Valore BTS31 User manual

Bone Conduction
Wireless Earphones (BTS31)
Thank you for purchasing the Valore Bone Conduction Wireless Earphones (BTS31).
• Suitable for indoor/outdoor use
• Up to 6 hours playback time
• Open-ear design to stay alert to surrounding
Important: Please read the user manual thoroughly before using your wireless earphones.
Specifications: Package Contents:
• Wireless range: Up to 10M
• Built-in battery: 200mAh Lithium battery
• Standby time: Up to 240 hours
• Charging time: Approximately 2 hours
• Playback time: Up to 6 hours
• Power input: DC5V
UNDERSTANDING THE PRODUCT
• Bone conduction wireless earphones
• Micro-USB charging cable (400mm)
• Noise-reducing earplugs x 1 pair
Left buttonRight button
USB charging port
Charging indicator
Wearing method

START USING THE WIRELESS EARPHONES
1) Charging the wireless earphones
Connect the USB charging cable to the earphones located on the side of the left side.
When charging, the LED indicator is red and the red light will go off when fully charged.
Note:
1. Recommended to charge earphones before first use.
2. Earphones cannot be use while charging.
3. If not in use for a long time, it is recommended to charge once a month to
maintain battery life.
4. The earphones will automatically shut down if it is not connect to the device
for more than 5 minutes.
2) Pairing the wireless earphones (switched off)
Step 1: Activate Bluetooth function on your mobile device to begin pairing with earphones.
Step 2: Press and hold onto the Power button (Right button) until the LED light flickers
red and blue.
Step 3: Connect to the headphones by selecting ‘Valore BTS31’ under the device list.
Step 4: Once connected, the LED light at the Bluetooth button will blink blue in
interval of 5 seconds.
Note: If the pairing is not successful, please turn off wireless headset first, and then re-pair again. After pairing
is successful, paired devices will remember each other. Unless pairing information is deleted because of new
pairing, no need to pair when using the next time.
If you want to pair the wireless headset with other devices, please turn off Bluetooth function of existing source
device, and pair the wireless headset with the new device according to steps 1-4 mentioned above.

a) Chinese to English switch
The power is not connect, and there is no pairing status. Press the left and right button
together. When the prompt tone is heard, the switch is successful.
b) Play/Pause music
While in standby, click the left or right button to operate the player on phone.
c) Volume +
Double click the right button in music/call state to increase volume.
d) Volume -
Double click the left button in music/call state to decrease volume.
e) Previous track
In the music state, press the left button 3 times.
f) Next track
In the music state, press the right button 3 times.
g) Restore factory settings
Press and hold the left and right button for 3 seconds and press the red light for 3 consecutive
times, indicating that the factory settings have been restored.
h) Low battery
The red light is always on and accompanied by a prompt tone.
4) LED indicator
Steady red: Charging
Red light off: Charging complete
Blue and red flash: Pairing mode
Slow blue fash: Connected/Playing music
Flashing blue: Received a call/call
3) Wireless headset controls

TROUBLESHOOTING
Issue 1:headset is unable to connect successfully to your mobile device
Problem 1: Headset’s battery is flat
Solution: Fully charge the headset (2.5 hours) and retry connection with your mobile device.
Problem 2: Headset not paired to your mobile device
Solution: Make sure that the headset is successfully paired upon selecting ‘Valore BTS31’ in
the device list.
Problem 3: Headset and mobile device too far apart
Solution: Make sure that the headset is within a metre range during pairing and connection.
Problem 4: Headset is connected to other mobile device
Solution: Make sure that the headset has already been disconnected before making a new
connection with a new device.
Issue 2: Sound from the headset is too soft or silent
Problem 1: Headset’s battery is low / flat
Solution: Fully charge the headset (2.5 hours) and retry connection with your mobile device.
Problem 2: Headset or mobile device’s volume is too low
Solution: Turn the volume of the headset or mobile device up to increase the volume.
Problem 3: Music track may not be audible
Solution: Make sure that the music track is of a playable format for the mobile device.
Problem 4: Headset and mobile device might not be connected properly.
Solution: Repeat the connection step via Bluetooth/auxiliary cable again to make sure that it
is connected properly and try again.

TECHNICAL SUPPORT & WARRANTY
• For Technical Support, email us at [email protected].
• For Warranty Registration, visit www.valore.sg.
Cautions:
Read all the instructions and warnings carefully prior to using this product.
• Do not store the headset in a high temperature environment.
• Do not place the headset near a fire or other excessively hot environments.
• Do not expose this headset to moisture or submerge it in liquid. Keep headset dry at all
times.
• Do not attempt to charge the headset using any other method or connection other than the
headset’s provided charging cable.
• Do not disassemble this headset or attempt to repair or modify it in any manner.
• Be cautious of excessive drops, bumps, abrasions or other impacts to this headset. If there
is any damage to the headset such as dents, punctures, tears, deformities or corrosion, stop
using the headset and contact us immediately via email at [email protected], or return this
product to the store where you have purchased it from.
• If the product produces an abnormal smell, high temperature (low temperature during
normal use), discolours or changes shape abnormally, stop using the product and contact us
immediately via email at [email protected].
DISCLAIMER & TRADEMARKS
All information, trademarks, logos, graphics, and images (“Materials”) provided on this user manual are
copyrighted or trademarked and are the property of Valore Lifestyle Pte Ltd. Any unauthorized use of any
material contained on the instruction manual may violate copyright laws, trademark laws, laws of privacy and
communications statutes.
The trademarks, service marks and logos used and displayed in the Materials are registered and unregistered
trademarks and service marks of Valore and others. All other registered and unregistered company names,
product names and marks mentioned herein the (“Materials”) are the property of their respective owners and
may be trademarks or registered trademarks.
Inspired by Valore Singapore
For full range of Valore products visit www.valore.sg