Vello BG-N7 User manual

BG-N7
BATTERY GRIP
Designed For The Nikon D800/
D800E SLR Cameras
USER’S MANUAL

Introduction
Thank you for choosing Vello and congratulations
on your new BG-N7battery grip purchase. Enjoy
the many benefits that a battery grip offers, such as
extended shooting time and more control and comfort
when shooting in a vertical (portrait) orientation.
The Vello BG-N7is compatible with the Nikon D800/
D800E DSLR cameras. The BG-N7accepts one
Nikon EN-EL15 rechargeable battery, in addition
to the camera’s internal battery. Eight AA batteries
(alkaline, Ni-MH, lithium, or nickel-manganese) can
be used instead for added convenience. The BG-N7
is equipped with an alternate shutter-release button,
AF-ON button, multi selector, and main and sub-
command dials for shooting in a vertical position.
Please read through this entire manual before
using the BG-N7battery grip.
2

Precautions
1. The BG-N7should only be used with compatible
devices specified in this manual.
2. Only use with batteries and battery holders
recommended in this manual. The BG-N7can not
be used with other batteries or battery holders.
3. Cover the power terminal with the contact cap
when the BG-N7is not in use. This prevents
electrical shorts caused by metal objects touching
the power terminals.
4. When the battery holder is removed from the
grip, remove the batteries or place the holder in
a container to prevent electrical shorts caused by
contact with other metal objects.
5. The memory card access lamp may light up when
the BG-N7is mounted or removed from the
camera. This is part of the normal operation.
6. If you notice smoke, an unusual smell or noise from
the battery pack, discontinue use immediately.
Remove the batteries and take the device to a
Vello authorized reseller.
7. The BG-N7does not have a power switch.
Instead, use the camera power switch to turn the
power on or off.
8. The battery level may not display properly if
batteries are inserted before mounting the grip.
9. Remove batteries from the grip when not in use.
10. Do not attempt to disassemble.
11. Avoid water or extreme humidity and keep in a
dry and cool place.
12 . Keep out of reach of children.
3
OVERVIEW INTRODUCTIONASSEMBLYOPERATION

Overview
1
2
4
3
6
9
8
7
10
12
13
14
15
11
5
16
19
18
17
4

OVERVIEW INTRODUCTIONASSEMBLYOPERATION
1Sub-Command Dial *
2Shutter-Release Button *
3Control Lock Switch
To prevent accidental triggering, the
control lock switch locks the shutter-
release button, AE-ON button, multi
selector dial, as well as the main and
sub-command dials on the BG-N7.
Unlock prior to use by switching to
the position. The control lock is not
a power switch.
4Tripod Socket
5Mounting Screw
6Contact Cap
7Camera Contact Cover Holder
8Power/Signal Contacts
9AF-ON Button *
10 Main Command Dial *
11 Multi Selector *
12 Locking Wheel
13 Battery Chamber Cover
14 Battery Chamber Latch
15 Battery Chamber
16 EN-EL15 Battery Holder
Holder for Nikon EN-EL15 batteries.
17 Power Terminals (EN-EL15 Holder)
18 AA Battery Holder
Holder for eight AA batteries.
19 Power Terminals (AA Holder)
* These controls perform the same
function as their on-camera equivalents
and are affected by changes to the
Custom Settings menu (Group a for
the AF-ON button, Group f for other
controls). See camera manual for
details.
5

Attaching The Grip
1. Ensure that the power is
turned off on the camera
and that the Control Lock
on the BG-N7is in the L
position before attaching
the grip.
2. Remove the contact cap
from the BG-N7battery
grip. Replace the cap when
not in use to protect the
contacts.
3. The contacts for the BG-
N7are on the bottom of
the camera where they
are protected by a contact
cover. Remove the contact
cover before mounting the
grip.
6

4. To prevent loss, place the
camera contact cover in
the contact cover holder
on the BG-N7.
5. Connect the BG-N7
grip to the camera,
while aligning the grip’s
mounting screw with the
camera’s tripod socket.
6. Rotate the attachment
wheel in the direction
shown by the LOCK arrow
until it is firmly tightened.
Removing the battery from
the camera before mounting
the grip is not required.
7
OVERVIEW INTRODUCTIONASSEMBLYOPERATION

Inserting Batteries
1. Ensure that the power is turned off on the
camera and the Control Lock on the BG-N7
is in the Lposition. Turn the battery-chamber
latch counter-clockwise to open the battery
chamber door.
2. Remove the battery holder from the BG-N7
grip. The EN-EL15battery holder comes pre-
installed when shipped.
8

3. Nikon EN-EL15 Batteries:
Matching the indentations
on the battery with the
EN-EL15holder, press
the battery down and
slide it in the direction of
the arrow until the power
terminals click into place.
4. AA Batteries: Place eight
AA batteries of the same
type in the AA battery
holder as shown, while
ensuring that they are in
the correct orientation.
5. Insert the battery holder
into the grip. Close the
battery chamber and then
turn the latch clockwise
to lock. Turn the camera
on and check the battery
level in the control panel
or viewfinder.
OVERVIEW INTRODUCTIONASSEMBLYOPERATION
9

The camera displays the following battery levels .
Nikon EN-EL15 Battery:
Control Panel Viewfinder Description
Battery fully
charged.
Battery partially
discharged.
Low battery.
Prepare spare
batteries.
(blinking) (blinking)
Battery
exhausted.
Shutter release is
disabled.
AA Batteries:
Control Panel Viewfinder Description
Battery fully
charged.
Low battery.
Prepare spare
batteries.
(blinking) (blinking)
Battery
exhausted.
Shutter release is
disabled.
Battery Info
10