Valore BTi43 User manual

True Wireless Earbuds (BTi43)
Thank you for purchasing the Valore True Wireless Earbuds (BTi46).
• Splash-proof
• Touch controls
• USB-C charging
Important: Please read the user manual thoroughly before using your wireless earbuds.
Specifications: Package Contents:
• Wireless range: 10m
• Battery capacity: Built-in 300mAh lithium battery
(Charging case)
: Built-in 30mAh lithium battery
(Earbuds)
• Charging time: Approximately 1 hour
• Standby time: Up to 100 hours
• Playback time: Up to 4 hours
• Power input: DC 5V/1A
• Supports: A2DP, HFP, HSP, AVRCP, AAC
UNDERSTANDING THE PRODUCT
• True wireless earbuds
• USB-C charging cable
• Ear tips x 2 pairs
① Charging pins in case
② Charging base LED indicator
③ USB-C charging port
④ Multi-function touch area
⑤ Earbuds LED indicator
⑥ Charging pins on earbuds
⑦ Microphone
①
②③
④
⑤
⑥⑦

START USING THE WIRELESS EARBUDS
1) Charging
a) Charge the earbuds
Put the earbuds in the charging case to charge.
b) Charge the charging case
Charge the charging case with USB-C charging cable provided.
2) Power on/off
Open the charging case and take out the earbuds, it will automatically turn on or long press
touch area for 2 seconds to power on.
Put the earbuds into the charging case, it will power off automatically or long press touch area
for 4 seconds to power off.
3) Pairing both wireless earbuds (switched off)
Earbuds will connect to each other automatically. The main earbud will flash red and blue
alternately and the blue light of the auxiliary unit flases slowly.
Step 1: Activate Bluetooth function on your mobile device to begin pairing with earbuds.
Step 2: Remove earbuds from charging case and wait for earbuds to pair with each other.
Step 3: Connect to the earbuds by selecting ‘Valore BTi46” under the device list.
Step 4: Connection successful
If the pairing is not successful, please turn off wireless earbuds first, and then re-pair again. For subsequent
connection, when earbuds are removed from charging case, they will connect to device automatically. If you
want to pair the wireless earbuds with other devices, please turn off Bluetooth function of existing source
device, and pair the wireless earbuds with the new device according to steps 1-4 mentioned above.

4) Single earbud use
Remove a single earbud and close the charging case. Turn on Bluetooth on your mobile, find
“Valore BTI46” and click to connect.
5) Wearing method
Attach ear caps to earbuds into ear canal and turn it gently until it does not fall when it is
comfortable to fit. Wrong wearing style and unsuitable ear caps will affect the sound quality.
6) Function description
Music play/pause
next music
previous music
Touch the earbuds 1 time on the
‘multi-function touch area’
Double-click the right earbuds on the
‘multi-function touch area’
Double-click the left earbuds on the
‘multi-function touch area’
Siri
charging
interface port
USB-C cable charging to charge the
charging case (DC5V/1A)
Charging
Earbuds
Charging case
LED light status
indicator
The charging bay itself charging LED indicator
flashes red,
Answer/hang up
Refuse answer
the call
Touch the earbuds 1 time on the
‘multi-function touch area’
Long press the earbuds ‘multi-function
touch area’ for 2 seconds
Put the earbuds in the charging
compartment under low power condition,
the charging compartment will automatically
charge the earbuds
When using an iPhone, press and hold 2
seconds to start SIRI，with indication sound,
Touch 1 time again to exit SIRI
The charging compartment charges the
and the LED indicator is steady white
Volume +
Volume -
Three-click the left earbuds on the
‘multi-function touch area’
Three-click the right earbuds on the
‘multi-function touch area’
earbuds

TECHNICAL SUPPORT & WARRANTY
• For Technical Support, email us at [email protected].
• For Warranty Registration, visit www.valore.sg.
Cautions:
Read all the instructions and warnings carefully prior to using this product.
• Do not store the earbuds in a high temperature environment.
• Do not place the earbuds near a fire or other excessively hot environments.
• Do not expose this speakerto moisture or submerge it in liquid. Keep earbuds dry at all
times.
• Do not attempt to charge the earbuds using any other method or connection other than the
headset’s provided charging cable.
• Do not disassemble this earbuds or attempt to repair or modify it in any manner.
• Be cautious of excessive drops, bumps, abrasions or other impacts to this headset. If there
is any damage to the earbuds such as dents, punctures, tears, deformities or corrosion,
stop using the earbuds and contact us immediately via email at [email protected], or return
this product to the store where you have purchased it from.
• If the product produces an abnormal smell, high temperature (low temperature during
normal use), discolours or changes shape abnormally, stop using the product and contact us
immediately via email at [email protected].
DISCLAIMER & TRADEMARKS
All information, trademarks, logos, graphics, and images (“Materials”) provided on this user manual are
copyrighted or trademarked and are the property of Valore Lifestyle Pte Ltd. Any unauthorized use of any
material contained on the instruction manual may violate copyright laws, trademark laws, laws of privacy and
communications statutes.
The trademarks, service marks and logos used and displayed in the Materials are registered and unregistered
trademarks and service marks of Valore and others. All other registered and unregistered company names,
product names and marks mentioned herein the (“Materials”) are the property of their respective owners and
may be trademarks or registered trademarks.
Inspired by Valore Singapore
For full range of Valore products visit www.valore.sg