )”, “1. Phone Book”, and “3. Call List”.
- A log of dialed, received, and missed calls will be displayed.
4. Editing Groups
Three types of groups - Family, Friend, and Business - are available.
To change the name of groups or to add/remove groups, press “MENU ( )”, “1. Phone Book”,
and “4. Group Edit”.
- Select a group type and press “Add” and enter the name of group. Then press “OK
()” to save.
- Press “Edit” to edit or “Remove” to remove.
5. Check Memory
You can check how many entries are stored in both your phone.
- Press “MENU ( )”, “1. Phone Book”, and “5. Check Memory”.
- The total number of entries stored in your phone will then be displayed.
6. My Number
View your phone number. Press “MENU ( )”, “1. Phone Book”, and “6. My Number”.
II. VOLUME & ALERT
1. Selecting Bell
This option allows you to set an incoming call alert from a selection of bells and 40-poly MIDI
To set a bell, press “MENU ( )” and “2. Vol/Alert”, and “1. Bell Select”.
a. Melody
- Press “1. Melody” and press “▲”.
- Choose a type of melody among “Basic”, “Creative”, “Classic”, “Nature” or “Event”
by scrolling “◀/▶”.
- Once you choose a type of melody, press “▼”.
- Scroll “◀/▶” to choose a bell and press “OK ( )” to set.
b. PCSYNC Ringer
- Press “2. PCSYNC Ringer” and scroll “◀/▶” to select a melody type.
- Press “OK ( )” to set.
c. BREW Ringer
- Press “3. BREW Ringer” and scroll “◀/▶” to select a melody type.

19
- Press “OK ( )” to set.
2. Ring Type
You can choose from six incoming call alert settings.
- Press “MENU ( )”, “2. Vol/Alert”, and “2. Ring Type”.
- Select “Bell”, “Vibration”, “Bell ÆVib” and “Vib ÆBell”.
- Press “OK ( )” to set.
3. Volume
a. Bell Volume
This option allows you to set the bell volume level.
- Press “MENU ( )”, “2. Vol/Alert”, “3. Volume”, and “1. Bell Volume”.
- Scroll “▲/▼” to increase or decrease the volume level.
- Press “OK ( )” to set.
b. Key Volume
This option allows you to set the key volume level.
- Press “MENU ( )”, “2. Vol/Alert”, “3. Volume”, and “2. Key Volume”.
- Scroll “▲/▼” to increase or decrease the volume level.
- Press “OK ( )” to set.
c. Call Volume
This option allows you to set the earpiece volume level.
- Press “MENU ( )”, “2. Vol/Alert”, “3. Volume”, and “3. Call Volume”.
- Scroll “▲/▼” to increase or decrease the volume level.
- Press “OK ( )” to set.
4. Alert Settings
a. Connect Beep
This option allows you to be audibly notified when a call is connected.
- Press “MENU ( )”, “2. Vol/Alert”, “4. Alert Setting”, and “1. Connection”.
- Select between On and Off and press “OK ( )” to set.
b. Call Drop
This option allows you to be audibly notified when a call is disconnected or the other party
hangs up the phone.
- Press “MENU ( )”, “2. Vol/Alert”, “4. Alert Setting”, and “2. Drop”.
- Select between On and Off and press “OK ( )” to set.
c. 1 Minute Alert
This option allows you to be audibly warned when a call reaches the 1 minute mark.

20
- Press “MENU ( )”, “2. Vol/Alert”, “4. Alert Setting”, and “3. Minute”.
- Select between On and Off and press “OK ( )” to set.
d. Service
This option allows you to be audibly warned when you move into other base stations during
a call.
- Press “MENU ( )”, “2. Vol/Alert”, “4. Alert Setting”, and “4. Service”.
- Select between On or Off and press “OK ( )” to set.
5. Beep Length
DTMF tone length can be set at normal or long.
- Press “MENU ( )”, “2. Vol/Alert”, and “5. Beep Length”.
- Set the beep length “Normal” or “Long” and press “OK ( )” to set.
6. Roam Ringer
This option allows you to be audibly warned when the phone is roaming.
- Press “MENU ( )”, “2. Vol/Alert”, and “6. Roam Ringer”.
- Choose “OFF”, “RoamRing 1” or “RoamRing 2” and press “OK ( )” to set.
III. PERSONAL INFORMATION MANAGEMENT
Your phone supports various additional functions, including Alarm, Schedule, Memo, Calculator,
World Time and Calendar.
1. Alarm
The 24-hour alarm can be set to go off at a set time while your phone is on. If the phone is
powered off at the set time, the alarm will not sound. To set the alarm, press “MENU ( )”, “3.
PIM”, and “1. Alarm”.
- Choose “Alarm 1” or “Alarm 2” and press “SEL ( )”.
- Choose from Disable, Everyday, Mon~Sat, Mon~Fri, and Once Alarm by scrolling “◀/
▶”.
- Press “▼” and choose a Bell type and select the bell type by scrolling “◀▶”.
- Press “▼” and enter the time, and then select AM or PM by pressing “( )”
- Press “STO ( )” to set.
Note 1) You can set up to 2 different alarms.
Note 2)
- Disable: Once you’ve chosen Disable, the alarm will not sound even if you’ve set a