Varytec QUAD VISOR FX User manual

User manual
QUAD VISOR FX

2 / 6
Table of content
1. Safety instructions ........................................................................................................................... 3
1.1. FOR SAFE AND EFFICIENT OPERATION............................................................................ 3
2. Technical data ................................................................................................................................. 4
3. Operation......................................................................................................................................... 4
3.1. Functions via DIP .................................................................................................................... 4
3.2. Auto Mode ............................................................................................................................... 5
3.3. Sound Mode ............................................................................................................................ 5
3.4. Master/Slave Mode.................................................................................................................. 5
4. DMX Control.................................................................................................................................... 5

3 / 6
1. Safety instructions
•This device is suitable for indoor use only.
•All modifications to the device will void the warranty.
•Repairs are to carry out by skilled personnel only.
•Use only fuses of the same type and original parts as spare parts.
•Protect the unit from rain and humidity to avoid fire and electric shocks.
•Make sure to unplug the power supply before opening the housing.
1.1.FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperature
Avoid exposing it to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 41°F /5°C, or ex ceeding 113°F /45°C.
Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,
do not open the cabinet by yourself, it might result a danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug.
When not using the device for an extended period of time, be sure to disconnect the plug
from the receptacle .
Important: Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
problems. Make sure the electrical connection is carried out by qualified
personnel. All electrical and mechanical connections have to be carried out
according to the European safety standards.

4 / 6
2. Technical data
Power supply 90-250VAC, 50~60Hz
Power consumption 45W
Current 0.36A
Sound Control Via built-in microphone
DMX512 connection 3 Pin XLR
Weight 3.05 Kg
Measurements 250 x 250 x 230 mm
Maximum ambient temperature 45°C
Maximum housing temperature 50°C
Fuse F1A, 250V
Channel 5
Number of LEDs 2 x 9W, 108 x 5mm
3. Operation
3.1.Functions via DIP
Function
DIP1
DIP2
DIP3
DIP4
DIP5
DIP6
DIP7
DIP8
DIP9
DIP10
MODE
Red
1
0 0 0 0 0 0 0 0 0 Auto (Master)
Green 0
1
0 0 0 0 0 0 0 0 Auto (Master)
Blue 0 0
1
0 0 0 0 0 0 0 Auto (Master)
Purple/White
Strobe slow
0 0 0
1
0 0 0 0 0 0 Auto (Master)
RGB
Strobe slow
0 0 0 0
1
0 0 0 0 0 Auto (Master)
RG
Strobe fast
0 0 0 0 0
1
0 0 0 0 Auto (Master)
Motor mode 0 0 0 0 0 0
1
0 0 0 Auto (Master)
Auto 0 0 0 0 0 0 0
1
0 0 Auto (Master)
Sound
Control
0 0 0 0 0 0 0 0
1
0 Sound Control
(Master)
Master/Slave
0 0 0 0 0 0 0 0 0
1
Auto (Master)

5 / 6
3.2.Auto Mode
In order to select Auto mode, set DIP switch 1 to 10 to OFF, set DIP switch 8 to ON.
3.3.Sound Mode
In order to select Sound Control Mode, set DIP switch 1 to 10 to OFF, set DIP switch 9 to ON.
3.4.Master/Slave Mode
In order to select Master/Slave Mode, set Auto Mode or the Sound Control Mode from DIP switch 1 to
9 to OFF, set DIP switch 10 to ON. In Master/Slave operation one unit will act as the controlling unit
and the others will react to the controlling unit’s built-in programs.
4. DMX Control
Channel
Value
Function
CH1 000-004
005-028
029-056
057-084
085-112
113-140
141-168
169-197
198-224
225-255
LED Close
Red
Green
Blue
Blue/Green
Red/Blue
Green/Red
Red/Green/Blue
Tri color chase automatically
Seven color chase automatically
CH2 000-004
005-255
No strobe
Strobe from slow to fast
CH3 001-127
128-255
Motor positive rotation
Motor reversion rotation
CH4 000-063
064-127
128-191
192-255
LED Close
Purple
White
Purple/White
CH5 000-004
005-255
No strobe
Strobe from slow to fast

6 / 6
Importer:
B & K Braun GmbH
Industriestraße 1
D-76307 Karlsbad
www.bkbraun.com
[e-mail]