Vava MOOV 25 User manual

VAVA MOOV 25 Wireless Stereo Headphones
Model: VA-BH006
Package Contents
1 x VAVA MOOV 25 Wireless Stereo Headphones
1 x USB Charging Cable
6 x Ear Buds (two are equipped on the headphones)
6 x Ear Hooks (two are equipped on the headphones)
1 x Travel Pouch
1 x Cable Clip
1 x User Guide
Product Diagram
1. Volume + / Next
2. Multifunction Button
3. LED Indicator
4. Volume - / Previous
5. Microphone
6. Micro USB Charging Port
How to Use
1. Charging
1) Connect the charging port with any USB charging adapter or active computer USB
port.
2) Charging will start automatically with LED indicator turning red.
3) The headphones are fully charged when LED indicator turns blue.
Note: Charge the headphones at least once every 6 months when not using for a long
time.

2. Pairing
1) Make sure the headphones and your Bluetooth® device are next to each other
(within 3 feet / 1 meter).
2) The first time you use the headphones, press and hold the Multifunction Button
until the LED indicator flashes red and blue alternately. Now the headphones are
in pairing mode.
3) Activate Bluetooth® function on your phone and search for nearby Bluetooth®
connections. Find “VAVA MOOV 25” in the search results. Tap on the name to
connect. Once connected, the LED indicator will flash blue.
Note：
The Bluetooth® headphones can remember previous paired devices.
If the headphones cannot pair with your Bluetooth® device, clear the pairing
history by pressing and holding the Volume + and Volume - Buttons at the same
time until the LED indicator flashes purple twice and 2 beep sounds are heard.
Then restart the headphones to pair again.
How to Wear
Please wear the headphones as shown in the diagram:
Attach the ear hooks onto the headphones.
Wear the headphones and the hooks on your ears and adjust for the best fit.

NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. This device
complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and(2) this device must accept any
interference received, including interference that may cause undesired operation.
Learn more about the EU Declaration of Conformity:
https://image.vava.com/media/downloads/VA-BH006-CE-Cert.pdf