Vecow UE-1000 User manual
USER
Manual
USER
Manual
1.0.0 Edition 20150213
UE-1000
PCI Express x4, 8 Ports/ 4 Ports USB 3.0 Expansion Card
ii
Version Date Page Description Remark
0.9 01/20/2015 All Preliminary Release
1.0 02/13/2015 All Ofcal Release
Record of Revision
iii
This manual is released by Vecow Co., Ltd. for reference purpose only. All product
offerings and specifications are subject to change without prior notice. It does not
represent commitment of Vecow Co., Ltd. Vecow shall not be liable for direct, indirect,
special, incidental, or consequential damages arising out of the use of the product or
documentation, nor for any infringements upon the rights of third parties, which may
result from such use.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
FCC
The product (s) described in this manual complies with all applicable European Union
(CE) directives if it has a CE marking. For computer systems to remain CE compliant,
only CE-compliant parts may be used. Maintaining CE compliance also requires
proper cable and cabling techniques.
CE
This document contains proprietary information protected by copyright. No part of this
publication may be reproduced in any form or by any means, electric, photocopying,
recording or otherwise, without prior written authorization by Vecow Co., Ltd.
The rights of all the brand names, product names and trademarks belong to their
respective owners.
Declaimer
Declaration of Conformity
Copyright and Trademarks
iv
Order Information
Part Number Description
UE-1004 PCI Express x4, 4 Ports USB 3.0 Expansion Card
UE-1008 PCI Express x4, 8 Ports USB 3.0 Expansion Card
v
Table of Contents
1 GENERAL INTRODUCTION 1
1.1 Overview 1
1.2 Features 1
1.3 Product Specication 2
1.3.1 Specications of Vecow UE-1004 2
1.3.2 Specications of Vecow UE-1008 2
1.4 Mechanical Dimension 3
1.4.1 UE-1004 3
1.4.2 UE-1008 3
2 GETTING TO KNOW YOUR UE-1000 4
2.1 Packing List 4
2.2 I/O and Indication 4
2.3 Jumper Setting for Current Limit 5
3 GETTING START 6
3.1 Installing UE-1004/ UE-1008 6
4 DRIVER INSTALLATION AND SETTING 8
4.1 Driver Installation 8
4.2 Power On/ O Control 11
CHAPTER
CHAPTER
CHAPTER
CHAPTER
1
GENERAL INTRODUCTION
GENERAL INTRODUCTION
UE-1000 is a series of USB 3.0 expansion cards which is powered by
independent USB 3.0 host chips. With the latest USB 3.0 technology,
UE-1000 series USB 3.0 expansion card delivers 10-times data
transfer rate, up to 5Gbps, to make performance driven plug-and-
play system possible for Traffic Surveillance, Logistics, Factory
Automation, Machine Vision, Factory Inspection, Medical, Security
and any SuperSpeed data transportation applications.
1
1.1 Overview
1.2 Features
• 4 Independent USB 3.0 Controllers
• Up to 8 USB 3.0 Ports
• Smart Current Protection : 900mA/ 1500mA
• Remote Power-on/ Power-o Management by each port
(Optional)
• USB 3.0 Rev. 1.0 compliant
• Intel® xHCI Rev. 1.0 compliant
• PCI Express x4 Interface
2
GENERAL INTRODUCTION
©Vecow UE-1000 User Manual
1.3 Product Specication
1.3.1 Specications of Vecow UE-1004
USB
Interface PCI Express x4
Chipset 4 Renesas μPD720202 Host Controllers
Compliant with Universal Serial Bus 3.0 specication Revision 1.0
Compliant with Intel® xHCI specication Revision 1.0
Connector 4 USB 3.0 Type-A Connectors
Current Protection User-congurable 900mA/1500mA per-port current limit (Jumper)
Data Rate SuperSpeed (5Gbps)/ High-Speed (480Mbps)/ Full-Speed
(12Mbps)/ Low-Speed (1.5Mbps)
Environment
Operating
Temperature
0°C to 70°C (32°F to 158°F)
Storage
Temperature
-40°C to 85°C (-40°F to 185°F)
Certications FCC, CE, RoHS Compliance
Mechanical
Dimension (WxDxH) 168mm x 121mm x 21mm (6.6" x 4.8" x 0.8")
1.3.2 Specications of Vecow UE-1008
USB
Interface PCI Express x4
Chipset 4 Renesas μPD720202 Host Controllers
Compliant with Universal Serial Bus 3.0 specication Revision 1.0
Compliant with Intel® xHCI specication Revision 1.0
Connector 8 USB 3.0 Type-A Connectors
Current Protection User-congurable 900mA/1500mA per-port current limit (Jumper)
Data Rate SuperSpeed (5Gbps)/ High-Speed (480Mbps)/ Full-Speed
(12Mbps)/ Low-Speed (1.5Mbps)
Environment
Operating
Temperature
0°C to 70°C (32°F to 158°F)
Storage
Temperature
-40°C to 85°C (-40°F to 185°F)
Certications FCC, CE, RoHS Compliance
Mechanical
Dimension (WxDxH) 168mm x 121mm x 21mm (6.6" x 4.8" x 0.8")
3
GENERAL INTRODUCTION
1.4 Mechanical Dimension
1.4.1 UE-1004
1.4.2 UE-1008
9.5 (0.37”)
19 (0.75”)
167.65 (6.6”)
98.4 (3.87”)
21.1 (0.83”)
121 (4.76”)
180.44 (7.1”)
Unit: mm (inch)
167.65 (6.6”)
9.5 (0.37”)
21.1 (0.83”)
121 (4.76”)
180.44 (7.1”)
Unit: mm (inch)
98.4 (3.87”)
4
GETTING TO KNOW YOUR UE-1000©Vecow UE-1000 User Manual
GETTING TO KNOW YOUR UE-1000
2.1 Packing List
2
Item Description Qty
1UE-1000, PCI Express x4, 8 Ports/4 Ports
USB 3.0 Expansion Card
(According to the conguration you order.)
1
2Accessory box, which contains
Vecow Drivers & Utilities DVD 1
2.2.1 USB Connectors
The UE-1000 comes with 8 USB 3.0. These USB 3.0 ports allow
data transfers up to 5 Gbps. The controller supports SuperSpeed
(SS), High-Speed (HS), Full-Speed (FS) and Low-Speed (LS) trafc
on the bus.
2.2 I/O and Indication
CN1
CN2
CN3
CN4
CN5
CN6
CN7
CN8
5
GETTING TO KNOW YOUR UE-1000
User-congurable 900mA and 1500mA current limit.
2.3.1 Current limit jumpers
2.3 Jumper Setting for Current Limit
JP1
JP2
JP3
JP4
JP5
JP6
JP7
JP8
Jumper Pin
900 mA 1-2 (Default)
1500 mA 2-3
6
GETTING START©Vecow UE-1000 User Manual
GETTING START
3.1 Installing UE-1004/ UE-1008
3
Step 1. Insert UE-1004/ UE-1008 golden nger and PCI
bracket into PCIe socket carefully.
Step 2. Make sure golden nger and PCI bracket was
inserted smoothly.
7
GETTING START
Step 3. Make sure the bracket aligns screw hole.
Step 4. Fasten the M3 screw.
8
DRIVER INSTALLATION AND SETTING
©Vecow UE-1000 User Manual
DRIVER INSTALLATION AND SETTING
4.1 Driver Installation
System OS: Windows
You can install the Windows driver for Vecow UE-1004 / UE-1008
manually by following the steps listed below :
4
Step 1. Execute RENESAS-USB3-Host-Driver-30230-setup.exe
and then go “Next” step.
9
DRIVER INSTALLATION AND SETTING
Step 2. Accept the terms of the license agreement and then go
“Next” step.
Step 3. Click “Install” to begin installation.
10
DRIVER INSTALLATION AND SETTING
©Vecow UE-1000 User Manual
Step 4. Waiting for driver installation.
Step 5. Click into “Control Panel” “Device Manager”.
Check Vecow UE-1004/UE-1008 driver setup success.
11
DRIVER INSTALLATION AND SETTING
4.2 Power On/ O Control
UE-1000 series include USB port power ON/OFF function and help
to maintain on eld operation.
Step 1. Every power source of USB port are independent, we could
ON/OFF directly thought SW thread. The device control Line
is SMbus that connect to all SMbus devices on the PCB.
Step 2. At rst , you need nd out your SMbus base address :
* Here you could nd the I/O Range F040-F05F,
IRQ is 0x00000005(05).
* The 0xF040 is start address(SMB_BASE) of SMbus function
12
DRIVER INSTALLATION AND SETTING
©Vecow UE-1000 User Manual
Step 3. SMbus IO Address Mapping table
13
DRIVER INSTALLATION AND SETTING
Step 4. To Access SMBus register , below shows standard Read/Write
scenarios. You refer to demo code that follow SMbus protocol
to complete the process.
void smbwrite(Data_BYTE device_id, Data_BYTE reg_no,
unsigned char data)
{
Data_BYTE err_no;
WriteAByte(SMBus_Host_Status, 0xFF);
Delay_T(1);
err_no = Check_SMBus_Ready();
if (err_no != 0) return;
WriteAByte(SMBus_Trans_Addr, device_id);
WriteAByte(SMBus_Host_Command, reg_no);
WriteAByte(SMBus_Host_Data0, data);
WriteAByte(SMBus_Host_Control, 0x48);
Delay_T(200);
Check_SMBus_Ready();
}
14
DRIVER INSTALLATION AND SETTING
©Vecow UE-1000 User Manual
Data_BYTE smbread(Data_BYTE device_id, Data_BYTE reg_no,
unsigned char *dat)
{
Data_BYTE err_no;
WriteAByte(SMBus_Host_Status, 0xff);
WriteAByte(SMBus_Host_Data0, 0x00);
err_no = Check_SMBus_Ready();
if (err_no != 0) return err_no;
WriteAByte(SMBus_Trans_Addr, device_id+1);
WriteAByte(SMBus_Host_Command, reg_no);
WriteAByte(SMBus_Host_Control, 0x48);
Delay_T(20);
err_no = Check_SMBus_Ready();
if (err_no != 0) return err_no;
*dat = ReadAByte(SMBus_Host_Data0);
return (err_no); //Data 0
}
15
DRIVER INSTALLATION AND SETTING
Step 5. Control USB port
a. Access Output port / Input port
b. USB port ON/OFF register = 0x02
Reg.0x20 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
PE-1008 8 7 6 5 43 2 1
PE-1004 X4X 3 X 2 X 1
* If more help is needed, please contact Vecow Technical Support
Table of contents
Other Vecow PCI Card manuals
