Value 14.99.3460 User manual

HDMI EXTENDER OVER TP
１
USER MANUAL
HDMI Extender over TP
Model No. 14.99.3460

HDMI EXTENDER OVER TP
２
1. INTRODUCTION
This HDMI Extender is equipped with HDMI (high-definition multimedia interface) connectors and
can support DVI (digital visual interface) equipment when used with an HDMI to DVI Adapter,
providing greater flexibility and options when integrating several home theater components.
2. FEATURES
 CAT-5e cables can substitute HDMI cable to achieve long distance transmission.
 Follows the standard of IEEE-568B.
 Transmission distance can be up to 25 meters for 1080p.
 Compact size
 Signaling rates up to 1.65Gbps in support of 1080P display.
 HDCP compliant.
3. SPECIFICATIONS
Signal Input/Output
Input
Video Signal
0.5
-
1.
0
volts p
-
p
Input DDC Signal
5 volts p
-
p (TTL)
Maximum Single Link Range 1920X1200, 1080P
Output Video
HDMI
1.
2a
Video format supported
DTV/HDTV
1080P/1080i/720P/576P/480
P
/576
i/480i
Resolution
(HDTV)
Interlaced (50&60Hz) 480i,576i,1080i
Progressive (50&60Hz) 480p,576p,720p,1080p
Mechanical
Size (W x H x D) 45x2x81 mm
Weight (net) 0.246 kg
Power Consumption 5W (max.)
Power Requirement
Output
5V
DC
2A
AC Power Adapter
E
uropean
standard,
Note: 1: In order to achieve high transmission quality, please choose a shielded CAT-5
cable.
2: Cables with lower quality will not achieve the perfect transmission effect and a
long distance.
If the product cannot transmit long distances, there might be quality problems in the
transmission cables.
4. PACKAGE CONTENT
1) Sender
2) Receiver
3) Power Adapter
4) User Manual

HDMI EXTENDER OVER TP
３
5. PANEL DESCRIPTIONS
Sender
Receiver
1) HDMI input.
2) CAT-5e output 2.
3) CAT-5e output 1.
4) HDMI output
5) CAT-5e input 1
6) CAT-5e input 2
7) Power Input

HDMI EXTENDER OVER TP
４
6. CONNECTION AND OPERATION
1) Connect the HDMI input sources.
2) Connect two CAT-5e cables to both the output of the sender and input of the
receiver.
3) Connect the HDMI output into the receiver.
4) Plug the power into the receiver.
Attention: Insert / Extract cable gently.
7. CONNECTION DIAGRAM
DC 5V
CAT-5e cables
Sender Receiver
8. TROUBLESHOOTING
If the product does not work properly, please check following four points:
First, check if the connection between the HDMI cable and the extender is correct.
They all should be connected with cables of 1.8 meters or less. (In other words,
make sure that the problem is not caused by a too long cable).
Second, measure the cable length you are attempting to use between the sender
and the receiver.
If the signal is present under those conditions, make sure that the power is
available to the product.
Lastly, inspect the cables and connectors for damage.
HDMI signal source
such as STB
Display Such as
LCD TV