Varytec BAT.BALL 6in1 RGBWAP User manual

BAT.BALL 6in1 RGBWAP
LED effect
User manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
17.10.2017, ID: 385482

Table of contents
1 General notes............................................................................................................................................... 6
1.1 Further information........................................................................................................................... 7
1.2 Notational conventions.................................................................................................................... 8
1.3 Symbols and signal words............................................................................................................... 8
2 Safety instructions.................................................................................................................................. 10
3 Features....................................................................................................................................................... 14
4 Installation and starting up................................................................................................................ 15
5 Connections and controls................................................................................................................... 21
6 Operating.................................................................................................................................................... 24
6.1 Starting the device........................................................................................................................... 24
6.2 Main menu.......................................................................................................................................... 24
6.3 Menu overview................................................................................................................................. 26
6.4 Functions in 5-channel DMX mode........................................................................................... 27
7 Technical specifications....................................................................................................................... 28
8 Plug and connection assignments.................................................................................................. 29
Table of contents
BAT.BALL 6in1 RGBWAP 3
LED effect

9 Troubleshooting...................................................................................................................................... 30
10 Cleaning....................................................................................................................................................... 32
11 Protecting the environment.............................................................................................................. 33
Table of contents
4BAT.BALL 6in1 RGBWAP
LED effect

BAT.BALL 6in1 RGBWAP 5
LED effect

1 General notes
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General notes
6BAT.BALL 6in1 RGBWAP
LED effect

1.1 Further information
On our website (www.thomann.de) you will find lots of further information and details on the
following points:
Download This manual is also available as PDF file for you to download.
Keyword search Use the search function in the electronic version to find the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General notes
BAT.BALL 6in1 RGBWAP 7
LED effect

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’, ‘OFF’.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
Displays
General notes
8BAT.BALL 6in1 RGBWAP
LED effect

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos-
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos-
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – suspended load.
Warning – danger zone.
General notes
BAT.BALL 6in1 RGBWAP 9
LED effect

2 Safety instructions
This device is intended to be used as an electronic illumination effect using LED technics. The
device is designed for professional use and is not suitable for use in households. Use the
device only as described in this user manual. Any other use or use under other operating con-
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
10 BAT.BALL 6in1 RGBWAP
LED effect

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
Safety
Safety instructions
BAT.BALL 6in1 RGBWAP 11
LED effect

WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
NOTICE!
Risk of fire
Do not cover the device nor any ventilation slots. Do not place the device near
any direct heat source. Keep the device away from naked flames.
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Safety instructions
12 BAT.BALL 6in1 RGBWAP
LED effect

NOTICE!
External power supply
The device is powered by an AC adaptor plug. Before connecting the AC adaptor
plug, ensure that the input voltage (AC outlet) matches the voltage rating of the
device and that the AC outlet is protected by a residual current circuit breaker.
Failure to do so could result in damage to the device and possibly the user.
Unplug the AC adaptor plug before electrical storms occur and when the device is
unused for long periods of time to reduce the risk of electric shock or fire.
Safety instructions
BAT.BALL 6in1 RGBWAP 13
LED effect

3 Features
The LED-effect is suitable for almost all applications, for example in clubs, bars, small stages
and theatres. It is characterized by small size, solid construction also for use ‘on tour’ and enor-
mous power.
Special features of the device:
n6 × 3-W RGBWAP-LEDs
nOperation via battery (optionally available, item no 385488) or via supplied power adapter
nProduces countless dots in red, green, blue, white, amber and purple
nControl via DMX and via buttons and display on the unit
nAutomatic mode and sound control
nMaster / Slave operation
nDisplay of charge status in battery operation
nBattery charging time in the device approx. 3 h.
nOperating time with full light output approx. 3.5 hours in battery operation
Features
14 BAT.BALL 6in1 RGBWAP
LED effect

4 Installation and starting up
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
Installation and starting up
BAT.BALL 6in1 RGBWAP 15
LED effect

The device is designed for ceiling or wall mounting and has for this purpose two mounting
tabs on the bottom.
Ceiling or wall mounting
Installation and starting up
16 BAT.BALL 6in1 RGBWAP
LED effect

A Mounting tabs for ceiling or wall mounting of the unit.
B Air vents
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
NOTICE!
Risk of overheating
Always ensure sufficient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
Installation and starting up
BAT.BALL 6in1 RGBWAP 17
LED effect

NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi-
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli-
fiers.
Use appropriate mounting hardware to attach the unit to the ceiling or a wall. The designated
fastening area must be sufficiently stable for the load, level and vibration-free.
Create all connections while the device is off. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
Installation and starting up
18 BAT.BALL 6in1 RGBWAP
LED effect

Connect the DMX input of the device to the DMX output of a DMX controller or other DMX
device. Connect the output of the first DMX device to the input of the second and so on, to
form a series connection.
Such a chain may consist of up to 30 DMX devices. Make sure that the output of the last device
in the chain is terminated by a resistor (110 Ω, ¼W).
Connections in ‘DMX’ mode
Installation and starting up
BAT.BALL 6in1 RGBWAP 19
LED effect

When you configure a group of devices in ‘Master / Slave’ mode, the first device controls the
others and allows an automatic, music-controlled and synchronized show. This feature is espe-
cially useful to start a show without much programming. Connect the DMX output of the
master unit to the DMX input of the first slave unit. Then connect the DMX output of the first
slave unit to the DMX input of the second slave unit and so on (maximum 30 slaves).
Connections in ‘Master /
Slave‘ mode
Installation and starting up
20 BAT.BALL 6in1 RGBWAP
LED effect