VacPak-It SV08 User manual

09/2018
ITEM DESCRIPTION VOLTAGE WATTAGE AMPS PLUG
SV08 Sous Vide Immersion Circulator (Head Only) 120V 1200W 10 Amps 5-15P
SV08KIT Sous Vide Immersion Circulator Head
& 8 Gallon Water Tank 120V 1200W 10 Amps 5-15P
Thank you for purchasing this VACPAK-IT equipment. Before operating the equipment,
please carefully read the following operating and safety instructions.
SOUS VIDE
IMMERSION CIRCULATOR

Features ......................................1
Safety Instructions ............................2
Operating Instructions .........................3
Control Panel .................................3
Maintenance Guide ............................4
Troubleshooting...............................4
Warranty .....................................4
More from VACPAK-IT..........................5

1.
FEATURES
CONTROL PANEL
WATER LEVEL INDICATORS
PUMP
(INSIDE)
COOLING FAN
(INSIDE)
HEATING ELEMENT
(INSIDE)
ADJUSTABLE CLAMP

2.
SAFETY INSTRUCTIONS
1. Use only grounded electrical outlets matching the nameplate rated voltage.
2. Have equipment installed by a qualified personnel in accordance with local
codes and ordinances.
3. Use equipment in a flat, level position.
4. DO NOT use a damaged cord or and extension cord with this equipment.
5. DO NOT plug this equipment into a power strip or multi-outlet power cord.
6. Unplug equipment and turn o before cleaning or moving.
7. DO NOT spray controls or outside of equipment with liquids or cleaning agents.
8. DO NOT clean the equipment with steel wool.
9. Keep equipment and power cord away from open flames, electric burners,
or excessive heat.
10. DO NOT operate equipment in public areas and/or around children.
11. DO NOT operate if equipment has been damaged or is malfunctioning in any way.
12. Only use this model for intended purpose.
13. DO NOT use this model to heat oil, grease, or any other liquid besides water.
14. DO NOT put your hands directly in the water.
15. The machine may still be hot to the touch right after use.
To ensure safe operation, carefully read the following statements.
These precautions should be followed at all times. Failure to follow these
precautions could result in injury to yourself and others.
To reduce risk of injury or damage to the equipment:

3.
1. Temperature Display - Shows the current water temperature.
2. Set Temperature Display - Shows the desired water temperature.
3. Time Display - Shows remaining heating/holding time.
4. Water Heating Indicator Light
5. Water Circulating Indicator Light
6. Temp/Time Button - Press to adjust temperature or time.
7. Increase Button - Press to increase temperature or time.
8. Decrease Button - Press to decrease temperature or time.
9. °C/°F Button - Press to toggle between Celsius and Fahrenheit display.
10. Start Button - Press to begin heating and circulating the water.
11. Stop Button - Press to stop operation.
1
7 9
10
3
2
11
6
5
4
8
OPERATING INSTRUCTIONS
CONTROL PANEL
1. Select a container for water bath. A water container with a 6" depth is required to use
with this equipment. This unit is designed to heat and circulate up to 8 gallons of water.
2. Attach the circulator head to the container via the adjustable clamp.
Make sure the circulator head is fixed firmly to the container.
3. Fill the container with water until it reaches a level between the MAX and MIN fill lines
on the circulator head.
4. Plug the machine into a grounded electrical outlet matching the nameplate related
voltage. The LCD screen will light up once the machine is plugged in.
5. Adjust and set controls (see below).

All equipment sold under the VACPAK-IT trademark and used for commercial purpose is warranted against
defects in materials and workmanship. The warranty runs for 1 year from time of purchase and is for the
benefit of the original purchaser only. All other warranties, Expressed or Implied, Statutory or otherwise,
including Without Limitation and any implied warranty of Merchantability or Fitness for Purposes are
excluded. The seller shall in no event be liable for direct, indirect, or consequential damages in connection
with VACPAK-IT commercial products.
This warranty is not eective if damage occurs due to accident, carelessness, improper installation, lack
of proper set-up, supervision when required, or if the equipment is installed or operated in any manner
contrary to the installation and operating instructions. Work performed by unauthorized personnel or
unauthorized service agencies voids this warranty. This warranty explicitly does not apply to, and VACPAK-
IT is not responsible for, any warranty claims made on products sold or used outside of the United States.
Cleaning
Storage
This model is intended for indoor use only at commercial food service establishments.
It is designed to provide precise temperature control of water for closed loop circulation.
To extend the life of this model, please clean every 20 uses, or 100 hours of use.
1. Fill a container with a solution of water and vinegar.
2. Turn the circulator head on and let it circulate water for 20 minutes.
3. Repeat this process with a container full of clean water to rinse.
4. To clean the filter, unplug the machine and allow it to cool down.
Open the machine housing and use a soft brush to remove particles from filter.
1. Store the model in an upright position after use to prevent water from
leaking into the top portion.
2. If liquid gets into the top part of the model, turn the power o and dry
with a clean towel before use.
MAINTENANCE
4.
ISSUE REMEDY
No power
to the unit
• Ensure the machine is properly plugged into a grounded outlet.
• Check the power cord for tears, frays, or other damage.
Do not use machine if the power cord is damaged.
The unit is no
longer heating
• Ensure that the water level is between the MIN and MAX fill lines
marked on the head. If not, allow the unit to cool and add water
until the level reaches between these 2 marks.

CHAMBER VACUUM PACKAGING MACHINES
VACUUM PACKAGING BAGS
Intertek
MORE FROM VACPAK-IT
5.