Vello LAE-MFT-CEFA User manual

AUTO
LENS ADAPTER
 
LAE-MFT-CEFA
Canon EF/EF-S Lens to
Micro Four Thirds Mount

2
This Vello Lens Adapter is
for attaching Canon EF and
EF-S lenses to a Micro Four
Thirds mount. It supports
autofocus (AF) with select
Canon lenses, and maintains
auto exposure (AE) as
well as aperture control
with most other lenses.
The adapter also delivers
metadata for your pictures.
The inside of the adapter is
coated to reduce any stray
reflections and maximize
picture quality. The tripod
foot is detachable and
has a /4-inch socket for
attaching to most tripods.
THANK YOU FOR CHOOSING VELLO

3
• Vello LAE-MFT-CEFA
Lens Adapter for Canon
EF/EF-S lens to Micro
Four Thirds mount
• Front and Rear Caps
• Removable Tripod Foot
• User Manual
CONTENTS

4
• Please read and follow
these instructions, and
keep this manual in a
safe place.
• Avoid sandy or dusty
environments when using
this adapter.
• Handle the adapter with
care—don’t drop it, and
avoid bumps and shocks.
• Clean the adapter by
wiping it with a soft,
dry cloth.
• Do not use solvents such
as benzene, alcohol, or
detergents to clean the
adapter.
• Be sure to read the
operating instructions for
your digital camera.
PRECAUTIONS

5
• Keep this unit away from
children.
• Keep this unit away from
water and flammable
gases or liquids.
• Do not attempt to
disassemble or repair
the equipment—doing
so will void the warranty,
and Vello will not be
responsible for any
damage.
• Handle the unit with
care.
• All images are for
illustrative purposes only.

Micro Four
Thirds Mount
Front Back
/4"-20 Tripod Socket
EF/EF-S
Lens Mount
EF Lens Alignment
Dot (Red)
EF-S Lens Alignment Dot
(White) Lens Release
Button Camera Mount
Alignment Dot
Tripod Foot
Tripod Foot
Mounting Wheel
6
OVERVIEW

7
. Turn the camera's power
o and remove all caps
before mounting. Line
up the alignment dots
and carefully insert the
adapter.
2. Rotate the adapter
clockwise until it locks
into place.
MOUNTING THE LENS ADAPTER

8
3. Line up the alignment
dots on the lens and the
adapter. Then carefully
insert the lens into the
adapter.
4. Rotate the lens clockwise
until it locks.
5. Turn your camera on.

9
. Turn the camera’s
power o.
2. Press and hold the
release pin on the lens
adapter, and rotate the
lens counterclockwise
to detach.
REMOVING THE LENS ADAPTER

0
3. Press and hold the lens
release button on the
camera.
4. Rotate the lens adapter
counterclockwise to
release, and carefully
detach the lens adapter
from the camera.
5. Reattach the lens
adapter's front and rear
caps.


. Align the tripod foot’s
mounting screw with
the mounting hole on
the bottom of the lens
adapter.
2. Carefully rotate the
tripod foot’s mounting
wheel clockwise until the
foot is securely attached.
MOUNTING THE TRIPOD COLLAR

2
REMOVING THE TRIPOD COLLAR
Rotate the mounting
wheel counterclockwise
until the collar is loose
enough to remove from
the lens adapter.
Note: If your lens has a built-in
tripod collar, use the collar on
the lens to mount the assembly
to the tripod.

3
SPECIFICATIONS
Compatible Lenses Canon EF and EF-S
Compatible Cameras Micro Four Thirds System
Front Mount Canon EF/EF-S
Rear Mount Micro Four Thirds
Tripod Foot /4-20 inch socket
Dimensions with Tripod
Foot (H × W × D) 3.25 × 2.75 × .4 inches (8.3 × 7 × 3.5 cm)
Weight 7.6 oz. (27 g)

4
This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship
under normal consumer use for a period of one () year from the original purchase date or thirty (30) days
after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited
warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails
during normal use of this product in its intended manner and in its intended environment. Inoperability of
the product or part(s) shall be determined by the warranty provider. If the product has been discontinued,
the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper
installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty
provides you with specific legal rights, and you may also have additional rights that vary from state to state.
ONE-YEAR LIMITED WARRANTY

5
To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise
authorization (“RMA”) number, and return the defective product to Vello along with the RMA number
and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.vellogear.com or call Customer Service at 22-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
VELLO is a registered trademark of the Gradus Group.
© 207 Gradus Group LLC. All Rights Reserved.

www.vellogear.com All other trademarks are the property of their respective owners.
© Copyright 207 Gradus Group GG2