Vantec UGT-UF100 User manual

7-Port USB 2.0 & FireWire 400
Combo PCI Host Card
User Manual
Model: UGT-UF100
All brand names and trademarks are properties of their respective owners.
w w w . v a n t e c u s a . c o m


UGT-UF100Page2
2
Features and Benefits
zCombo design adds four USB 2.0 (480Mbps) and three
FireWire (400Mbps) ports into your system
zHot-swapping feature allows you to connect/disconnect
devices without first turning system off
USB 2.0 interface:
zCompliant with USB specification rev. 2.0
zSupports high-speed (480Mbps), full-speed (12Mbps), and
low-speed(1.5Mbps) data transfer modes for simultaneous
operation of multiple USB 2.0/1.1 devices
zWorks with a various type of USB devices including hubs,
removable drives, digital cameras, scanner, CD-RWs,
DVD-ROMs, PC video cameras, printers, and more…
FireWire 400 (1394a) interface:
zIEEE 1394-1995, 1394a-2000 and OHCI 1.1 standards
zSupports serial bus data transfer rates of 100, 200 and
400Mbps
zWorks with various types of 1394 devices including DV
camcorder/cameras, hard disk drives, CD-RWs,
DVD-ROMs, removable drives, scanners, and other
audio/video devices


UGT-UF100Page3
3
Package Contents
z1 x 7-Port USB 2.0 FireWire 400 Combo PCI Host Card
z1x 1394a DV cable (6-pin to 4-pin)
z1 x User’s Manual
System Requirements
zWindows® 2000/XP/Server 2003/Vista
zAvailable PCI slot
Hardware Description

Hardware Installation

UGT-UF100Page4
4
1. Turn Off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCI slot
4. To install the card, carefully align the card’s bus connector
with the selected PCI slot on the motherboard. Push the
board down firmly.
5. Connect the system power source to the board’s power
connector.
6. Replace the slot bracket’s holding screw to secure the card.


UGT-UF100Page5
5
7. Replace the computer cover and reconnect the power cord.
Driver Installation
For Windows® XP/2000
Windows® 2000/XP will automatically detect and install the
correct driver for the PCI USB 2.0 & IEEE 1394a Combo.
However, please ensure you have the latest Service Pack
Installed.
For Windows® XP
zWindows® XP Service Pack 1 or later
For Windows® 2000
zWindows® 2000 Service Pack 4 or later
For Windows® Server 2003/Vista
Windows® Server 2003 has built-in driver support for this
controller. Just install the board and Windows will automatically
detect and install the correct drivers for it. No additional driver is
necessary.

To Verify Windows Installation
1. Right click My Computer, then click Manage. Click Device
Manager.
2. Double click IEEE 1394 Bus host controllers option and a
VIA OHCI Compliant IEEE 1394 Host Controller should
be displayed
3. Double click Universal Serial Bus controllers option.
- USB Root Hub (USB 2.0 Root Hub in Windows® 2000)
- USB Root Hub
- USB Root Hub
- VIA Rev 5 or later USB Universal Host Controller
(VIA USB Universal Host Controller in Windows® 2000)
- VIA Rev 5 or later USB Universal Host Controller
(VIA USB Universal Host Controller in Windows® 2000)
- VIA USB Enhanced Host Controller

UGT-UF100Page6
6


UGT-UF100Page7
7