Vello Screen Protector Ultra User manual

SCREEN
PROTECTOR
ULTRA
ULTRA-CLEAR OPTICAL GLASS
FOR SONY
USER MANUAL

Introduction
Thank you for choosing Vello.
Congratulations on the purchase of your Vello Screen Protector Ultra. This screen protector is designed for long-term use to
protect your camera’s LCD from scratches, dust, smears, and even impact. It adheres to the LCD without leaving behind any sticky
residue, and it’s rigid, so it’s easy to apply without trapping any air bubbles underneath. The Vello Screen Protector Ultra is made
from ultra-clear, UV-protective Japanese optical glass that won’t aect the LCD’s image quality—in fact, you can barely tell it’s there!
To remove the Vello Screen Protector Ultra, push the screen protector to the side until you can lift it up to remove it completely.
Note: Select
Sony cameras
can develop
delamination of
the LCD screen
components.
Removing the
screen protector
from a faulty LCD
screen can cause
further damage.
Box Contents
•Vello Screen Protector Ultra
•Wet wipe
•Microfiber cleaning cloth
•Plastic applicator
•User manual (this booklet)
Please read these instructions carefully before applying your Vello Screen Protector Ultra.
1. Remove any
films or other
intervening
substances from
your camera’s
LCD.
2. Clean the LCD
with the wet
wipe and then
wipe it dry with
the microfiber
cleaning cloth.
3. Peel o tape A
from the screen
protector. Be
careful not
to get any
fingerprints
on this side
of the screen
protector.
4. Make sure
your camera
is on a stable
surface, and
align the screen
protector with
you camera’s
LCD.
5. Press down
firmly on the
center of
the screen
protector and
push outwards
to apply.
6. Use the plastic
applicator to
smooth out any
air bubbles by
pushing them
out to the edge
of the screen
protector.
7. Peel o tape B
from the screen
protector.

All other trademarks are the property of their respective owners
GG3
www.vellogear.com
One-Year Limited Warranty
This VELLO product is warranted to the original purchaser to be free from defects in materials
and workmanship under normal consumer use for a period of one (1) year from the original
purchase date or thirty (30) days after replacement, whichever occurs later. The warranty
provider’s responsibility with respect to this limited warranty shall be limited solely to repair
or replacement, at the provider’s discretion, of any product that fails during normal use of this
product in its intended manner and in its intended environment. Inoperability of the product
or part(s) shall be determined by the warranty provider. If the product has been discontinued,
the warranty provider reserves the right to replace it with a model of equivalent quality and
function.
This warranty does not cover damage or defect caused by misuse, neglect, accident,
alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN,
THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty
provides you with specific legal rights, and you may also have additional rights that vary from
state to state.
To obtain warranty coverage, contact the Vello Customer Service Department to obtain a
return merchandise authorization (“RMA”) number, and return the defective product to Vello
along with the RMA number and proof of purchase. Shipment of the defective product is at the
purchaser’s own risk and expense.
For more information or to arrange service, visit www.vellogear.com or call Customer Service
at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
VELLO is a registered trademark of the Gradus Group.
© 2019 Gradus Group LLC. All Rights Reserved.