Veatool MD012 User manual
Wireless Earbuds
User Manual
1.Power on: Open Lid and earbuds boost up autom
atically, or long press MFB for 3s, there is a “power
on”prompt tone.
2.Power off: Put back to case and close lid, earbuds
are automatically off, or long press MFB for 5s, there
is a “power off”prompt tone.
3.Single Click: Left earbuds (L) Volume Down, Right
earbuds (R) Volume Up. There is a beep at maximum
or minimum volume.
4.Double Click: Play/Pause; Answer Call/Hang up
Call; Reject call when on calling mode.
5.Triple Click: Left earbuds (L) Skip Back, Right earbu
ds(R) Skip forward.
6.Voice Assitance: Long press Left(L) for 2s to wake
up Siri with a beep, Long press for 2s to exit Siri with
Product Display indicator flashes; 75%-100% battery, forth segment
indicator flashes; Full battery, all lights always on.
7.Case charge the earbuds: open lid and case light
indicator is on for 60s; close lid(with earbuds inside),
earbud’s led light is on when charging, goes off
when full battery, light is off when earbud is not
inside.
1.After using for a period of time, the contacts are
oxidized, earbuds cannot be charged or turned on.
First, use alcohol and cloth to clean the contacts and
the two thimbles in the charging compartment to
solve the problem.
2.When you put the earbuds back into the charging
case, they will turn off and start charging; if you take
it out again, they will automatically turn on and pair
with each other automatically.
Notes on Charging
a beep.
7.Game Mode: Long press Right (R) for 2s, prompt
“Beep Game mode”to enter game mode; Long press
for 2s, prompt “Music mode”to enter music mode.
8.Factory Reset: Earbuds on and unconnected, quic
kly click MFB for 5 times to clear paring data, both
earbuds LED lights are on, automatically off after 3s.
Put earbuds back to charging case, close lid, open
lid and connect again.
1.L&R earbuds Pairing: Left and Right earbuds auto
pair, Masterearbud quickly flash when paring succe
ed, slave earbud light goes off.
2.Connect to device: both earbuds light go off when
connected to device. Search for bluetooth name
“VEATOOL MD012”,click and connected.
Bluetooth Pairing Instructions
3.Automatically connect back: After the first connect
ion is successful, earbuds will connect to the last pair
ed phone by default.
1.Power on: Indicator lights flash 3 times.
2.Power off: Indicator lights flash 1 time.
3.Un-connected: master earbuds light flash 1 time
per seconds.
4.Game mode: both earbuds lights are on and do
breathing effect.
5.Low Battery Warning: indicator light flash 1 time
per 3 seconds.
6.Charge the Case: <25% battery, first segment
indicator flashes; 25%-50% battery,second segment
indicator flashes; 50%-75% battery, third segment
Indicator Light Display
Product Display
Earphones Specification
Bluetooth Version: V5.0
Bluetooth Distance: >=10M
Battery: Polymer Battery 3.7V, 50mAh
Charging Time: 1H for Earphones, 1H for Charging Case
Playing Music/Call Time: 5 Hours (depends on music style and volume)
Supporting Protocol: A2DP 1.3/AVRCP 1.6/AVDTP 1.3/AVCTP 1.4/GAVDP 1.3/HFP
1.7 HSP 1.2/SPP 1.2/GATT 1.0
Charging Box: 3.7V,500mAh
Waterproof Rating: IPX5
Working Frequency: 2.402GHz-2.480GHz
Wireless Earbuds
User Manual
1.Power on: Open Lid and earbuds boost up autom
atically, or long press MFB for 3s, there is a “power
on”prompt tone.
2.Power off: Put back to case and close lid, earbuds
are automatically off, or long press MFB for 5s, there
is a “power off”prompt tone.
3.Single Click: Left earbuds (L) Volume Down, Right
earbuds (R) Volume Up. There is a beep at maximum
or minimum volume.
4.Double Click: Play/Pause; Answer Call/Hang up
Call; Reject call when on calling mode.
5.Triple Click: Left earbuds (L) Skip Back, Right earbu
ds(R) Skip forward.
6.Voice Assitance: Long press Left(L) for 2s to wake
up Siri with a beep, Long press for 2s to exit Siri with
Product Display indicator flashes; 75%-100% battery, forth segment
indicator flashes; Full battery, all lights always on.
7.Case charge the earbuds: open lid and case light
indicator is on for 60s; close lid(with earbuds inside),
earbud’s led light is on when charging, goes off
when full battery, light is off when earbud is not
inside.
1.After using for a period of time, the contacts are
oxidized, earbuds cannot be charged or turned on.
First, use alcohol and cloth to clean the contacts and
the two thimbles in the charging compartment to
solve the problem.
2.When you put the earbuds back into the charging
case, they will turn off and start charging; if you take
it out again, they will automatically turn on and pair
with each other automatically.
Notes on Charging
a beep.
7.Game Mode: Long press Right (R) for 2s, prompt
“Beep Game mode”to enter game mode; Long press
for 2s, prompt “Music mode”to enter music mode.
8.Factory Reset: Earbuds on and unconnected, quic
kly click MFB for 5 times to clear paring data, both
earbuds LED lights are on, automatically off after 3s.
Put earbuds back to charging case, close lid, open
lid and connect again.
1.L&R earbuds Pairing: Left and Right earbuds auto
pair, Masterearbud quickly flash when paring succe
ed, slave earbud light goes off.
2.Connect to device: both earbuds light go off when
connected to device. Search for bluetooth name
“VEATOOL MD012”,click and connected.
Bluetooth Pairing Instructions
3.Automatically connect back: After the first connect
ion is successful, earbuds will connect to the last pair
ed phone by default.
1.Power on: Indicator lights flash 3 times.
2.Power off: Indicator lights flash 1 time.
3.Un-connected: master earbuds light flash 1 time
per seconds.
4.Game mode: both earbuds lights are on and do
breathing effect.
5.Low Battery Warning: indicator light flash 1 time
per 3 seconds.
6.Charge the Case: <25% battery, first segment
indicator flashes; 25%-50% battery,second segment
indicator flashes; 50%-75% battery, third segment
Indicator Light Display
Product Display
Earphones Specification
Bluetooth Version: V5.0
Bluetooth Distance: >=10M
Battery: Polymer Battery 3.7V, 50mAh
Charging Time: 1H for Earphones, 1H for Charging Case
Playing Music/Call Time: 5 Hours (depends on music style and volume)
Supporting Protocol: A2DP 1.3/AVRCP 1.6/AVDTP 1.3/AVCTP 1.4/GAVDP 1.3/HFP
1.7 HSP 1.2/SPP 1.2/GATT 1.0
Charging Box: 3.7V,500mAh
Waterproof Rating: IPX5
Working Frequency: 2.402GHz-2.480GHz
Wireless Earbuds
User Manual
1.Power on: Open Lid and earbuds boost up autom
atically, or long press MFB for 3s, there is a “power
on”prompt tone.
2.Power off: Put back to case and close lid, earbuds
are automatically off, or long press MFB for 5s, there
is a “power off”prompt tone.
3.Single Click: Left earbuds (L) Volume Down, Right
earbuds (R) Volume Up. There is a beep at maximum
or minimum volume.
4.Double Click: Play/Pause; Answer Call/Hang up
Call; Reject call when on calling mode.
5.Triple Click: Left earbuds (L) Skip Back, Right earbu
ds(R) Skip forward.
6.Voice Assitance: Long press Left(L) for 2s to wake
up Siri with a beep, Long press for 2s to exit Siri with
Product Display indicator flashes; 75%-100% battery, forth segment
indicator flashes; Full battery, all lights always on.
7.Case charge the earbuds: open lid and case light
indicator is on for 60s; close lid(with earbuds inside),
earbud’s led light is on when charging, goes off
when full battery, light is off when earbud is not
inside.
1.After using for a period of time, the contacts are
oxidized, earbuds cannot be charged or turned on.
First, use alcohol and cloth to clean the contacts and
the two thimbles in the charging compartment to
solve the problem.
2.When you put the earbuds back into the charging
case, they will turn off and start charging; if you take
it out again, they will automatically turn on and pair
with each other automatically.
Notes on Charging
a beep.
7.Game Mode: Long press Right (R) for 2s, prompt
“Beep Game mode”to enter game mode; Long press
for 2s, prompt “Music mode”to enter music mode.
8.Factory Reset: Earbuds on and unconnected, quic
kly click MFB for 5 times to clear paring data, both
earbuds LED lights are on, automatically off after 3s.
Put earbuds back to charging case, close lid, open
lid and connect again.
1.L&R earbuds Pairing: Left and Right earbuds auto
pair, Masterearbud quickly flash when paring succe
ed, slave earbud light goes off.
2.Connect to device: both earbuds light go off when
connected to device. Search for bluetooth name
“VEATOOL MD012”,click and connected.
Bluetooth Pairing Instructions
3.Automatically connect back: After the first connect
ion is successful, earbuds will connect to the last pair
ed phone by default.
1.Power on: Indicator lights flash 3 times.
2.Power off: Indicator lights flash 1 time.
3.Un-connected: master earbuds light flash 1 time
per seconds.
4.Game mode: both earbuds lights are on and do
breathing effect.
5.Low Battery Warning: indicator light flash 1 time
per 3 seconds.
6.Charge the Case: <25% battery, first segment
indicator flashes; 25%-50% battery,second segment
indicator flashes; 50%-75% battery, third segment
Indicator Light Display
Product Display
Earphones Specification
Bluetooth Version: V5.0
Bluetooth Distance: >=10M
Battery: Polymer Battery 3.7V, 50mAh
Charging Time: 1H for Earphones, 1H for Charging Case
Playing Music/Call Time: 5 Hours (depends on music style and volume)
Supporting Protocol: A2DP 1.3/AVRCP 1.6/AVDTP 1.3/AVCTP 1.4/GAVDP 1.3/HFP
1.7 HSP 1.2/SPP 1.2/GATT 1.0
Charging Box: 3.7V,500mAh
Waterproof Rating: IPX5
Working Frequency: 2.402GHz-2.480GHz
Wireless Earbuds
User Manual
1.Power on: Open Lid and earbuds boost up autom
atically, or long press MFB for 3s, there is a “power
on”prompt tone.
2.Power off: Put back to case and close lid, earbuds
are automatically off, or long press MFB for 5s, there
is a “power off”prompt tone.
3.Single Click: Left earbuds (L) Volume Down, Right
earbuds (R) Volume Up. There is a beep at maximum
or minimum volume.
4.Double Click: Play/Pause; Answer Call/Hang up
Call; Reject call when on calling mode.
5.Triple Click: Left earbuds (L) Skip Back, Right earbu
ds(R) Skip forward.
6.Voice Assitance: Long press Left(L) for 2s to wake
up Siri with a beep, Long press for 2s to exit Siri with
Product Display indicator flashes; 75%-100% battery, forth segment
indicator flashes; Full battery, all lights always on.
7.Case charge the earbuds: open lid and case light
indicator is on for 60s; close lid(with earbuds inside),
earbud’s led light is on when charging, goes off
when full battery, light is off when earbud is not
inside.
1.After using for a period of time, the contacts are
oxidized, earbuds cannot be charged or turned on.
First, use alcohol and cloth to clean the contacts and
the two thimbles in the charging compartment to
solve the problem.
2.When you put the earbuds back into the charging
case, they will turn off and start charging; if you take
it out again, they will automatically turn on and pair
with each other automatically.
Notes on Charging
a beep.
7.Game Mode: Long press Right (R) for 2s, prompt
“Beep Game mode”to enter game mode; Long press
for 2s, prompt “Music mode”to enter music mode.
8.Factory Reset: Earbuds on and unconnected, quic
kly click MFB for 5 times to clear paring data, both
earbuds LED lights are on, automatically off after 3s.
Put earbuds back to charging case, close lid, open
lid and connect again.
1.L&R earbuds Pairing: Left and Right earbuds auto
pair, Masterearbud quickly flash when paring succe
ed, slave earbud light goes off.
2.Connect to device: both earbuds light go off when
connected to device. Search for bluetooth name
“VEATOOL MD012”,click and connected.
Bluetooth Pairing Instructions
3.Automatically connect back: After the first connect
ion is successful, earbuds will connect to the last pair
ed phone by default.
1.Power on: Indicator lights flash 3 times.
2.Power off: Indicator lights flash 1 time.
3.Un-connected: master earbuds light flash 1 time
per seconds.
4.Game mode: both earbuds lights are on and do
breathing effect.
5.Low Battery Warning: indicator light flash 1 time
per 3 seconds.
6.Charge the Case: <25% battery, first segment
indicator flashes; 25%-50% battery,second segment
indicator flashes; 50%-75% battery, third segment
Indicator Light Display
Product Display
Earphones Specification
Bluetooth Version: V5.0
Bluetooth Distance: >=10M
Battery: Polymer Battery 3.7V, 50mAh
Charging Time: 1H for Earphones, 1H for Charging Case
Playing Music/Call Time: 5 Hours (depends on music style and volume)
Supporting Protocol: A2DP 1.3/AVRCP 1.6/AVDTP 1.3/AVCTP 1.4/GAVDP 1.3/HFP
1.7 HSP 1.2/SPP 1.2/GATT 1.0
Charging Box: 3.7V,500mAh
Waterproof Rating: IPX5
Working Frequency: 2.402GHz-2.480GHz
Wireless Earbuds
User Manual
1.Power on: Open Lid and earbuds boost up autom
atically, or long press MFB for 3s, there is a “power
on”prompt tone.
2.Power off: Put back to case and close lid, earbuds
are automatically off, or long press MFB for 5s, there
is a “power off”prompt tone.
3.Single Click: Left earbuds (L) Volume Down, Right
earbuds (R) Volume Up. There is a beep at maximum
or minimum volume.
4.Double Click: Play/Pause; Answer Call/Hang up
Call; Reject call when on calling mode.
5.Triple Click: Left earbuds (L) Skip Back, Right earbu
ds(R) Skip forward.
6.Voice Assitance: Long press Left(L) for 2s to wake
up Siri with a beep, Long press for 2s to exit Siri with
Product Display indicator flashes; 75%-100% battery, forth segment
indicator flashes; Full battery, all lights always on.
7.Case charge the earbuds: open lid and case light
indicator is on for 60s; close lid(with earbuds inside),
earbud’s led light is on when charging, goes off
when full battery, light is off when earbud is not
inside.
1.After using for a period of time, the contacts are
oxidized, earbuds cannot be charged or turned on.
First, use alcohol and cloth to clean the contacts and
the two thimbles in the charging compartment to
solve the problem.
2.When you put the earbuds back into the charging
case, they will turn off and start charging; if you take
it out again, they will automatically turn on and pair
with each other automatically.
Notes on Charging
a beep.
7.Game Mode: Long press Right (R) for 2s, prompt
“Beep Game mode”to enter game mode; Long press
for 2s, prompt “Music mode”to enter music mode.
8.Factory Reset: Earbuds on and unconnected, quic
kly click MFB for 5 times to clear paring data, both
earbuds LED lights are on, automatically off after 3s.
Put earbuds back to charging case, close lid, open
lid and connect again.
1.L&R earbuds Pairing: Left and Right earbuds auto
pair, Masterearbud quickly flash when paring succe
ed, slave earbud light goes off.
2.Connect to device: both earbuds light go off when
connected to device. Search for bluetooth name
“VEATOOL MD012”,click and connected.
Bluetooth Pairing Instructions
3.Automatically connect back: After the first connect
ion is successful, earbuds will connect to the last pair
ed phone by default.
1.Power on: Indicator lights flash 3 times.
2.Power off: Indicator lights flash 1 time.
3.Un-connected: master earbuds light flash 1 time
per seconds.
4.Game mode: both earbuds lights are on and do
breathing effect.
5.Low Battery Warning: indicator light flash 1 time
per 3 seconds.
6.Charge the Case: <25% battery, first segment
indicator flashes; 25%-50% battery,second segment
indicator flashes; 50%-75% battery, third segment
Indicator Light Display
Product Display
Earphones Specification
Bluetooth Version: V5.0
Bluetooth Distance: >=10M
Battery: Polymer Battery 3.7V, 50mAh
Charging Time: 1H for Earphones, 1H for Charging Case
Playing Music/Call Time: 5 Hours (depends on music style and volume)
Supporting Protocol: A2DP 1.3/AVRCP 1.6/AVDTP 1.3/AVCTP 1.4/GAVDP 1.3/HFP
1.7 HSP 1.2/SPP 1.2/GATT 1.0
Charging Box: 3.7V,500mAh
Waterproof Rating: IPX5
Working Frequency: 2.402GHz-2.480GHz
Wireless Earbuds
User Manual
1.Power on: Open Lid and earbuds boost up autom
atically, or long press MFB for 3s, there is a “power
on”prompt tone.
2.Power off: Put back to case and close lid, earbuds
are automatically off, or long press MFB for 5s, there
is a “power off”prompt tone.
3.Single Click: Left earbuds (L) Volume Down, Right
earbuds (R) Volume Up. There is a beep at maximum
or minimum volume.
4.Double Click: Play/Pause; Answer Call/Hang up
Call; Reject call when on calling mode.
5.Triple Click: Left earbuds (L) Skip Back, Right earbu
ds(R) Skip forward.
6.Voice Assitance: Long press Left(L) for 2s to wake
up Siri with a beep, Long press for 2s to exit Siri with
Product Display indicator flashes; 75%-100% battery, forth segment
indicator flashes; Full battery, all lights always on.
7.Case charge the earbuds: open lid and case light
indicator is on for 60s; close lid(with earbuds inside),
earbud’s led light is on when charging, goes off
when full battery, light is off when earbud is not
inside.
1.After using for a period of time, the contacts are
oxidized, earbuds cannot be charged or turned on.
First, use alcohol and cloth to clean the contacts and
the two thimbles in the charging compartment to
solve the problem.
2.When you put the earbuds back into the charging
case, they will turn off and start charging; if you take
it out again, they will automatically turn on and pair
with each other automatically.
Notes on Charging
a beep.
7.Game Mode: Long press Right (R) for 2s, prompt
“Beep Game mode”to enter game mode; Long press
for 2s, prompt “Music mode”to enter music mode.
8.Factory Reset: Earbuds on and unconnected, quic
kly click MFB for 5 times to clear paring data, both
earbuds LED lights are on, automatically off after 3s.
Put earbuds back to charging case, close lid, open
lid and connect again.
1.L&R earbuds Pairing: Left and Right earbuds auto
pair, Masterearbud quickly flash when paring succe
ed, slave earbud light goes off.
2.Connect to device: both earbuds light go off when
connected to device. Search for bluetooth name
“VEATOOL MD012”,click and connected.
Bluetooth Pairing Instructions
3.Automatically connect back: After the first connect
ion is successful, earbuds will connect to the last pair
ed phone by default.
1.Power on: Indicator lights flash 3 times.
2.Power off: Indicator lights flash 1 time.
3.Un-connected: master earbuds light flash 1 time
per seconds.
4.Game mode: both earbuds lights are on and do
breathing effect.
5.Low Battery Warning: indicator light flash 1 time
per 3 seconds.
6.Charge the Case: <25% battery, first segment
indicator flashes; 25%-50% battery,second segment
indicator flashes; 50%-75% battery, third segment
Indicator Light Display
Product Display
Earphones Specification
Bluetooth Version: V5.0
Bluetooth Distance: >=10M
Battery: Polymer Battery 3.7V, 50mAh
Charging Time: 1H for Earphones, 1H for Charging Case
Playing Music/Call Time: 5 Hours (depends on music style and volume)
Supporting Protocol: A2DP 1.3/AVRCP 1.6/AVDTP 1.3/AVCTP 1.4/GAVDP 1.3/HFP
1.7 HSP 1.2/SPP 1.2/GATT 1.0
Charging Box: 3.7V,500mAh
Waterproof Rating: IPX5
Working Frequency: 2.402GHz-2.480GHz
a.The recommended operating temperature range
is: 0-35 degrees; excessive cold, overheating, or high
temperature environments will reduce battery life
and affect product performance.
b.Do not use under thunderstorms.
c.After a long period of non-use, please charge it
before use.
d.Please use a dry soft cloth to clean the earbuds.
e.If there is water or sweat at the notch, wipe it with
a dry cloth, it will not affect normal use.
Maintenance:
1.The earbuds cannot be paired with the mobile
phone.Please check whether the earbuds are in
pairing or back-to-back mode, and check the mobile
phone Bluetooth search function.
2.The earbuds cannot be turned on.Please check if
the earbuds are fully charged and charge them.
3.Can I replace the battery of earphone?
No, these earbuds use the non-removable battery.
Notes on Charging
Common Problem
Bluetooth earphones
Charging case
Charging Cable
Spare ear caps
User Manual
X2
X1
X1
X1
X2
Official website Email
veatool.cn Amazon@veatool.cn
4.Can I use the earbuds while driving?
You can use earbuds while driving, while driving
and minimize the volume.
5.The earbuds are disconnected from the phone.The
efective distance of these earbuds are 10 meters
indoors. If the distance between the mobile phone
and the earbud exceeds 10 meters or there are
multiple obstacles, the earbud and the mobile phone
will be disconnected. Please keep the earbud within
the efective distance.
6.After the earbuds are connected to a computer or
mobile phone, hear different sounds?Because
Bluetooth is a wireless technology, it is very sensitive
to objects between the earbuds and the connected
device.Please check whether there is metal or other
objects in the connection range that affect the
connection.
7.After the Bluetooth earbuds are connected to the
Customer Service Email : Amazon@veatool.cn
Office Web: veatool.cn
No matter the product is lost, outdated, broken or
you just don’t like this product, please contact our
customer service Amazon@veatool.cn , she will do
her best to give you a satisfactory answer.
Customer Sopport
5.Pls put the items and accessories to the places
which can not be touched by kids or pets to avoid
any unexpected accidents.
6.Earbuds and charging case are with built in
rechargeable battary,can not be dis-assembled ,Pls
make sure the earbuds and case are fully charged
before using it for first time.
1.keep this product away from high temperature
areas.
2.Please try to use qualified chargers and charging
cables, and try to avoid using high current and
voltage fast charging devices to charge this product.
3.The waterproof grade of this product is IPX5,
please choose the appropriate scene to use this
product.
4.Do not disassemble or refit the earbuds for any
reason, it make broken or born the earbuds, Please
send it to sales agency to repair.
Safety Problem：
mobile phone, can the earphone be used to control
the applications on the mobile phone?The software
settings of device applications may be different, so
that the functions of individual applications do not
support the earphone controlling.
a.The recommended operating temperature range
is: 0-35 degrees; excessive cold, overheating, or high
temperature environments will reduce battery life
and affect product performance.
b.Do not use under thunderstorms.
c.After a long period of non-use, please charge it
before use.
d.Please use a dry soft cloth to clean the earbuds.
e.If there is water or sweat at the notch, wipe it with
a dry cloth, it will not affect normal use.
Maintenance:
1.The earbuds cannot be paired with the mobile
phone.Please check whether the earbuds are in
pairing or back-to-back mode, and check the mobile
phone Bluetooth search function.
2.The earbuds cannot be turned on.Please check if
the earbuds are fully charged and charge them.
3.Can I replace the battery of earphone?
No, these earbuds use the non-removable battery.
Notes on Charging
Common Problem
Bluetooth earphones
Charging case
Charging Cable
Spare ear caps
User Manual
X2
X1
X1
X1
X2
Official website Email
veatool.cn Amazon@veatool.cn
4.Can I use the earbuds while driving?
You can use earbuds while driving, while driving
and minimize the volume.
5.The earbuds are disconnected from the phone.The
efective distance of these earbuds are 10 meters
indoors. If the distance between the mobile phone
and the earbud exceeds 10 meters or there are
multiple obstacles, the earbud and the mobile phone
will be disconnected. Please keep the earbud within
the efective distance.
6.After the earbuds are connected to a computer or
mobile phone, hear different sounds?Because
Bluetooth is a wireless technology, it is very sensitive
to objects between the earbuds and the connected
device.Please check whether there is metal or other
objects in the connection range that affect the
connection.
7.After the Bluetooth earbuds are connected to the
Customer Service Email : Amazon@veatool.cn
Office Web: veatool.cn
No matter the product is lost, outdated, broken or
you just don’t like this product, please contact our
customer service Amazon@veatool.cn , she will do
her best to give you a satisfactory answer.
Customer Sopport
5.Pls put the items and accessories to the places
which can not be touched by kids or pets to avoid
any unexpected accidents.
6.Earbuds and charging case are with built in
rechargeable battary,can not be dis-assembled ,Pls
make sure the earbuds and case are fully charged
before using it for first time.
1.keep this product away from high temperature
areas.
2.Please try to use qualified chargers and charging
cables, and try to avoid using high current and
voltage fast charging devices to charge this product.
3.The waterproof grade of this product is IPX5,
please choose the appropriate scene to use this
product.
4.Do not disassemble or refit the earbuds for any
reason, it make broken or born the earbuds, Please
send it to sales agency to repair.
Safety Problem：
mobile phone, can the earphone be used to control
the applications on the mobile phone?The software
settings of device applications may be different, so
that the functions of individual applications do not
support the earphone controlling.
a.The recommended operating temperature range
is: 0-35 degrees; excessive cold, overheating, or high
temperature environments will reduce battery life
and affect product performance.
b.Do not use under thunderstorms.
c.After a long period of non-use, please charge it
before use.
d.Please use a dry soft cloth to clean the earbuds.
e.If there is water or sweat at the notch, wipe it with
a dry cloth, it will not affect normal use.
Maintenance:
1.The earbuds cannot be paired with the mobile
phone.Please check whether the earbuds are in
pairing or back-to-back mode, and check the mobile
phone Bluetooth search function.
2.The earbuds cannot be turned on.Please check if
the earbuds are fully charged and charge them.
3.Can I replace the battery of earphone?
No, these earbuds use the non-removable battery.
Notes on Charging
Common Problem
Bluetooth earphones
Charging case
Charging Cable
Spare ear caps
User Manual
X2
X1
X1
X1
X2
Official website Email
veatool.cn Amazon@veatool.cn
4.Can I use the earbuds while driving?
You can use earbuds while driving, while driving
and minimize the volume.
5.The earbuds are disconnected from the phone.The
efective distance of these earbuds are 10 meters
indoors. If the distance between the mobile phone
and the earbud exceeds 10 meters or there are
multiple obstacles, the earbud and the mobile phone
will be disconnected. Please keep the earbud within
the efective distance.
6.After the earbuds are connected to a computer or
mobile phone, hear different sounds?Because
Bluetooth is a wireless technology, it is very sensitive
to objects between the earbuds and the connected
device.Please check whether there is metal or other
objects in the connection range that affect the
connection.
7.After the Bluetooth earbuds are connected to the
Customer Service Email : Amazon@veatool.cn
Office Web: veatool.cn
No matter the product is lost, outdated, broken or
you just don’t like this product, please contact our
customer service Amazon@veatool.cn , she will do
her best to give you a satisfactory answer.
Customer Sopport
5.Pls put the items and accessories to the places
which can not be touched by kids or pets to avoid
any unexpected accidents.
6.Earbuds and charging case are with built in
rechargeable battary,can not be dis-assembled ,Pls
make sure the earbuds and case are fully charged
before using it for first time.
1.keep this product away from high temperature
areas.
2.Please try to use qualified chargers and charging
cables, and try to avoid using high current and
voltage fast charging devices to charge this product.
3.The waterproof grade of this product is IPX5,
please choose the appropriate scene to use this
product.
4.Do not disassemble or refit the earbuds for any
reason, it make broken or born the earbuds, Please
send it to sales agency to repair.
Safety Problem：
mobile phone, can the earphone be used to control
the applications on the mobile phone?The software
settings of device applications may be different, so
that the functions of individual applications do not
support the earphone controlling.
a.The recommended operating temperature range
is: 0-35 degrees; excessive cold, overheating, or high
temperature environments will reduce battery life
and affect product performance.
b.Do not use under thunderstorms.
c.After a long period of non-use, please charge it
before use.
d.Please use a dry soft cloth to clean the earbuds.
e.If there is water or sweat at the notch, wipe it with
a dry cloth, it will not affect normal use.
Maintenance:
1.The earbuds cannot be paired with the mobile
phone.Please check whether the earbuds are in
pairing or back-to-back mode, and check the mobile
phone Bluetooth search function.
2.The earbuds cannot be turned on.Please check if
the earbuds are fully charged and charge them.
3.Can I replace the battery of earphone?
No, these earbuds use the non-removable battery.
Notes on Charging
Common Problem
Bluetooth earphones
Charging case
Charging Cable
Spare ear caps
User Manual
X2
X1
X1
X1
X2
Official website Email
veatool.cn Amazon@veatool.cn
4.Can I use the earbuds while driving?
You can use earbuds while driving, while driving
and minimize the volume.
5.The earbuds are disconnected from the phone.The
efective distance of these earbuds are 10 meters
indoors. If the distance between the mobile phone
and the earbud exceeds 10 meters or there are
multiple obstacles, the earbud and the mobile phone
will be disconnected. Please keep the earbud within
the efective distance.
6.After the earbuds are connected to a computer or
mobile phone, hear different sounds?Because
Bluetooth is a wireless technology, it is very sensitive
to objects between the earbuds and the connected
device.Please check whether there is metal or other
objects in the connection range that affect the
connection.
7.After the Bluetooth earbuds are connected to the
Customer Service Email : Amazon@veatool.cn
Office Web: veatool.cn
No matter the product is lost, outdated, broken or
you just don’t like this product, please contact our
customer service Amazon@veatool.cn , she will do
her best to give you a satisfactory answer.
Customer Sopport
5.Pls put the items and accessories to the places
which can not be touched by kids or pets to avoid
any unexpected accidents.
6.Earbuds and charging case are with built in
rechargeable battary,can not be dis-assembled ,Pls
make sure the earbuds and case are fully charged
before using it for first time.
1.keep this product away from high temperature
areas.
2.Please try to use qualified chargers and charging
cables, and try to avoid using high current and
voltage fast charging devices to charge this product.
3.The waterproof grade of this product is IPX5,
please choose the appropriate scene to use this
product.
4.Do not disassemble or refit the earbuds for any
reason, it make broken or born the earbuds, Please
send it to sales agency to repair.
Safety Problem：
mobile phone, can the earphone be used to control
the applications on the mobile phone?The software
settings of device applications may be different, so
that the functions of individual applications do not
support the earphone controlling.
a.The recommended operating temperature range
is: 0-35 degrees; excessive cold, overheating, or high
temperature environments will reduce battery life
and affect product performance.
b.Do not use under thunderstorms.
c.After a long period of non-use, please charge it
before use.
d.Please use a dry soft cloth to clean the earbuds.
e.If there is water or sweat at the notch, wipe it with
a dry cloth, it will not affect normal use.
Maintenance:
1.The earbuds cannot be paired with the mobile
phone.Please check whether the earbuds are in
pairing or back-to-back mode, and check the mobile
phone Bluetooth search function.
2.The earbuds cannot be turned on.Please check if
the earbuds are fully charged and charge them.
3.Can I replace the battery of earphone?
No, these earbuds use the non-removable battery.
Notes on Charging
Common Problem
Bluetooth earphones
Charging case
Charging Cable
Spare ear caps
User Manual
X2
X1
X1
X1
X2
Official website Email
veatool.cn Amazon@veatool.cn
4.Can I use the earbuds while driving?
You can use earbuds while driving, while driving
and minimize the volume.
5.The earbuds are disconnected from the phone.The
efective distance of these earbuds are 10 meters
indoors. If the distance between the mobile phone
and the earbud exceeds 10 meters or there are
multiple obstacles, the earbud and the mobile phone
will be disconnected. Please keep the earbud within
the efective distance.
6.After the earbuds are connected to a computer or
mobile phone, hear different sounds?Because
Bluetooth is a wireless technology, it is very sensitive
to objects between the earbuds and the connected
device.Please check whether there is metal or other
objects in the connection range that affect the
connection.
7.After the Bluetooth earbuds are connected to the
Office Web: veatool.cn
No matter the product is lost, outdated, broken or
you just don’t like this product, please contact our
her best to give you a satisfactory answer.
Customer Sopport
5.Pls put the items and accessories to the places
which can not be touched by kids or pets to avoid
any unexpected accidents.
6.Earbuds and charging case are with built in
rechargeable battary,can not be dis-assembled ,Pls
make sure the earbuds and case are fully charged
before using it for first time.
1.keep this product away from high temperature
areas.
2.Please try to use qualified chargers and charging
cables, and try to avoid using high current and
voltage fast charging devices to charge this product.
3.The waterproof grade of this product is IPX5,
please choose the appropriate scene to use this
product.
4.Do not disassemble or refit the earbuds for any
reason, it make broken or born the earbuds, Please
send it to sales agency to repair.
Safety Problem：
mobile phone, can the earphone be used to control
the applications on the mobile phone?The software
settings of device applications may be different, so
that the functions of individual applications do not
support the earphone controlling.
a.The recommended operating temperature range
is: 0-35 degrees; excessive cold, overheating, or high
temperature environments will reduce battery life
and affect product performance.
b.Do not use under thunderstorms.
c.After a long period of non-use, please charge it
before use.
d.Please use a dry soft cloth to clean the earbuds.
e.If there is water or sweat at the notch, wipe it with
a dry cloth, it will not affect normal use.
Maintenance:
1.The earbuds cannot be paired with the mobile
phone.Please check whether the earbuds are in
pairing or back-to-back mode, and check the mobile
phone Bluetooth search function.
2.The earbuds cannot be turned on.Please check if
the earbuds are fully charged and charge them.
3.Can I replace the battery of earphone?
No, these earbuds use the non-removable battery.
Notes on Charging
Common Problem
Bluetooth earphones
Charging case
Charging Cable
Spare ear caps
User Manual
X2
X1
X1
X1
X2
Official website Email
veatool.cn Amazon@veatool.cn
4.Can I use the earbuds while driving?
You can use earbuds while driving, while driving
and minimize the volume.
5.The earbuds are disconnected from the phone.The
efective distance of these earbuds are 10 meters
indoors. If the distance between the mobile phone
and the earbud exceeds 10 meters or there are
multiple obstacles, the earbud and the mobile phone
will be disconnected. Please keep the earbud within
the efective distance.
6.After the earbuds are connected to a computer or
mobile phone, hear different sounds?Because
Bluetooth is a wireless technology, it is very sensitive
to objects between the earbuds and the connected
device.Please check whether there is metal or other
objects in the connection range that affect the
connection.
7.After the Bluetooth earbuds are connected to the
Office Web: veatool.cn
No matter the product is lost, outdated, broken or
you just don’t like this product, please contact our
her best to give you a satisfactory answer.
Customer Sopport
5.Pls put the items and accessories to the places
which can not be touched by kids or pets to avoid
any unexpected accidents.
6.Earbuds and charging case are with built in
rechargeable battary,can not be dis-assembled ,Pls
make sure the earbuds and case are fully charged
before using it for first time.
1.keep this product away from high temperature
areas.
2.Please try to use qualified chargers and charging
cables, and try to avoid using high current and
voltage fast charging devices to charge this product.
3.The waterproof grade of this product is IPX5,
please choose the appropriate scene to use this
product.
4.Do not disassemble or refit the earbuds for any
reason, it make broken or born the earbuds, Please
send it to sales agency to repair.
Safety Problem：
mobile phone, can the earphone be used to control
the applications on the mobile phone?The software
settings of device applications may be different, so
that the functions of individual applications do not
support the earphone controlling.
Table of contents
Other Veatool Headphones manuals
