Vanguard SUB-10 User manual
D
SUB-10
10” 200W Floor Standing
Powered Subwoofer
OWNER’S MANUAL
FEATURES
INTRODUCTION
PLACEMENT
1. Front mounted volume control.
2. Auto on via audio sensing.
3. Auto standby.
4. 50 Hz to 150 Hz crossover adjustment.
5. 0 to 180 phase control.
6. Line level and LFE inputs and outputs.
7. Speaker level inputs and outputs.
8. Switching power supply 110V/230V.
performance, the SUB-10 200W Powered Subwoofer should be placed in a corner along the same wall as the front speakers.
When choosing a place for the SUB-10, please keep the following in mind:
DO:
ace.
• Place the SUB-10 in a well-vented area to provide proper cooling.
cabinets or racks, it may be necessary to install small fans to create air movement.
DON’T:
• Obstruct the driver or ports of the SUB-10 as that will hinder performance.
where the terminals are located.
• Place the SUB-10 near heat sources or in an area that it would be exposed to moisture.
Thank you for purchasing the Vanguard Dynamics SUB-10 10” 200W floor standing powered subwoofer. The SUB-10 adds
used properly, the subwoofer will deliver astonishing sound quality, whether playing music or movies, whatever the
listening environment. Please read this guide carefully, as it
your subwoofer.
SAFETY INSTRUCTIONS
•Explanation of Graphical Symbols
CAUTION: To reduce the risk of electric shock, do
not remove cover (or back). No user-serviceable parts
inside. Refer servicing to service personnel.
The lightning with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the presence
of uninsulated “dangerous voltage” within the product’s
enclosure that may be of magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle
is intended to alert you to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
11. Power-Cord Pr - Power-supply cords should be routed
so that they are not likely to be walked on or pinched by items placed
upon or against them, paying to cords at plugs,
convenience receptacles, and the point where they exit from the
appliance.
12. Cleaning - The appliance should be cleaned only as
recommended by the manufacturer.
13. Nonuse Periods - The power cord of the appliance should be
unplugged from the outlet when unused for a long period of
14. Object and Liquid Entry - Care should be taken so that objects
do not fall into and liquids not spilled into the inside of the appliance.
15. Damage Requiring Service - The appliance should be serviced
by qualified service personnel when:
a. The power-supply cord or the plug has been damaged; or
b. Objects have fallen onto, or liquid has been spilled into the
appliance; or
c. The appliance has been exposed to rain; or
d. The appliance does not appear to operate normally or exhibits
a marked change in performance; or
e. The appliance has been dropped, or the cabinet damaged.
16. Servicing - The user should not to service the appliance
beyond those means described in the All other
servicing should be referred to qualified service personnel.
17. Grounding or - The pr that should be
taken so that the grounding or means of an appliance is
not defeated.
1. Read - All the safety and should
be read before the appliance is operated.
2. Retain - The safety and should
be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
should be adhered to.
4. Follow - All and other should
be followed.
5. Water and Moisture - The appliance should not be used near
water - for example, near a bathtub, washbowl, kitchen sink, laundry
tub, in a wet basement, or near a swimming pool, etc.
6. Carts and Stands - The appliance should be used only with a cart
or stand that is recommended by the manufacturer.
PORTABLE CART
WARNING
7. Wall or Ceiling Mounting - The appliance should be mounted to
a wall or ceiling only as recommended by the manufacturer.
8. Ventilation - The appliance should be situated so that its location
or position does not interfere with its proper ventilation. For example,
the appliance should not be situated on a bed, sofa, rug, or similar
surface that may block the ventilation openings; or placed in a built-in
installation, such as a bookcase or cabinet that may impede the
of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources
such as radiators, stoves, or other appliances that produce heat.
10. Power Source - The appliance should be connected to a power
supply only of the type described in the operating instructions or as
marked on the appliance.
APPLICABLE FOR USA, CANADA OR WHERE APPROVED FOR
USAGE
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
PLUG TO WIDE SLOT, INSERT FULLY.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE
LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND.
D
SUB-10
10” 200W Floor Standing
Powered Subwoofer
D
SUB-10
10” 200W Floor Standing
Powered Subwoofer
CONTROLS CONNECTIONS
Auto feature will switch your
subwoofer on and off
Phase adjustment
Main voltage selector
Main voltage selector
Main power ON/OFF Switch
inputs if using with a 2-channel
hi-fi system.
socket if using an AV receiver or
Amp with Sub out.
Connect to Speaker Level Input
if using speaker wires.
Connect Speaker Level Output
to speakers.
To connect a second subwoofer
use the Line out sockets.
Crossover adjustment
D
SUB-10
10” 200W Floor Standing
Powered Subwoofer
LIMITED THREE-YEAR WARRANTY
Vanguard Dynamics warrants to the original retail purchaser only that this Vanguard Dynamics product will be free from
defects in materials and workmanship for a period of five years, provided the product was purchased from a Vanguard
the Vanguard Dynamics Authorized Dealer from whom they were purchased, or to the Vanguard Dynamics factory at the
this product in the original shipping container to lessen the chance of transit damage. In any case, the risk or loss or
damage in transit is to be borne by the purchaser.
the unit with a current model of equal or greater value. In some
All replace parts and product become the property of Vanguard Dynamics. Products replaced or repaired under this
not include procedures, commercial use, voltage inputs in excess of the rated maximum of the unit, or service, repair or
This warranty will be void if the serial number on the product has been removed, tampered with or defaced. This
above, the purchaser’s sole remedy shall be repair or replacement as provided above. In no event will Vanguard
if Vanguard Dynamics or a Vanguard Dynamics Authorized Dealer has been advised of the possibility of such damages, or
Engineered in the USA | 1 (866) 834 6321 | www.VanguardDynamics.com
4452 E. Airport Dr. Unit A, Ontario, CA 91761
LIMITED
3 YEAR
WARRANTY
Table of contents
