Vello IR Selfie Trigger Plus IR-SPC User manual

IR SELFIE
TRIGGER
PLUS
INFRARED REMOTE
SHUTTER CONTROL
IR-SPC, IR-SPP,
IR-SPS, IR-SPM
 
This device complies with
Part 5 of the FCC Rules.
Operation is subject to the
following two conditions:
. This device may
not cause harmful
interference.
2. This device must accept
any interference received,
including interference
that may cause undesired
operation.
FCC
COMPLIANCE

The Vello Selfie Trigger Plus is a wireless infrared remote
that lets you trigger your camera and utilize various
functions from a distance of up to 6ft. This makes it
Ideal for taking selfies and group pictures. When shooting
macro or long-exposure photography, the remote will
minimize camera shake, providing you with sharper images.
Additional features include shooting photos with a two
second delay timer, start and stop video recording, and the
ability to control your zoom. The Vello Selfie Trigger Plus
is sleek, lightweight, and easily fits in your pocket.
Note: Functions vary depending on camera make and model.
THANK YOU FOR CHOOSING VELLO
• Please read and follow these instructions, and keep this
manual in a safe place.
• There are no user-serviceable parts inside the devices. Do
not attempt to disassemble or perform any unauthorized
modification.
• Do not operate in the presence of flammable gas, vapors
or water.
• Keep out of reach of children. This device contains small
parts which may pose a shock hazard.
• Batteries are prone to leakage when fully discharged.
To avoid damage to the product, be sure to remove the
battery when leaving the product unattended for prolonged
periods or when no charge remains.
• Do not use or leave the device in conditions of extreme
heat, severe cold, or high humidity.
PRECAUTIONS

IR Selfie Trigger Plus
IR Selfie Trigger Plus
The Vello Selfie Trigger Plus is compatible with
most cameras that have infrared sensors. Check
www.vellogear.com for a list of compatible cameras.
Remove the plastic separator from the
battery before use by pulling the tab.
Important Note: Infrared technology requires line-of-sight
communication between the two devices. Make sure there are no
obstructions between the remote and your camera's sensor.
GETTING STARTED
OVERVIEW
IR-SPC, IR-SPP, IR-SPS
IR-SPM
Front
Front
Back
Back
Shutter
release
button
Shutter
release
button
Infrared
transmitter
Infrared
transmitter
Battery
compartment
Battery
compartment
Function
selector
Function
selector
Camera
selector

REMOTE FUNCTIONS
Function
Selector Description
Single Shot - Press the shutter release button
to trigger the camera for a single picture.
Bulb Mode - For long exposures, press
the shutter release button once to
begin exposure. Press again to stop.
/
Delay Timer - Delays the shutter release by
two seconds. Use for selfies or candid shots.
Video - Press the shutter release once
to start recording video. Press again to
stop. (Camera must be in video mode)
Function
Selector Description
Single Shot - Press the shutter release button
to trigger the camera for a single picture.
Bulb Mode - For long exposures, Press
the shutter release button once to
begin exposure. Press again to stop.
Delay Timer - Delays the shutter from
exposing the picture by two seconds.
Use for selfies or candid shots.
Video - Press the remote shutter release once
to start recording video. Press again to stop.
IR-SPC – For Canon
IR-SPS – For Sony

IR-SPM – For Multiple Cameras
The IR-SPM provides control of Nikon, Canon, Pentax,
and Sony cameras, all in one remote. The table below
indicates the switch positions used for each function.
For descriptions of this remote's, functions please
refer to the previous tables: IR-SPC, IR-SPP, IR-SPS.
Note: The IR-SPM adds the functionality of single-shot triggering of
Nikon cameras.
Function
Selector Description
Single Shot - Press the shutter release button
to trigger the camera for a single picture.
Bulb Mode - For long exposures, Press
the shutter release button once to
begin exposure. Press again to stop.
Telescoping / Wide angle – This allows
you to zoom the lens in and out. (For
select Pentax point-and-shoot cameras)
Function – This defaults to video
recording but can be set to other
functions via the camera’s settings. Press
the remote shutter release once to start
recording video. Press again to stop.
Nikon Canon Sony Pentax
A 2A B C
3A 2B 2C
3A 3B 3C
IR-SPP – For Pentax

The camera will not trigger.
• Make sure the plastic separator is removed from the
battery.
• Make sure the battery is installed with the correct polarity.
• Set your camera for remote triggering.
• Make sure there is nothing blocking the line of sight
between the Selfie Trigger and your camera’s IR sensor.
• Make sure you are within the remote’s range of 6 feet.
TROUBLESHOOTING
To use your IR-SPC, IR-SPP, IR-SPS, IR-SPM as a remote
trigger, turn your camera on and follow these steps:
. Set your camera for remote triggering. For more
information about the remote triggering feature, consult
your camera’s manual.
2. Compose your shot and make sure your subject is in focus.
3. Set your Selfie Trigger Plus remote and camera to the
desired settings.
4. Aim the remote at the camera’s infrared sensor and press
the shutter release button.
REMOTE TRIGGERING

SPECIFICATIONS
Dimensions (H × W × D) 0.42"× .22"× 2.4"
( × 3 × 6 mm)
Weight 0.5 oz (4 g)
Operating distance 5'(4.6 m)
Operating temperature 4°F–04°F (5°C–40°C)
Battery type 3 V CR2025
Typical battery life Up to 3 years or
20,000 exposures
To replace the battery,
follow these steps:
. Turn the remote upside
down.
2. In the slot provided, use
your fingernail to open
and pull the battery tray
out of the remote.
3. Remove the old battery
and replace it with a
new one, making sure
the battery’s polarity
matches the diagram on
the compartment.
4. Slide the battery tray
back into the remote
until it locks in place.
REPLACING THE BATTERY

ONE-YEAR LIMITED WARRANTY
This VELLO product is warranted to the original purchaser
to be free from defects in materials and workmanship
under normal consumer use for a period of one () year
from the original purchase date or thirty (30) days after
replacement, whichever occurs later. The warranty provider’s
responsibility with respect to this limited warranty shall be
limited solely to repair or replacement, at the provider’s
discretion, of any product that fails during normal use of
this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be
determined by the warranty provider. If the product has been
discontinued, the warranty provider reserves the right to
replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused
by misuse, neglect, accident, alteration, abuse, improper
installation or maintenance. EXCEPT AS PROVIDED
HEREIN, THE WARRANTY PROVIDER MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. This warranty
provides you with specific legal rights, and you may also
have additional rights that vary from state to state.
To obtain warranty coverage, contact the Vello Customer
Service Department to obtain a return merchandise
authorization (“RMA”) number, and return the defective
product to Vello along with the RMA number and
proof of purchase. Shipment of the defective product
is at the purchaser’s own risk and expense.
For more information or to arrange service, visit
www.vellogear.com or call Customer Service at 22-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
VELLO is a registered trademark of the Gradus Group.
© 205 Gradus Group LLC. All Rights Reserved. GG1